ముఖ్యమైన భద్రతా సూచనలు
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause property damage.
- హెచ్చరిక: విద్యుత్ షాక్ ప్రమాదం. ఇన్స్టాలేషన్ లేదా సర్వీసింగ్ చేసే ముందు ఫ్యూజ్ బాక్స్ లేదా సర్క్యూట్ బ్రేకర్ వద్ద పవర్ డిస్కనెక్ట్ చేయండి.
- అన్ని విద్యుత్ కనెక్షన్లు స్థానిక కోడ్లు, ఆర్డినెన్స్లు లేదా నేషనల్ ఎలక్ట్రిక్ కోడ్ (NEC)కి అనుగుణంగా ఉండాలి. మీకు సరైన విద్యుత్ వైరింగ్ కనెక్షన్లు తెలియకపోతే అర్హత కలిగిన ఎలక్ట్రీషియన్ను సంప్రదించండి.
- This fixture is designed for indoor, dry location use only. Do not install in wet or damp ప్రాంతాలు.
- మౌంటు ఉపరితలం ఫిక్చర్ బరువుకు మద్దతు ఇవ్వగలదని నిర్ధారించుకోండి.
- ప్రతిపాదన 65 హెచ్చరిక: ఈ ఉత్పత్తిలో క్యాన్సర్ మరియు జనన లోపాలు లేదా ఇతర పునరుత్పత్తి హాని కలిగించే కాలిఫోర్నియా రాష్ట్రానికి తెలిసిన రసాయనాలు ఉండవచ్చు.
ఉత్పత్తి ముగిసిందిview
The EGLO Tarbes 3-Light Pendant is an adjustable lighting fixture designed for indoor use, suitable for kitchen islands, hallways, and dining rooms. It features three individual pendant lights with geometric metal shades, suspended from a linear canopy. The fixture is finished in matte black, offering a contemporary aesthetic.

Image: EGLO Tarbes 3-Light Pendant Fixture. This image shows the complete pendant light fixture with three individual lights, each featuring a geometric metal shade, suspended from a linear bar in matte black finish.
ప్యాకేజీ విషయాలు
Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer support for assistance.
- Light Fixture Assembly (Canopy, Suspension Rods, 3 Pendant Shades with Sockets)
- Mounting Hardware (Crossbar, Mounting Screws, Wire Nuts)
- ఇన్స్ట్రక్షన్ మాన్యువల్
గమనిక: లైట్ బల్బులు చేర్చబడలేదు మరియు విడిగా కొనుగోలు చేయాలి.
స్పెసిఫికేషన్లు
| ఫీచర్ | వివరాలు |
|---|---|
| బ్రాండ్ | EGLO |
| మోడల్ సంఖ్య | 94189A |
| రంగు | మాట్ బ్లాక్ |
| మెటీరియల్ | మెటల్ (ఫిక్స్చర్), గ్లాస్ (షేడ్) |
| శైలి | Contemporary / Transitional |
| లైట్ ఫిక్చర్ ఫారం | లాకెట్టు |
| ఇండోర్/అవుట్డోర్ వినియోగం | ఇండోర్ |
| శక్తి మూలం | కార్డెడ్ ఎలక్ట్రిక్ |
| కాంతి మూలం | Incandescent (E26 base recommended) |
| కాంతి వనరుల సంఖ్య | 3 |
| వాల్యూమ్tage | 120 వోల్ట్లు |
| వాట్tage (బల్బుకు గరిష్టంగా) | 100 వాట్స్ |
| మౌంటు రకం | పొడుచుకు వచ్చిన |
| అవసరమైన అసెంబ్లీ | అవును |
| సర్టిఫికేషన్ | UL జాబితా చేయబడింది |
| అంశం కొలతలు (L x W x H) | 31.06" x 6.3" x 10.5" (Fixture body) |
| సర్దుబాటు ఎత్తు | Up to 72 inches (total height) |
| వస్తువు బరువు | 4.43 పౌండ్లు |

Image: EGLO Tarbes 3-Light Pendant with dimensions. This diagram illustrates the overall dimensions of the fixture, including the 31.06-inch length of the bar, 6.3-inch width of the shades, and an adjustable maximum hanging height of 72 inches. It also indicates "Indoor" use and "3 x 100W E26" bulb requirements.
ఇన్స్టాలేషన్ గైడ్
అవసరమైన సాధనాలు (చేర్చబడలేదు):
- ఫిలిప్స్ హెడ్ స్క్రూడ్రైవర్
- ఫ్లాట్ హెడ్ స్క్రూడ్రైవర్
- వైర్ స్ట్రిప్పర్స్
- ఎలక్ట్రికల్ టేప్
- నిచ్చెన
- భద్రతా అద్దాలు
దశల వారీ సంస్థాపన:
- పవర్ ఆఫ్ చేయండి: Before starting, ensure the power to the circuit at the circuit breaker or fuse box is completely OFF. This is a critical safety step.
- మౌంటు ఉపరితలాన్ని సిద్ధం చేయండి: ఇప్పటికే ఉన్న ఫిక్చర్ను భర్తీ చేస్తుంటే, దానిని జాగ్రత్తగా తీసివేయండి. జంక్షన్ బాక్స్ సురక్షితంగా అమర్చబడిందని మరియు ఫిక్చర్ బరువును తట్టుకోగలదని నిర్ధారించుకోండి.
- మౌంటింగ్ క్రాస్బార్ను ఇన్స్టాల్ చేయండి: Attach the mounting crossbar to the junction box using the provided mounting screws. Ensure it is firmly secured.
- లాకెట్టు ఎత్తును సర్దుబాటు చేయండి: The length of each pendant cord can be adjusted. Determine the desired hanging height for each light. Loosen the set screw on the canopy where the cord enters, adjust the cord to the desired length, and then tighten the set screw to secure it. Repeat for all three pendants.
- విద్యుత్ కనెక్షన్లు చేయండి:
- కనెక్ట్ చేయండి నలుపు ఫిక్చర్ నుండి వైర్ వరకు నలుపు (Live) wire from the junction box using a wire nut.
- కనెక్ట్ చేయండి తెలుపు ఫిక్చర్ నుండి వైర్ వరకు తెలుపు (Neutral) wire from the junction box using a wire nut.
- కనెక్ట్ చేయండి నేల ఫిక్చర్ నుండి వైర్ (బేర్ కాపర్ లేదా ఆకుపచ్చ) నేల wire from the junction box and to the mounting crossbar's ground screw.
- Ensure all wire nuts are securely tightened and connections are covered with electrical tape if necessary.
- Mount Fixture Canopy: Carefully tuck all wires into the junction box. Align the fixture canopy with the mounting screws on the crossbar and secure it in place using the provided cap nuts or screws.
- లైట్ బల్బులను అమర్చండి: Screw in three (3) incandescent bulbs with an E26 base, not exceeding 100 watts each.
- శక్తిని పునరుద్ధరించండి: ఇన్స్టాలేషన్ పూర్తయిన తర్వాత మరియు అన్ని కనెక్షన్లు సురక్షితంగా ఉన్న తర్వాత, సర్క్యూట్ బ్రేకర్ లేదా ఫ్యూజ్ బాక్స్ వద్ద పవర్ను పునరుద్ధరించండి. ఫిక్చర్ను పరీక్షించండి.

Image: EGLO Tarbes 3-Light Pendant installed over a kitchen island. This image demonstrates the fixture's appearance in a typical home environment, highlighting its use over a kitchen island.
ఆపరేటింగ్ సూచనలు
This pendant light fixture operates with standard wall switches. Ensure appropriate E26 base incandescent bulbs (max 100W per bulb) are installed. The fixture is designed for use with 120V electrical systems.
- పవర్ ఆన్/ఆఫ్: లైట్లను ఆన్ లేదా ఆఫ్ చేయడానికి ఫిక్చర్కి కనెక్ట్ చేయబడిన వాల్ స్విచ్ని ఉపయోగించండి.
- బల్బ్ రకం: Use E26 base bulbs. Incandescent bulbs up to 100 watts per socket are supported. For energy efficiency, LED or CFL bulbs with an E26 base can also be used, provided their wattage equivalent does not exceed 100W and they are compatible with the fixture's electrical system.
నిర్వహణ
శుభ్రపరచడం:
- శుభ్రపరిచే ముందు ఎల్లప్పుడూ పవర్ డిస్కనెక్ట్ చేయండి.
- మృదువైన, పొడి వస్త్రంతో ఫిక్చర్ను తుడవండి.
- కఠినమైన రసాయనాలు, రాపిడి క్లీనర్లు లేదా పాలిష్లను ఉపయోగించవద్దు ఎందుకంటే అవి ముగింపును దెబ్బతీస్తాయి.
బల్బ్ భర్తీ:
- Ensure the power is OFF and the bulbs have cooled completely before attempting to replace them.
- పాత బల్బును సాకెట్ నుండి జాగ్రత్తగా విప్పండి.
- కొత్త E26 బేస్ బల్బును స్క్రూ చేయండి, అది 100 వాట్లకు మించకుండా చూసుకోండి.
- శక్తిని పునరుద్ధరించండి మరియు కొత్త బల్బును పరీక్షించండి.
ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| లైట్ ఆన్ చేయదు. |
|
|
| కాంతి మినుకుమినుకుమంటుంది. |
|
|
వారంటీ సమాచారం
EGLO products are covered by a 1 సంవత్సరాల వారంటీ from the date of original shipment when purchased on Amazon. This warranty covers items and conditions identified in the original manufacturer's warranty. Additionally, a 30-రోజుల విడిభాగాల భర్తీ విధానం is in place to ensure a fully working item.
మినహాయింపులు: The warranty specifically does not cover loss and theft, water damage, customer abuse, and finish deterioration due to UV or coastal exposure.
కస్టమర్ మద్దతు
For further assistance, missing parts, or warranty claims, please contact EGLO customer support.
You can visit the official EGLO store on Amazon for more information and contact options: EGLO Amazon Store