టెక్‌టేక్ 400162

TecTake Professional Ice Maker User Manual

మోడల్: 400162

1. ముఖ్యమైన భద్రతా సూచనలు

ఉపకరణాన్ని ఆపరేట్ చేసే ముందు దయచేసి అన్ని సూచనలను జాగ్రత్తగా చదవండి మరియు భవిష్యత్తు సూచన కోసం వాటిని ఉంచండి. ఈ సూచనలను పాటించడంలో విఫలమైతే విద్యుత్ షాక్, అగ్ని ప్రమాదం లేదా తీవ్రమైన గాయం సంభవించవచ్చు.

  • విద్యుత్ భద్రత: విద్యుత్ సరఫరా వాల్యూమ్‌తో సరిపోలుతుందని నిర్ధారించుకోండిtage specified on the appliance. Do not operate with a damaged power cord or plug. Do not immerse the appliance, cord, or plug in water or other liquids.
  • ప్లేస్‌మెంట్: Place the ice maker on a stable, level surface away from direct sunlight, heat sources, and corrosive gases. Ensure adequate ventilation around the unit.
  • నీటి నాణ్యత: Use only potable water. Do not fill with carbonated beverages or other liquids.
  • పిల్లలు మరియు పెంపుడు జంతువులు: Keep the appliance out of reach of children and pets. Supervision is necessary when the appliance is used near children.
  • నిర్వహణ: Unplug the appliance before cleaning or performing any maintenance. Do not attempt to repair the appliance yourself; contact qualified service personnel.
  • వాడుక: This appliance is intended for household and similar applications only. Do not use outdoors.

2. ప్యాకేజీ విషయాలు

క్రింద జాబితా చేయబడిన అన్ని అంశాలు మీ ప్యాకేజీలో చేర్చబడ్డాయని ధృవీకరించండి. ఏవైనా అంశాలు తప్పిపోయినా లేదా దెబ్బతిన్నా, దయచేసి కస్టమర్ మద్దతును సంప్రదించండి.

  • TecTake Professional Ice Maker Unit
  • ఐస్ బకెట్
  • ఐస్ స్కూప్
  • వినియోగదారు మాన్యువల్ (ఈ పత్రం)
TecTake Professional Ice Maker with lid open, showing the ice basket and scoop inside.

Image: The TecTake Ice Maker with its lid open, revealing the removable ice bucket and the included ice scoop.

3. ఉత్పత్తి ముగిసిందిview

Familiarize yourself with the main components of your TecTake Professional Ice Maker.

ముందు view of the TecTake Professional Ice Maker.

చిత్రం: ముందు భాగం view of the TecTake Professional Ice Maker, showcasing its sleek silver design and control panel.

నియంత్రణ ప్యానెల్

The intuitive control panel provides status indicators and operation control.

  • ADD WATER Indicator (Red): నీటి రిజర్వాయర్ నింపాల్సిన అవసరం వచ్చినప్పుడు ప్రకాశిస్తుంది.
  • FULL ICE Indicator (Red): మంచు బుట్ట నిండినప్పుడు వెలుగుతుంది.
  • ON/OFF Button (Green LED): Press to turn the ice maker on or off. The green LED indicates power is on.
Close-up of the TecTake Ice Maker's control panel with indicator lights and power button.

చిత్రం: వివరణాత్మక view of the control panel, showing the 'ADD WATER' and 'FULL ICE' indicator lights, and the 'ON/OFF' button.

4. సెటప్

4.1 అన్‌ప్యాకింగ్

  1. ఐస్ మేకర్‌ను దాని ప్యాకేజింగ్ నుండి జాగ్రత్తగా తొలగించండి.
  2. Remove all packing materials, tapes, and labels.
  3. Inspect the appliance for any damage. Do not operate if damaged.

4.2 ప్లేస్‌మెంట్

  • ఐస్ మేకర్‌ను చదునైన, స్థిరమైన మరియు వేడి-నిరోధక ఉపరితలంపై ఉంచండి.
  • Ensure there is at least 10 cm (4 inches) of space around the unit for proper ventilation.
  • Avoid placing the unit near heat sources (e.g., ovens, radiators) or in direct sunlight, as this can affect ice production efficiency.

4.3 First Use & Initial Cleaning

  1. Before first use, clean the interior of the ice maker. Remove the ice basket and wash it with warm water and a mild detergent. Rinse thoroughly.
  2. లోపలి భాగాన్ని మృదువైన గుడ్డతో తుడవండి.
  3. MAX ఫిల్ లైన్ వరకు తాగునీటితో నీటి రిజర్వాయర్ నింపండి. అతిగా నింపవద్దు.
A hand pouring water into the TecTake Ice Maker's water reservoir.

Image: Illustrates the process of filling the water reservoir of the ice maker with a bottle of water.

  1. పవర్ కార్డ్‌ను గ్రౌన్దేడ్ ఎలక్ట్రికల్ అవుట్‌లెట్‌లోకి ప్లగ్ చేయండి.
  2. Press the ON/OFF button to start the ice maker.
  3. Allow the unit to run for 3-4 cycles, discarding the first few batches of ice to ensure cleanliness.
  4. Drain the water from the reservoir (refer to Maintenance section for draining instructions) and refill with fresh water before regular use.

5. ఆపరేటింగ్ సూచనలు

5.1 మంచు ఉత్పత్తిని ప్రారంభించడం

  1. నీటి రిజర్వాయర్ త్రాగునీటితో నిండి ఉందని నిర్ధారించుకోండి.
  2. Plug the ice maker into a suitable power outlet.
  3. Press the ON/OFF button. The green LED will illuminate, and the ice production cycle will begin.

5.2 మంచు ఉత్పత్తి చక్రం

The ice maker will automatically draw water from the reservoir into the ice-making tray. Ice cubes are formed on the freezing rods. Once formed, the ice cubes are released into the ice basket. Each cycle takes approximately 15 to 30 minutes, depending on ambient temperature and water temperature.

Close-up of clear ice cubes in the ice basket of the TecTake Ice Maker.

చిత్రం: క్లోజప్ view of freshly made clear ice cubes collected in the ice basket, ready for use.

5.3 కంట్రోల్ ప్యానెల్ సూచికలు

  • ఉంటే నీటిని జోడించండి indicator lights up red, the water level in the reservoir is too low. Refill the reservoir with water. The ice maker will automatically resume operation once water is added.
  • ఉంటే ఫుల్ ఐస్ indicator lights up red, the ice basket is full. Remove ice from the basket. The ice maker will automatically resume operation once space is cleared.

5.4 Harvesting Ice

Use the provided ice scoop to remove ice cubes from the basket. For best results, transfer unused ice to a freezer for long-term storage, as the ice maker is not a freezer and ice may melt over time.

6. నిర్వహణ

Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your ice maker.

6.1 రెగ్యులర్ క్లీనింగ్

  1. Unplug the ice maker from the power outlet before cleaning.
  2. మంచు బుట్టను తొలగించండి.
  3. Clean the interior liner, water reservoir, and ice basket with a soft cloth dampened with warm water and a mild, non-abrasive detergent.
  4. అన్ని ఉపరితలాలను శుభ్రమైన నీటితో బాగా కడగాలి.
  5. శుభ్రమైన, మృదువైన వస్త్రంతో పొడిగా తుడవండి.
  6. For stubborn stains, a solution of water and vinegar (1:1 ratio) can be used. Rinse thoroughly afterwards.

6.2 నీటిని పారబోయడం

To drain the water from the reservoir, locate the drain plug at the bottom of the unit. Place a container underneath and remove the plug to allow water to drain completely. Reinsert the plug firmly after draining.

Close-up of the drain plug located at the bottom of the TecTake Ice Maker.

Image: Shows the drain plug on the underside of the ice maker, indicating where to release water from the reservoir.

6.3 నిల్వ

If the ice maker will not be used for an extended period, drain all water, clean the unit thoroughly, and ensure it is completely dry before storing. Store in a cool, dry place.

7. ట్రబుల్షూటింగ్

కస్టమర్ సపోర్ట్‌ను సంప్రదించే ముందు, సాధారణ సమస్యలు మరియు వాటి పరిష్కారాల కోసం దయచేసి క్రింది పట్టికను చూడండి.

సమస్యసాధ్యమైన కారణంపరిష్కారం
ఐస్ మేకర్ ఆన్ అవ్వడం లేదు.విద్యుత్ సరఫరా లేదు.పవర్ కార్డ్ పనిచేసే అవుట్‌లెట్‌లోకి సురక్షితంగా ప్లగ్ చేయబడిందో లేదో తనిఖీ చేయండి. సర్క్యూట్ బ్రేకర్‌ను తనిఖీ చేయండి.
నీటి సూచికను జోడించండి ఆన్‌లో ఉంది.నీటి నిల్వ స్థలం ఖాళీగా ఉంది లేదా తక్కువగా ఉంది.MAX లైన్ వరకు నీటి రిజర్వాయర్‌ను త్రాగు నీటితో నింపండి.
FULL ICE indicator is on.మంచు బుట్ట నిండింది.బుట్ట నుండి మంచు తొలగించండి.
ఐస్ క్యూబ్స్ చిన్నవిగా లేదా మబ్బుగా ఉంటాయి.Water temperature is too high; ambient temperature is too high.Use colder water. Ensure the unit is in a cool, well-ventilated area.
మంచు ఉత్పత్తి నెమ్మదిగా ఉంది.High ambient temperature; poor ventilation.Ensure adequate space around the unit for ventilation. Avoid direct sunlight or heat sources.
యూనిట్ అసాధారణ శబ్దం చేస్తుంది.Normal operation sounds (compressor, water pump) or unit not level.Ensure the unit is on a stable, level surface. If noise is excessive or unusual, contact support.

8. స్పెసిఫికేషన్లు

Technical specifications for the TecTake Professional Ice Maker.

ఫీచర్స్పెసిఫికేషన్
బ్రాండ్టెక్‌టేక్
మోడల్ సంఖ్య400162
కొలతలు (L x W x H)37 x 29 x 35.5 సెం.మీ (14.57 x 11.42 x 13.98 అంగుళాలు)
నీటి ట్యాంక్ సామర్థ్యం2.2 లీటర్లు
మంచు ఉత్పత్తి సామర్థ్యంApprox. 13 kg per 24 hours
Ice Cubes per Cycle24
సైకిల్ సమయంసుమారు 15-30 నిమిషాలు
వాల్యూమ్tage240 వోల్ట్లు
శీతలకరణి600A
మెటీరియల్ప్లాస్టిక్
సర్టిఫికేషన్Intertek GS certified (Certificate No. 22SHH0265-01)
వెనుక view of the TecTake Ice Maker showing the specifications label and ventilation.

Image: The rear of the ice maker, displaying the product label with technical specifications and the cooling fan.

9. వారంటీ మరియు మద్దతు

TecTake products are manufactured with high-quality materials and undergo strict quality control. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship from the date of purchase. Please refer to your purchase documentation for specific warranty terms and duration.

For technical support, troubleshooting assistance, or warranty claims, please contact TecTake customer service. Have your model number (400162) and purchase receipt ready when contacting support.

ఆన్‌లైన్ మద్దతు: అధికారిక TecTake ని సందర్శించండి webతరచుగా అడిగే ప్రశ్నలు మరియు మద్దతు వనరుల కోసం సైట్.

సంప్రదింపు సమాచారం: Refer to the contact details provided with your purchase or on the official TecTake webసైట్.

© 2024 TecTake. అన్ని హక్కులు ప్రత్యేకించబడ్డాయి.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.