Targus TGT-BK58T

Targus TGT-BK58T 58-Inch 3-Way Panhead Tripod Instruction Manual

Model: TGT-BK58T

పరిచయం

This manual provides instructions for the proper setup, operation, and maintenance of your Targus TGT-BK58T 58-Inch 3-Way Panhead Tripod. Please read this manual thoroughly before using the product to ensure safe and efficient operation.

The Targus TGT-BK58T tripod is designed to provide stable support for cameras and camcorders, featuring a 3-way fluid panhead, quick-release plate, and quick-release leg locks for ease of use. It extends to a maximum height of 58 inches and folds to 23 inches for portability.

ప్యాకేజీ విషయాలు

  • Targus TGT-BK58T 58-Inch 3-Way Panhead Tripod
  • Quick-Release Plate (pre-attached or separate)
  • క్యారీయింగ్ కేసు

సెటప్

1. త్రిపాదను విప్పడం

  1. Remove the tripod from its carrying case.
  2. Gently spread the tripod legs outwards until they are fully extended or at your desired angle.
  3. To extend the legs, open the quick-release leg locks on each section. Pull the leg sections to the desired height and then close the quick-release leg locks firmly to secure them.

2. మీ కెమెరా/క్యామ్‌కార్డర్‌ను అటాచ్ చేయడం

The tripod features a quick-release plate for easy attachment and detachment of your device.

  1. Locate the quick-release plate on the panhead. If it's attached, release the locking mechanism (usually a lever or knob) and slide the plate off.
  2. Screw the quick-release plate onto the tripod mounting thread on the bottom of your camera or camcorder. Ensure it is securely tightened.
  3. Slide the camera with the attached quick-release plate back into the panhead receiver until it clicks or locks into place. Secure the locking mechanism.
Targus TGT-BK58T Tripod with camera attached

Image: Targus TGT-BK58T 58-Inch 3-Way Panhead Tripod. This image shows the tripod fully extended with a camera mounted on the panhead, illustrating its typical use.

ఆపరేటింగ్ సూచనలు

1. Adjusting Height and Stability

  • కాలు పొడిగింపు: Use the quick-release leg locks to adjust the height of each leg section independently. Ensure all locks are securely fastened before use.
  • మధ్య నిలువు వరుస: The center column can be raised or lowered for additional height adjustment. Loosen the center column lock knob, adjust the column, and then tighten the knob firmly.
  • బబుల్ స్థాయి: Utilize the integrated bubble level on the panhead to ensure your tripod is perfectly level for straight horizons and stable shots. Adjust leg lengths as needed to achieve level.

2. Using the 3-Way Panhead

The 3-way fluid panhead allows for precise adjustments in three directions: pan (horizontal), tilt (vertical), and portrait/landscape orientation.

  • పాన్ సర్దుబాటు: Loosen the pan lock knob (usually at the base of the panhead) to rotate the camera horizontally. Tighten to secure.
  • వంపు సర్దుబాటు: Loosen the tilt lock knob (often on the side of the panhead) to adjust the camera's vertical angle. Tighten to secure.
  • పోర్ట్రెయిట్/ల్యాండ్‌స్కేప్ సర్దుబాటు: A separate knob or lever allows for tilting the camera 90 degrees for portrait orientation. Loosen, adjust, and tighten.
  • పాన్ హ్యాండిల్: Use the pan handle for smooth and controlled movements during video recording or precise framing.

నిర్వహణ

  • శుభ్రపరచడం: ప్రతి ఉపయోగం తర్వాత దుమ్ము మరియు ధూళిని తొలగించడానికి ట్రైపాడ్‌ను మృదువైన, పొడి వస్త్రంతో తుడవండి. మొండి పట్టుదలగల ధూళి కోసం, కొద్దిగా d ఉపయోగించండి.amp బట్టతో తుడిచి, ఆరబెట్టండి. కఠినమైన రసాయనాలను నివారించండి.
  • నిల్వ: Store the tripod in its carrying case in a cool, dry place away from direct sunlight and extreme temperatures.
  • సరళత: Moving parts, such as leg locks and panhead mechanisms, generally do not require lubrication. If movement becomes stiff, consult a professional or the manufacturer's support.
  • తనిఖీ: Periodically check all screws, knobs, and leg locks to ensure they are tight and functioning correctly. Do not overtighten.

ట్రబుల్షూటింగ్

సమస్యసాధ్యమైన కారణంపరిష్కారం
త్రిపాద అస్థిరంగా ఉంటుంది.Leg locks not fully secured; uneven surface; weight limit exceeded.Ensure all leg locks are firmly closed. Adjust leg lengths to level the tripod using the bubble level. Verify camera/camcorder weight does not exceed 5 pounds.
కెమెరా సురక్షితంగా జోడించబడలేదు.Quick-release plate not tightened to camera; quick-release plate not locked into panhead.Ensure the quick-release plate is tightly screwed onto your device. Confirm the quick-release plate is fully inserted and locked into the panhead mechanism.
Panhead movement is stiff or loose.Locking knobs are too tight or too loose; dirt in mechanism.Adjust the pan and tilt locking knobs to the desired tension. Clean the panhead area. If issues persist, contact support.

స్పెసిఫికేషన్లు

మోడల్ సంఖ్యTGT-BK58T
బ్రాండ్టార్గస్
గరిష్ట ఎత్తు58 అంగుళాలు (147.3 సెం.మీ.)
మడతపెట్టిన ఎత్తు23 అంగుళాలు (58.4 సెం.మీ.)
వస్తువు బరువు2.5 పౌండ్లు (1.13 కిలోలు)
బరువు పరిమితి5 పౌండ్లు (2.27 కిలోలు)
తల రకం3-Way Fluid Panhead
మెటీరియల్అల్యూమినియం
అనుకూల పరికరాలుక్యామ్‌కార్డర్, కెమెరా
ప్రత్యేక లక్షణాలుAdjustable, Quick-Release Plate, Quick-Release Leg Locks, Dual Bubble Level

వారంటీ మరియు మద్దతు

For warranty information or technical support, please refer to the warranty card included with your product or visit the official Targus webవారంటీ క్లెయిమ్‌ల కోసం కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదును ఉంచండి.

గమనిక: వారంటీ నిబంధనలు మరియు షరతులు ప్రాంతాన్ని బట్టి మారవచ్చు.

© 2023 Targus. All rights reserved.

ఈ మాన్యువల్ నోటీసు లేకుండా మార్పుకు లోబడి ఉంటుంది.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.