Behringer DJX400

పరిచయం

This instruction manual provides comprehensive guidance for the Behringer DJX400 2-channel DJ Mixer. It covers essential information regarding product setup, operational procedures, maintenance, and troubleshooting. Familiarize yourself with this manual to ensure optimal performance and longevity of your DJX400 mixer.

ముందు view of the Behringer DJX400 DJ Mixer, showing its two channels, faders, EQ controls, crossfader, and master section.

సెటప్

Follow these steps to properly set up your DJX400 mixer.

1. అన్ప్యాకింగ్ మరియు తనిఖీ

• Carefully remove the mixer from its packaging.
• Inspect the unit for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately.
• Ensure all accessories, including the power cable, are present.

2. ఆడియో మూలాలను కనెక్ట్ చేయడం

The DJX400 features two dual-input stereo channels. Each channel can accept either PHONO (turntable) or LINE (CD player, media player) level signals.

• PHONO Inputs (RCA): Connect turntables to the PHONO inputs. Ensure your turntables have a ground wire connected to the mixer's ground terminal (if available) to reduce hum.
• LINE Inputs (RCA): Connect CD players, media players, or other line-level audio devices to the LINE inputs.
• MIC Input (1/4" TRS): Connect a microphone to the 1/4" TRS input on the front panel.

3. ఆడియో అవుట్‌పుట్‌లను కనెక్ట్ చేస్తోంది

• MASTER Output (RCA): Connect this output to your main PA system or amplifier. This is your primary audio output.
• BOOTH Output (RCA): Connect this output to a monitor speaker system in your DJ booth. This allows you to hear your mix independently of the main output.
• REC అవుట్‌పుట్ (RCA): Connect this output to a recording device (e.g., a digital recorder, computer audio interface) to capture your mix.
• HEADPHONE Output (1/4" TRS): Connect your headphones to this jack for monitoring.

4. పవర్ కనెక్షన్

• Ensure the mixer's power switch is in the OFF position.
• Connect the provided power cable to the mixer's power inlet and then to a suitable AC power outlet.
• Power on your audio sources and amplifiers before turning on the mixer.
• Finally, switch the DJX400 power ON.

ఆపరేటింగ్

This section details the functions of the DJX400's controls and how to operate the mixer.

1. ఛానల్ నియంత్రణలు

Each of the two stereo channels features the following controls:

• INPUT SELECT Switch: Toggles between PHONO and LINE inputs for the respective channel.
• నియంత్రణ సంపాదించు: Adjusts the input sensitivity for the channel. Set this so the channel's peak LED occasionally flashes, but does not stay lit.
• 3-Band KILL EQ: Provides -32 dB attenuation for HIGH, MID, and LOW frequencies. Use these to sculpt the sound of each track.
• CHANNEL FADER: Controls the volume level of the individual channel.
• PFL (Pre-Fader Listen) Button: Routes the channel's audio to the headphone output for monitoring before it reaches the main mix.

2. క్రాస్‌ఫేడర్

The DJX400 features a super-smooth dual-rail "Ultraglide" crossfader designed for up to 500,000 life cycles.

• క్రాస్‌ఫేడర్: Blends between Channel 1 and Channel 2. Moving it to the left emphasizes Channel 1, and to the right emphasizes Channel 2.
• CROSSFADER CURVE Control: Adjusts the response curve of the crossfader. A sharp curve is ideal for scratching, while a smooth curve is better for blending.

3. Master Section

• మాస్టర్ స్థాయి: Controls the overall output volume of the mixer to the main PA system.
• బూత్ లెవెల్: Adjusts the volume of the BOOTH output for your monitor speakers.
• MIC స్థాయి: Controls the volume of the microphone input.
• XPQ 3D SURROUND: Activates and adjusts the XPQ 3D surround effect, which widens the stereo image and adds transparency to the sound. Turn the knob to increase the effect.

4. Headphone Section

• హెడ్‌ఫోన్ స్థాయి: హెడ్‌ఫోన్ అవుట్‌పుట్ వాల్యూమ్‌ను సర్దుబాటు చేస్తుంది.
• PFL/MAIN MIX Control: Blends between the PFL (pre-fader listen) signal and the main mix in your headphones.
• SPLIT/STEREO Switch: In SPLIT mode, the PFL signal is sent to one ear and the main mix to the other. In STEREO mode, both signals are mixed in stereo.

5. BPM Counter

The intelligent dual auto-BPM counter displays the beats per minute for both channels, aiding in beatmatching.

• The display shows the BPM for the active channel or the channel selected for PFL.
• Use the BPM display to visually match the tempo of two tracks before crossfading.

నిర్వహణ

Proper maintenance ensures the longevity and reliable operation of your DJX400 mixer.

క్లీనింగ్

• Always disconnect the mixer from power before cleaning.
• Use a soft, dry, lint-free cloth to wipe down the exterior surfaces.
• మొండి ధూళికి, కొద్దిగా damp తేలికపాటి సబ్బు ఉన్న వస్త్రాన్ని ఉపయోగించవచ్చు, తరువాత పొడి వస్త్రాన్ని ఉపయోగించవచ్చు.
• Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and internal components.
• Keep faders and knobs free from dust and debris. Compressed air can be used carefully to clear dust from crevices.

నిల్వ

• ఉపయోగంలో లేనప్పుడు, మిక్సర్‌ను ప్రత్యక్ష సూర్యకాంతి మరియు తీవ్రమైన ఉష్ణోగ్రతలు లేకుండా చల్లని, పొడి ప్రదేశంలో నిల్వ చేయండి.
• Protect the mixer from dust by covering it with a dust cover.

ట్రబుల్షూటింగ్

This section addresses common issues you might encounter with your DJX400 mixer.

స్పెసిఫికేషన్లు

Key technical specifications for the Behringer DJX400 DJ Mixer:

వారంటీ మరియు మద్దతు

Behringer products are designed for reliability and performance. For detailed warranty information and technical support, please refer to the official Behringer webసైట్‌లో లేదా మీ స్థానిక అధీకృత డీలర్‌ను సంప్రదించండి. ఏవైనా వారంటీ క్లెయిమ్‌లకు కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదును ఉంచండి.

• ఆన్‌లైన్ మద్దతు: Visit the official Behringer webతరచుగా అడిగే ప్రశ్నలు, సాఫ్ట్‌వేర్ డౌన్‌లోడ్‌లు మరియు మద్దతు వనరుల కోసం సైట్.
• సేవా కేంద్రాలు: Locate authorized service centers for repairs and maintenance.