Allied Brass WP-90

Allied Brass WP-90 Frameless Round Tilt Beveled Edge Wall Mirror User Manual

మోడల్: WP-90

పరిచయం

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Allied Brass WP-90 Frameless Round Tilt Beveled Edge Wall Mirror. Please read this manual thoroughly before installation and retain it for future reference.

The Allied Brass WP-90 mirror is designed with state-of-the-art simplicity, featuring a frameless 22-inch diameter round mirror with a beveled edge and a durable satin brass finish. Its tilt mechanism allows for optimal viewing angles for users of all heights.

భద్రతా సమాచారం

  • Always handle glass components with care to prevent breakage and injury.
  • Ensure the mounting surface is structurally sound and capable of supporting the mirror's weight (approximately 13.6 pounds).
  • ఇన్‌స్టాలేషన్ సమయంలో తగిన సాధనాలు మరియు భద్రతా సామగ్రిని ఉపయోగించండి.
  • ఉక్కిరిబిక్కిరి అయ్యే ప్రమాదాలను నివారించడానికి చిన్న భాగాలు మరియు హార్డ్‌వేర్‌లను పిల్లలకు దూరంగా ఉంచండి.
  • ఏదైనా ఇన్‌స్టాలేషన్ దశ గురించి మీకు ఖచ్చితంగా తెలియకపోతే, అర్హత కలిగిన ప్రొఫెషనల్‌ని సంప్రదించండి.

ప్యాకేజీ విషయాలు

ఇన్‌స్టాలేషన్ ప్రారంభించే ముందు అన్ని భాగాలు ఉన్నాయని నిర్ధారించుకోండి:

  • 1 x Allied Brass WP-90 Frameless Round Tilt Beveled Edge Wall Mirror
  • మౌంటు హార్డ్‌వేర్ (స్క్రూలు, యాంకర్లు మొదలైనవి)

సెటప్ మరియు ఇన్‌స్టాలేషన్

The Allied Brass WP-90 mirror features concealed screw mounting hardware for a clean, seamless appearance. Follow these steps for proper installation:

  1. స్థానాన్ని ఎంచుకోండి: Select a suitable wall location that can support the mirror's weight and provides adequate space for tilting.
  2. మౌంటు పాయింట్లను గుర్తించండి: Hold the mirror assembly against the wall at the desired height and use a pencil to mark the positions for the mounting brackets. Ensure the marks are level.
  3. గోడ సిద్ధం: Depending on your wall type (drywall, stud, tile), drill pilot holes at the marked locations. Insert wall anchors if necessary.
  4. మౌంటు బ్రాకెట్లను అటాచ్ చేయండి: Secure the mounting brackets to the wall using the provided screws. Ensure they are firmly attached and level.
  5. Mount Mirror: Carefully align the mirror's mounting points with the brackets and secure the mirror in place. The concealed screw design will hide the hardware.
  6. స్థిరత్వాన్ని ధృవీకరించండి: Gently test the mirror's stability to ensure it is securely mounted and does not wobble.
Allied Brass WP-90 Frameless Round Tilt Beveled Edge Wall Mirror, front view

మూర్తి 1: ముందు view of the Allied Brass WP-90 Frameless Round Tilt Beveled Edge Wall Mirror. This image shows the round mirror with its beveled edge and the two satin brass mounting points on either side, indicating its wall-mounted design.

ఆపరేటింగ్ సూచనలు

The WP-90 mirror features a tilt mechanism that allows you to adjust the mirror's angle for optimal viewing. To adjust the tilt:

  • Gently grasp the top or bottom edge of the mirror.
  • Carefully push or pull the mirror to tilt it upwards or downwards. The pivot points on the mounting hardware allow for smooth adjustment.
  • Adjust until the desired angle is achieved. The mirror will hold its position once released.

నిర్వహణ మరియు సంరక్షణ

To ensure the longevity and appearance of your Allied Brass WP-90 mirror, follow these maintenance guidelines:

  • అద్దం శుభ్రపరచడం: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to avoid streaks and protect the brass finish. Wipe gently until clean and dry.
  • Cleaning the Brass Finish: For the satin brass components, use a soft, dry cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
  • సాధారణ తనిఖీ: Periodically check the mounting hardware to ensure it remains secure. Tighten any loose screws if necessary.
  • ప్రభావాన్ని నివారించండి: Protect the mirror from direct impact or heavy objects, which could cause chipping or breakage.

ట్రబుల్షూటింగ్

సమస్యసాధ్యమైన కారణంపరిష్కారం
Mirror wobbles after installation.Mounting hardware not fully tightened or wall anchors not secure.Ensure all screws are tightened. If using wall anchors, verify they are properly seated. Re-install if necessary.
Mirror does not tilt smoothly.Dust or debris in the pivot mechanism.Gently clean around the pivot points with a soft, dry cloth. Do not apply lubricants.
Streaks on mirror after cleaning.Too much cleaner used or dirty cloth.Use less cleaner, apply to cloth first, and use a clean, lint-free cloth.

స్పెసిఫికేషన్లు

ఫీచర్వివరాలు
బ్రాండ్Allied Brass
మోడల్ సంఖ్యWP-90
ఉత్పత్తి కొలతలు22"లీటర్లు x 22"వాట్
ఆకారంRound Tilt
ఫ్రేమ్ మెటీరియల్Beveled (Frameless)
మౌంటు రకంవాల్ మౌంట్
ముగింపు రకంశాటిన్ ఇత్తడి
మెటీరియల్మెటల్
వస్తువు బరువు13.6 పౌండ్లు
అసెంబ్లీ అవసరంనం
చేర్చబడిన భాగాలుWall Mirror and any required hardware
UPC013895676397

వారంటీ సమాచారం

The Allied Brass WP-90 Frameless Round Tilt Beveled Edge Wall Mirror is provided with a జీవితకాల పరిమిత వారంటీ against manufacturer's defects. This warranty covers defects in materials and workmanship under normal use and service.

For detailed warranty terms and conditions, please refer to the official Allied Brass warranty documentation or contact customer support.

కస్టమర్ మద్దతు

If you have any questions, require assistance with installation, or need to report a defect, please contact Allied Brass customer support. For the most up-to-date contact information, please visit the official Allied Brass website or refer to the packaging.

మీరు కూడా సందర్శించవచ్చు Allied Brass Store on Amazon మరిన్ని ఉత్పత్తి సమాచారం మరియు మద్దతు వనరుల కోసం.

© 2025 Allied Brass. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.