Kingston Brass KS2986AX Governor Widespread Bathroom Faucet User Manual

1. పరిచయం

This manual provides detailed instructions for the installation, operation, and maintenance of your Kingston Brass KS2986AX Governor Widespread Bathroom Faucet. Please read all instructions carefully before beginning installation to ensure proper function and longevity of your product. This faucet features solid brass construction, a drip-free ceramic disc cartridge, and is designed for a 3-hole widespread installation.

2. భద్రతా సమాచారం

Always turn off the main water supply before installing or performing any maintenance on the faucet. Wear appropriate personal protective equipment, such as safety glasses, during installation. If you are unsure about any part of the installation process, consult a qualified plumber. Do not overtighten connections, as this may damage the product or plumbing.

3 చేర్చబడిన భాగాలు

ఇన్‌స్టాలేషన్ ప్రారంభించే ముందు అన్ని భాగాలు ఉన్నాయని నిర్ధారించుకోండి.

• పీపాలో నుంచి నీళ్లు బయిటికి రావడమునకు వేసివుండే చిన్న గొట్టము అసెంబ్లీ
• Hot and Cold Handle Assemblies
• మౌంటు హార్డ్‌వేర్
• Brass Pop-Up Drain Assembly
• Water Supply Lines (typically included or purchased separately)

Image: All components of the Kingston Brass KS2986AX Governor Widespread Bathroom Faucet, including the spout, handles, and pop-up drain.

4. అవసరమైన సాధనాలు

సంస్థాపనకు సాధారణంగా ఈ క్రింది సాధనాలు అవసరం:

• సర్దుబాటు చేయగల రెంచ్
• ఫిలిప్స్ హెడ్ స్క్రూడ్రైవర్
• ప్లంబర్ పుట్టీ లేదా సిలికాన్ సీలెంట్
• థ్రెడ్ సీల్ టేప్ (టెఫ్లాన్ టేప్)
• Basin రెంచ్ (ఐచ్ఛికం, ఇరుకైన ప్రదేశాలకు)
• భద్రతా అద్దాలు

5. సెటప్ మరియు ఇన్‌స్టాలేషన్

This faucet is designed for a deck mount 8" to 16" widespread 3-hole installation with standard 1/2" IPS connections.

5.1 Prepare the Installation Area

1. బాత్రూమ్ కు ప్రధాన నీటి సరఫరాను ఆపివేయండి.
2. Remove any existing faucet and clean the sink surface thoroughly.
3. Ensure the sink has three mounting holes, spaced between 8 and 16 inches apart.

5.2 Install Faucet Handles

1. Apply a thin bead of plumber's putty or silicone sealant around the base of each handle assembly.
2. Insert the handle shanks through the outer holes of the sink deck.
3. From underneath the sink, secure each handle with the provided washers and mounting nuts. Hand-tighten, then use a wrench for a final snug turn. Do not overtighten.

చిత్రం: క్లోజప్ view of the hot and cold cross handles, showing their design and labeling.

5.3 Install Faucet Spout

1. Apply plumber's putty or silicone sealant around the base of the faucet spout.
2. Insert the spout shank through the center hole of the sink deck.
3. From underneath, secure the spout with the provided washer and mounting nut. Tighten securely.

చిత్రం: వివరణాత్మకం view of the faucet spout, highlighting its polished nickel finish and elegant curve.

5.4 Connect Water Supply Lines

1. Connect the hot and cold water supply lines to the corresponding inlets on the handle assemblies. Use thread seal tape on threaded connections.
2. Connect the other ends of the supply lines to your hot and cold water stops.
3. Connect the flexible hoses from the handle assemblies to the faucet spout's inlet.

5.5 Install Pop-Up Drain

1. Disassemble the pop-up drain assembly.
2. Apply plumber's putty or silicone sealant to the underside of the drain flange.
3. Insert the drain flange into the sink drain hole.
4. From underneath, install the rubber washer, friction washer, and mounting nut onto the drain body. Tighten securely.
5. Connect the pop-up rod to the drain stopper and the lift rod from the faucet spout.

చిత్రం: పేలింది view diagram of a drain with overflow, illustrating components like the clevis screw, spring clip, plunger, and clevis strap for proper assembly.

5.6 తుది దశలు

1. Turn on the main water supply slowly and check for any leaks.
2. Run both hot and cold water through the faucet for a few minutes to flush out any debris.

Image: Technical diagram showing the dimensions and connection points for the Kingston Brass widespread lavatory faucet, model KS2980AX series.

6. ఆపరేటింగ్ సూచనలు

Your Kingston Brass Governor faucet features two cross handles for precise control of water temperature and flow.

• చల్లని నీరు: Turn the right handle counter-clockwise to open for cold water.
• వేడి నీరు: Turn the left handle counter-clockwise to open for hot water.
• ఉష్ణోగ్రత నియంత్రణ: Adjust the hot and cold handles simultaneously to achieve the desired water temperature.
• ఫ్లో రేట్: The faucet has a flow rate of 1.2 Gallons Per Minute (GPM) at 60 PSI.

చిత్రం: క్లోజప్ view of one of the cross handles, indicating its function for water control.

7. నిర్వహణ

Proper care and maintenance will ensure the lasting beauty and performance of your faucet.

7.1 శుభ్రపరచడం

• Clean the faucet regularly with a soft cloth and warm, soapy water.
• Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the polished nickel finish.
• శుభ్రం చేసిన తర్వాత బాగా కడిగి, నీటి మరకలను నివారించడానికి మృదువైన గుడ్డతో ఆరబెట్టండి.

7.2 Ceramic Disc Cartridge

Your faucet is equipped with a drip-free ceramic disc cartridge, designed for long-term reliability. If a leak occurs from the handles, the cartridge may need to be replaced. Contact customer support for replacement parts.

8. ట్రబుల్షూటింగ్

9. స్పెసిఫికేషన్లు

10. వారంటీ సమాచారం

This Kingston Brass faucet comes with a limited warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty documentation included with your purchase or visit the official Kingston Brass webవారంటీ క్లెయిమ్‌ల కోసం మీ కొనుగోలు రుజువును ఉంచండి.

11. కస్టమర్ మద్దతు

If you have any questions, require technical assistance, or need to order replacement parts, please contact Kingston Brass customer support:

• Webసైట్: www.kingstonbrass.com
• ఫోన్: కింగ్స్టన్ బ్రాస్ ను చూడండి webప్రస్తుత కాంటాక్ట్ నంబర్ల కోసం సైట్.
• ఇమెయిల్: కింగ్స్టన్ బ్రాస్ ను చూడండి webకస్టమర్ సర్వీస్ ఇమెయిల్ కోసం సైట్.

Please have your model number (KS2986AX) and purchase date available when contacting support.