COX M75 75 ml. x 75 ml. Cartridge Manual Epoxy Applicator

1. ఉత్పత్తి ముగిసిందిview

An image of the COX M75 manual epoxy applicator, featuring a blue frame, black handle, and metal components for dispensing dual cartridges.

కీ ఫీచర్లు

• Dedicated mix ratio 1:1
• Stubby cartridge system
• మెకానికల్ అడ్వాన్tagఇ 18:1
• Support discs - secure and accurate cartridge fit
• Wear Compensating Device (WCD)
• Catch plate - sintered steel
• High viscosity materials capability

ఉత్పత్తి వివరణ

The COX M75 is a manual dispenser designed for dual 75ml x 75ml cartridges. It features a stubby cartridge system and provides a mechanical advantage of 18:1, making it suitable for use with low to medium viscosity materials. The applicator includes support discs to ensure a secure and accurate cartridge fit, a durable sintered steel catch plate, and a wear compensating device for extended product life. COX is a recognized leader in quality applicators, with all products manufactured to rigid quality management standards for reliability and durability.

2. భద్రతా సమాచారం

Always read and understand all safety warnings and instructions before operating this applicator. Failure to do so may result in injury or damage to the product.

• కంటి రక్షణ: Always wear appropriate eye protection (safety glasses or goggles) when handling epoxy materials and operating the applicator.
• చర్మ రక్షణ: Wear chemical-resistant gloves to prevent skin contact with epoxy resins, which can cause irritation or sensitization.
• వెంటిలేషన్: Use the applicator in a well-ventilated area to avoid inhaling fumes from epoxy materials.
• మెటీరియల్ సేఫ్టీ డేటా షీట్లు (MSDS): Refer to the MSDS provided by the epoxy material manufacturer for specific handling, storage, and disposal instructions.
• సరైన పారవేయడం: Dispose of used cartridges and any epoxy waste according to local regulations.
• పిల్లలకు దూరంగా ఉంచండి: Store the applicator and epoxy materials in a secure location away from children and pets.
• ఉపయోగం ముందు తనిఖీ చేయండి: Before each use, inspect the applicator for any signs of damage or wear. Do not use if damaged.

3. సెటప్

1. Prepare Cartridges: Ensure the dual 75ml x 75ml epoxy cartridges are at the recommended temperature for dispensing as specified by the epoxy manufacturer. Remove any caps or seals from the cartridge nozzles.
2. రిట్రాక్ట్ ప్లంగర్: Pull the plunger rod of the applicator all the way back until it locks into place, creating space for the cartridges.
3. Insert Cartridges: Carefully insert the dual epoxy cartridges into the applicator's frame. Ensure the cartridge nozzles are aligned with the front opening and the base of the cartridges rests securely against the support discs. The stubby cartridge system is designed for a precise fit.
4. మిక్సింగ్ నాజిల్‌ను అటాచ్ చేయండి: Securely attach the appropriate static mixing nozzle to the end of the cartridges. Ensure it is tightly fastened to prevent leaks during dispensing.

4. ఆపరేటింగ్ సూచనలు

1. Initial Dispense (Purge): Before applying to your workpiece, dispense a small amount of material onto a scrap surface. This ensures proper mixing within the nozzle and purges any unmixed material.
2. Apply Material: Position the nozzle at the desired application point. Squeeze the trigger handle to dispense the epoxy. The 18:1 mechanical advantage provides efficient dispensing for low to medium viscosity materials.
3. నియంత్రణ ప్రవాహం: Maintain steady pressure on the trigger for a consistent bead. Release the trigger to stop the flow.
4. ఒత్తిడిని తగ్గించుకోండి: After dispensing, press the thumb release lever (located near the handle) to disengage the plunger rod. This relieves pressure on the cartridges and prevents material from continuing to flow.
5. Remove Cartridges: Once dispensing is complete or if changing cartridges, fully retract the plunger rod and carefully remove the cartridges from the applicator.

5. నిర్వహణ

Proper maintenance ensures the longevity and optimal performance of your COX M75 applicator.

• శుభ్రపరచడం: After each use, clean any epoxy residue from the applicator frame, plunger rod, and especially the sintered steel catch plate. Use a suitable solvent recommended by the epoxy manufacturer for cleaning uncured epoxy. Avoid harsh abrasives that could damage the finish.
• సరళత: Periodically apply a light coat of silicone-based lubricant to the plunger rod to ensure smooth operation.
• Inspect Wear Compensating Device (WCD): The WCD is designed to maintain consistent pressure over time. Regularly check its function to ensure proper engagement with the plunger rod.
• నిల్వ: Store the applicator in a clean, dry place, away from direct sunlight and extreme temperatures. Ensure the plunger rod is fully retracted before storage.
• నాజిల్ సంరక్షణ: Always remove and properly dispose of used mixing nozzles. Do not attempt to clean and reuse disposable nozzles.

6. ట్రబుల్షూటింగ్

7. స్పెసిఫికేషన్లు

8. వారంటీ మరియు మద్దతు

COX products are manufactured to high standards of quality and durability. For specific warranty information, please refer to the documentation included with your purchase or visit the official COX North America website. For technical support, spare parts, or service inquiries, please contact COX North America directly.

తయారీదారు: COX North America
Webసైట్: www.cox-applicators.com (This is a general placeholder link, please refer to official product documentation for exact support contact details.)