పరిచయం
The BRITA Marella water filter jug is designed to provide great-tasting filtered water by reducing impurities from tap water. It features MAXTRA+ filter technology, which utilizes MicroFlow technology, Micro Carbon Pearls, and Ion Exchange Pearls to reduce chlorine, organic impurities, lead, copper, and limescale. This manual provides instructions for the proper setup, operation, and maintenance of your BRITA Marella jug.
Image: BRITA Marella Cool Colours Jug in Teal, showcasing its design and filter compartment.
సెటప్
- భాగాలను అన్ప్యాక్ చేయండి: Carefully remove all parts from the packaging. Ensure you have the jug, lid, and MAXTRA+ filter cartridge.
- Clean the Jug: Wash the jug (excluding the lid) in a dishwasher or by hand with warm, soapy water. Rinse thoroughly. The lid should be wiped clean with a damp గుడ్డ.
- Prepare the MAXTRA+ Filter:
- Remove the filter from its protective wrapper.
- Submerge the filter in cold water for approximately 15 minutes to remove any air bubbles.
- ఫిల్టర్ని చొప్పించండి: Place the prepared MAXTRA+ filter into the funnel of the jug. Press down firmly until it clicks into place.
- ప్రారంభ వడపోత: Fill the jug with tap water. Discard the first two filtered fillings. This primes the filter and ensures optimal performance.
ఆపరేటింగ్ సూచనలు
- కూజాను నింపడం: Open the flip-top lid and fill the jug with cold tap water. The water will pass through the MAXTRA+ filter into the main reservoir.
- ఫిల్టర్ మార్పు సూచిక: The electronic 'memo' reminder on the lid will indicate when it's time to replace the filter cartridge.
- To activate the indicator after inserting a new filter, press and hold the 'START' button until the display shows 100%.
- The indicator will gradually decrease over approximately one month, signaling the remaining filter life.
- నీరు పోయడం: Once the water has filtered through, you can pour it directly from the jug. The lid is designed to prevent unfiltered water from mixing with filtered water during pouring.
చిత్రం: క్లోజప్ view of the electronic 'memo' reminder on the BRITA Marella jug lid, showing the filter life indicator.
నిర్వహణ
- శుభ్రపరచడం: The BRITA Marella jug (excluding the lid) is dishwasher safe. For the lid, wipe it clean with a damp cloth. Do not immerse the lid in water or wash it in a dishwasher due to the electronic indicator.
- ఫిల్టర్ భర్తీ: Replace the MAXTRA+ filter cartridge approximately every four weeks (or when the electronic 'memo' indicator signals replacement) to ensure optimal filtration performance. Follow the filter preparation and insertion steps outlined in the "Setup" section.
ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| Slow water filtration | Air bubbles trapped in the filter, or filter is nearing end of life. | Ensure the filter was properly pre-soaked. If the filter is old, replace it. |
| Filter indicator not resetting | Button not held long enough, or battery issue. | Press and hold the 'START' button firmly for several seconds until the display resets to 100%. If it still doesn't work, contact BRITA support. |
| Unpleasant taste in filtered water | Filter not properly primed, or filter needs replacement. | Discard the first two fillings after a new filter installation. If the issue persists, replace the filter. |
స్పెసిఫికేషన్లు
- బ్రాండ్: బ్రిటా
- మోడల్ పేరు: మారెల్లా
- మోడల్ సంఖ్య: 4006387076733
- సామర్థ్యం: 2.4 Liters (Total), 1.4 Liters (Filtered Water)
- మెటీరియల్: ప్లాస్టిక్
- శుద్దీకరణ విధానం: Ion Exchange, Micro Carbon Pearls
- ప్రత్యేక ఫీచర్: Chlorine Reduction, Limescale Reduction, Lead & Copper Reduction
- ఫిల్టర్ రకం: MAXTRA+ (lasts approximately 1 month)
- డిష్వాషర్ సేఫ్: Yes (excluding lid)
వారంటీ మరియు మద్దతు
For detailed warranty information and customer support, please refer to the official BRITA webసైట్ లేదా వారి కస్టమర్ సర్వీస్ను నేరుగా సంప్రదించండి. ఏవైనా వారంటీ క్లెయిమ్ల కోసం మీ కొనుగోలు రుజువును ఉంచండి.
You can find more information and contact details on the official BRITA webసైట్: www.brita.com