Caleffi 870 Connecting Piece User Manual

ఉత్పత్తి ముగిసిందిview

The Caleffi 870 Connecting Piece is a brass sleeve designed for joining PE plastic pipes. It facilitates a secure connection, accommodating a maximum distance of 50 mm between pipe ends. This component is engineered for specific operational parameters to ensure reliable performance in plumbing systems.

మూర్తి 1: The Caleffi 870 Connecting Piece, a brass sleeve with hexagonal nuts on both ends, designed for joining pipes.

సాంకేతిక లక్షణాలు

ఇన్‌స్టాలేషన్ (సెటప్)

Proper installation is crucial for the long-term performance and leak-free operation of the Caleffi 870 connecting piece. Follow these steps carefully:

1. తయారీ: Ensure that the ends of the PE plastic pipes to be joined are clean, free from burrs, and cut squarely.
2. వేరుచేయడం: Unscrew the nuts from both ends of the Caleffi 870 connecting piece. Remove the compression rings and any other internal components if present, keeping them in order.
3. Pipe Insertion: Slide one nut, followed by a compression ring (if applicable), onto each pipe end.
4. కనెక్షన్: Insert the pipe ends into the body of the Caleffi 870 connecting piece. Ensure that the pipes are fully seated and that the maximum distance between the pipe ends does not exceed 50 mm within the fitting.
5. బిగించడం: Hand-tighten the nuts onto the connecting piece. Then, using an appropriate wrench, tighten the nuts further until a secure, leak-proof connection is achieved. Avoid over-tightening, which can damage the pipe or the fitting.
6. ధృవీకరణ: After installation, visually inspect the connection for proper alignment.

గమనిక: Always consult local plumbing codes and regulations before beginning any installation work. Professional installation is recommended for complex systems.

ఆపరేషన్

The Caleffi 870 connecting piece is a passive component designed to create a permanent, sealed connection between two PE plastic pipes. Once correctly installed, it operates by maintaining the integrity of the fluid pathway under specified pressure and temperature conditions.

• ఒత్తిడి పరిమితులు: Do not exceed the maximum operating pressure of 16 bar. Exceeding this limit can lead to leaks or component failure.
• ఉష్ణోగ్రత పరిమితులు: Do not expose the fitting to temperatures above 40 °C. High temperatures can compromise the material integrity and sealing capabilities.
• ద్రవ అనుకూలత: Ensure that the fluid passing through the pipes is compatible with brass and PE plastic materials.

No active user operation is required after installation, as the fitting functions as a static connection point.

నిర్వహణ

The Caleffi 870 connecting piece is designed for minimal maintenance once installed correctly. However, periodic inspection is recommended to ensure continued performance.

• దృశ్య తనిఖీ: Periodically check the connection points for any signs of leaks, corrosion, or physical damage.
• పర్యావరణ కారకాలు: Ensure the fitting is not exposed to harsh chemicals or extreme environmental conditions outside its specified operating limits.
• శుభ్రపరచడం: If necessary, gently clean the exterior of the fitting with a soft cloth and mild detergent. Avoid abrasive cleaners or solvents.

If any issues are detected, it is recommended to consult a qualified plumber for assessment and repair.

ట్రబుల్షూటింగ్

While the Caleffi 870 connecting piece is a robust component, issues can arise, often due to improper installation or external factors. Here are common issues and their potential solutions:

For persistent issues or problems not listed, contact a qualified plumbing professional.

వారంటీ సమాచారం

Specific warranty terms for the Caleffi 870 Connecting Piece are provided by the manufacturer, Caleffi. Please refer to the documentation included with your purchase or visit the official Caleffi website for detailed warranty policies. Generally, warranties cover defects in materials and workmanship under normal use and service conditions.

గమనిక: Damage resulting from improper installation, misuse, or exceeding specified operating limits may void the warranty.

మద్దతు మరియు సంప్రదించండి

For technical assistance, product inquiries, or support regarding the Caleffi 870 Connecting Piece, please contact Caleffi customer service or your local distributor.

Caleffi Official Webసైట్: www.caleffi.com

Please have your product model number (870) and any relevant purchase information ready when contacting support.