Sanitas SFT 01 Medical Thermometer User Manual

పరిచయం

The Sanitas SFT 01 Medical Thermometer is designed for accurate measurement of body temperature. This device features a large 3-digit display, is 100% waterproof, and can be disinfected for hygienic use. It is glass-free and mercury-free, ensuring safety. An audible signal indicates the completion of a measurement, and the device automatically stores the last reading. It also includes an automatic shut-off function and a battery change indicator.

సెటప్

1. బ్యాటరీ ఇన్‌స్టాలేషన్

The Sanitas SFT 01 thermometer comes with a product-specific battery already installed. If the battery indicator appears on the display, the battery needs to be replaced. To replace the battery:

1. బ్యాటరీ కంపార్ట్‌మెంట్ కవర్‌ను జాగ్రత్తగా తొలగించండి.
2. Insert a new battery of the specified type, ensuring correct polarity.
3. బ్యాటరీ కంపార్ట్‌మెంట్ కవర్‌ను సురక్షితంగా మార్చండి.

2. ప్రారంభ పవర్ ఆన్

Press the power button to turn on the thermometer. A brief self-test will occur, and the last measured temperature will be displayed. The device is ready for use when 'Lo' appears on the display, indicating it is ready to measure a new temperature.

Image: The Sanitas SFT 01 Medical Thermometer, showing its overall design with the display and power button.

ఆపరేటింగ్ సూచనలు

1. కొలత తీసుకోవడం

Ensure the thermometer is clean before use. Press the power button to turn it on. Place the thermometer tip in the desired measurement location (oral, axillary, or rectal). Hold it steady until the audible signal sounds, indicating the measurement is complete.

Image: Close-up of the thermometer's flexible tip, designed for comfortable and safe use.

2. డిస్ప్లేను చదవడం

The measured temperature will be shown on the large 3-digit LCD display. The device automatically saves the last measurement for reference.

Image: A close-up of the thermometer's digital display, clearly showing a temperature reading of 37.0 degrees Celsius.

3. ఆటోమేటిక్ షట్-ఆఫ్

To conserve battery life, the thermometer will automatically turn off after approximately 10 minutes of inactivity.

నిర్వహణ మరియు శుభ్రపరచడం

The Sanitas SFT 01 thermometer is 100% waterproof and disinfectable, making it easy to clean and maintain hygiene.

శుభ్రపరిచే సూచనలు:

1. After each use, clean the thermometer tip with a soft cloth and a disinfectant solution (e.g., 70% isopropyl alcohol).
2. ప్రకటనతో పరికరం మొత్తాన్ని తుడిచివేయండిamp cloth. Do not immerse the entire device in water for extended periods, although it is waterproof.
3. Store the thermometer in its protective storage case in a cool, dry place, away from direct sunlight and extreme temperatures.

ట్రబుల్షూటింగ్

• డిస్ప్లే లేదు / పరికరం ఆన్ కావడం లేదు: Check if the battery is correctly installed. If the battery change indicator was shown, replace the battery.
• 'Lo' or 'Hi' Displayed Continuously: 'Lo' indicates a temperature below the measurable range, and 'Hi' indicates a temperature above the measurable range. Ensure proper placement of the thermometer for measurement.
• సరికాని రీడింగ్‌లు: Ensure the thermometer tip is in full contact with the measurement area. Avoid taking measurements immediately after eating, drinking, or exercising. Allow sufficient time for the measurement to complete (until the audible signal).
• బ్యాటరీ మార్పు సూచిక: If the battery symbol appears on the display, replace the battery as described in the Setup section.

సాంకేతిక లక్షణాలు

వారంటీ సమాచారం

Please refer to the warranty card included with your product for specific warranty terms and conditions. General warranty information may also be available on the official Sanitas webసైట్.

కస్టమర్ మద్దతు

For further assistance, technical support, or inquiries regarding your Sanitas SFT 01 Medical Thermometer, please visit the official Sanitas website or contact their customer service department. Contact details can typically be found in the packaging or on the manufacturer's webసైట్.