SONICAKE QCE-10-40
SONICAKE Black Hammer Multi-Effect Pedal
Model: QCE-10-40
పరిచయం
The SONICAKE Black Hammer is a versatile guitar multi-effect pedal designed to provide essential tonal components for metal music. It integrates Boost, Hi-Gain Distortion, Chorus, and Delay effects into a single, compact unit. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Black Hammer pedal to ensure optimal performance.

ముందు view of the SONICAKE Black Hammer Multi-Effect Pedal, showcasing its compact design and integrated controls for various effects.
సెటప్
Before using your SONICAKE Black Hammer pedal, please follow these steps to ensure proper setup and functionality.
1. ప్యాకేజీ విషయాలు
- SONICAKE Black Hammer Multi-Effect Pedal
- వినియోగదారు మాన్యువల్
- 9V DC పవర్ అడాప్టర్
2 శక్తి అవసరాలు
The Black Hammer pedal requires a 9V DC power adapter. Ensure the adapter's polarity is negative center. Using an incorrect power supply may damage the unit and void the warranty.
3. Connecting the Pedal
- మీ గిటార్ని కనెక్ట్ చేయండి ఇన్పుట్ jack on the pedal using a standard 1/4-inch instrument cable.
- కనెక్ట్ చేయండి అవుట్పుట్ jack of the pedal to your amplifier's input using another 1/4-inch instrument cable.
- Plug the 9V DC power adapter into the DC 9V input on the pedal and then into a power outlet.

The Black Hammer pedal is shown connected to a guitar and amplifier, illustrating a typical setup for use.
పెడల్ ఆపరేటింగ్
The Black Hammer pedal features four distinct effects, each with intuitive controls and LED indicators for active status.

This image illustrates the four core effects integrated into the Black Hammer pedal: Boost, Hi-Gain Distortion, Chorus, and Delay, each with dedicated controls.
ప్రభావ మాడ్యూల్స్:
- బూస్ట్: This module provides a pre-gain boost to increase the volume and drive of your signal, ideal for pushing your amplifier or the Hi-Gain section for solos and heavy riffs.
- HI-GAIN: An analog high-gain distortion with a versatile 3-band EQ (Bass, Mid, Treble) and a smart Noise Gate (NR) to eliminate unwanted hum and feedback. The Volume knob controls the overall output level of the distortion.
- కోరస్: A BBD-style analog-sounding chorus effect. Controls include Level (mix of wet/dry signal), Depth (intensity of the chorus effect), and Rate (speed of the chorus modulation).
- ఆలస్యం: A 500ms analog-voicing delay. Controls include Mix (wet/dry signal blend), Repeat (number of repeats), and Time (delay time).
LED సూచికలు:
Each effect module features LED-illuminated control knobs that clearly indicate their working status. When an effect is active, its corresponding LEDs will light up, providing immediate visual feedback.

Close-up of the pedal's LED-illuminated control knobs, providing clear visual feedback on the active status of each effect, especially useful in low-light conditions.
నిజమైన బైపాస్:
The Black Hammer pedal features true bypass switching, ensuring that your guitar's signal remains unaffected when the pedal is disengaged. This preserves your original tone without any coloration or signal degradation.
నిర్వహణ
Proper care and maintenance will extend the lifespan of your SONICAKE Black Hammer pedal.
- శుభ్రపరచడం: Use a soft, dry cloth to clean the pedal's surface. Avoid using abrasive cleaners, solvents, or excessive moisture, which can damage the finish or internal components.
- నిల్వ: When not in use, store the pedal in a dry, cool environment away from direct sunlight and extreme temperatures. Disconnect the power adapter when storing for extended periods.
- కనెక్షన్లు: Regularly check all input and output jacks for dust or debris. Ensure cables are securely connected to prevent signal loss or intermittent issues.
ట్రబుల్షూటింగ్
If you encounter issues with your Black Hammer pedal, refer to the following common problems and solutions:
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| సౌండ్ లేదు | Incorrect power supply; loose cable connections; pedal not engaged. | Verify 9V DC power adapter is correctly connected. Check all instrument cables. Ensure the effect is engaged (LEDs lit). |
| Unwanted Noise/Hum | Ground loop; faulty cables; high gain settings. | Use a high-quality isolated power supply. Try different cables. Adjust the Noise Gate (NR) knob on the Hi-Gain section. Reduce gain settings. |
| ప్రభావం ఆకర్షణీయంగా లేదు | Footswitch issue; internal fault. | Ensure the footswitch is fully pressed. If the issue persists, contact customer support. |
| బలహీనమైన/వికృతమైన ధ్వని | Incorrect level settings; impedance mismatch. | Adjust the Level/Volume knobs on the pedal. Ensure your amplifier's input impedance is compatible. |
స్పెసిఫికేషన్లు
- వస్తువు బరువు: 1.1 పౌండ్లు (0.5 కిలోగ్రాములు)
- ఉత్పత్తి కొలతలు: 10.31"లీ x 2.52"వా x 1.73"హ
- అంశం మోడల్ సంఖ్య: QCE-10-40
- సిగ్నల్ ఫార్మాట్: అనలాగ్
- శక్తి మూలం: అడాప్టర్
- వాల్యూమ్tage: 9 వోల్ట్లు
- Effects Included: Delay, Chorus, Multi Effects, Distortion
వారంటీ మరియు మద్దతు
SONICAKE products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please visit the official SONICAKE webసైట్లో లేదా వారి కస్టమర్ సర్వీస్ విభాగాన్ని సంప్రదించండి. ఏవైనా వారంటీ క్లెయిమ్లకు కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదును ఉంచండి.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.