Fluance RT81 Elite High Fidelity Vinyl Turntable Record Player User Manual

పరిచయం

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Fluance RT81 Elite High Fidelity Vinyl Turntable. Please read this manual thoroughly before using your turntable to ensure proper function and longevity.

The Fluance RT81 is designed to deliver a pure analog listening experience with premium components, including an Audio Technica AT95E cartridge, a belt-drive system, and a high-mass MDF wood plinth for superior vibration isolation.

ఏమి చేర్చబడింది

ప్యాకేజింగ్‌లో అన్ని భాగాలు ఉన్నాయని నిర్ధారించుకోండి:

• RT81 Turntable Unit
• డస్ట్ కవర్
• 45 అడాప్టర్
• రబ్బరు ప్లాటర్ మ్యాట్
• 3ft RCA Cable with Ground Wire
• 100V - 240V (50/60Hz) AC Power Adapter
• త్వరిత ప్రారంభ గైడ్
• Audio Technica AT95E Cartridge (pre-installed on headshell)
• కౌంటర్ వెయిట్
• Hinges (x2)
• రబ్బరు బెల్ట్

Image: All components included with the Fluance RT81 turntable, including the plinth, aluminum platter, platter mat, headshell & AT95E cartridge, dust cover, hinges, RCA cable, 45 adapter, counterweight, 5ft power adapter, and rubber belt.

సెటప్

1. అన్‌ప్యాకింగ్ మరియు ప్లేస్‌మెంట్

Carefully remove all components from the packaging. Place the turntable on a stable, level surface away from direct sunlight, heat sources, and excessive vibration.

Image: The Fluance RT81 turntable in its walnut finish, with the clear dust cover open, showcasing ది ప్లాటర్ మరియు టోనెర్మ్.

2. ప్లాటర్ మరియు బెల్ట్ ఇన్‌స్టాలేషన్

1. Place the aluminum platter onto the spindle.
2. Carefully loop the rubber belt around the motor pulley and the inner rim of the platter. Ensure the belt is not twisted.
3. Place the rubber platter mat on top of the aluminum platter.

చిత్రం: క్లోజప్ view of the Fluance RT81 turntable's tonearm, highlighting the Audio Technica AT95E cartridge with its green stylus.

3. టోన్ ఆర్మ్ సెటప్

The Audio Technica AT95E cartridge is pre-installed on the headshell. You will need to balance the tonearm and set the tracking force.

1. టోనర్మ్ వెనుక భాగంలో కౌంటర్ వెయిట్‌ను అటాచ్ చేయండి.
2. Adjust the counterweight until the tonearm is balanced and floats horizontally.
3. Set the tracking force to the recommended 2.0 grams by rotating the counterweight.
4. Set the anti-skating control to '2' to match the tracking force.

4. ఆడియో సిస్టమ్‌కు కనెక్ట్ చేయడం

The RT81 features a built-in Texas Instruments preamp, offering flexibility in connection options.

• Using Built-in Preamp: Set the PHONO/LINE switch on the back of the turntable to లైన్. Connect the RCA cables from the turntable's AUDIO OUTPUT to any available line-level input (e.g., AUX, CD) on your amplifier or powered speakers. The ground wire is not needed in this configuration.
• Using External Preamp: Set the PHONO/LINE switch on the back of the turntable to ఫోన్. Connect the RCA cables from the turntable's AUDIO OUTPUT to the PHONO input on your external preamp or receiver. Connect the ground wire from the turntable's ground post to the ground terminal on your external preamp/ రిసీవర్.

Image: Rear panel of the Fluance RT81 turntable, displaying the RCA audio output jacks, ground terminal, PHONO/LINE switch, AUTO STOP switch, and DC 12V power input.

5. పవర్ కనెక్షన్

Connect the AC power adapter to the DC 12V input on the back of the turntable, then plug it into a wall outlet.

ఆపరేటింగ్ సూచనలు

1. రికార్డ్ ప్లే చేయడం

1. Place a record on the platter mat. For 7-inch singles, use the included 45 adapter.
2. Select the appropriate speed (33 or 45 RPM) using the selector dial on the front left.
3. క్యూయింగ్ లివర్ ఉపయోగించి టోన్ ఆర్మ్‌ను ఎత్తండి.
4. Manually position the tonearm over the desired starting groove of the record.
5. Lower the tonearm slowly using the cueing lever. The record will begin to play.

2. Auto Stop Function

The RT81 features an auto-stop function. When enabled (AUTO STOP switch set to ON), the platter will automatically stop spinning once the tonearm reaches the end of the record. If disabled (AUTO STOP switch set to OFF), the platter will continue to spin until manually stopped.

3. ప్లేబ్యాక్‌ను ఆపడం

1. క్యూయింగ్ లివర్ ఉపయోగించి టోన్ ఆర్మ్‌ను ఎత్తండి.
2. Return the tonearm to its rest.
3. Turn the speed selector dial to "OFF" to stop the platter.

నిర్వహణ

1. టర్న్ టేబుల్ శుభ్రం చేయడం

Regular cleaning will help maintain the performance and appearance of your RT81.

• Use a soft, dry cloth to wipe the plinth and dust cover. Avoid abrasive cleaners.
• Gently brush the stylus with a soft brush in a back-to-front motion to remove dust.
• Clean records regularly with a carbon fiber brush or record cleaning solution to prevent dust buildup and improve sound quality.

2. బెల్ట్ భర్తీ

The drive belt may need replacement over time due to wear. Refer to the "What's Included" section for the location of the belt and instructions for re-installation.

ట్రబుల్షూటింగ్

స్పెసిఫికేషన్లు

• మోడల్: RT81 Elite
• బ్రాండ్: ఫ్లూయెన్స్
• కొలతలు (L x W x H): 13.75 x 16.5 x 5.5 అంగుళాలు
• వస్తువు బరువు: 14.1 పౌండ్లు
• Plinth Material: MDF వుడ్
• ప్లేటర్: అల్యూమినియం
• గుళిక: Audio Technica AT95E (Elliptical Stylus)
• డ్రైవ్ సిస్టమ్: బెల్ట్ డ్రైవ్
• వేగం: 33 1/3, 45 RPM
• ముందుగాamp: Built-in Texas Instruments Preamp (switchable PHONO/LINE)
• కనెక్టివిటీ: Wired RCA Output with Ground Terminal
• ఆటో స్టాప్: Yes (switchable ON/OFF)
• రంగు: వాల్నట్

చిత్రం: ఓవర్ హెడ్ view of the Fluance RT81 turntable with a record spinning, demonstrating its operational state.

వారంటీ & మద్దతు

Your Fluance RT81 turntable comes with a 2 సంవత్సరాల తయారీదారు వారంటీ. For warranty claims or technical support, please contact Fluance customer service directly.

జీవితకాల కస్టమర్ మద్దతు is also provided by Fluance to assist with any questions or issues you may encounter with your turntable.

For additional resources, including detailed setup videos and FAQs, please visit the official Fluance website or refer to the included Quick Start Guide.

Image: The Fluance company logo, "FLUANCE. Serious Performance."