Plozoe Mini USB Dash Cam Hardwire Kit Instruction Manual

1. పరిచయం

The Plozoe Mini USB Hardwire Kit is designed to provide continuous power to your dash cam or other Mini USB devices, enabling 24-hour surveillance and parking mode functionality without draining your vehicle's battery. This kit converts 12V-24V vehicle power to 5V, ensuring stable operation and protecting your devices against excessive current and overheating. It is compatible with most car models and Mini USB devices such as dash cams, mirror cams, GPS navigators, and radar detectors.

2. ప్యాకేజీ విషయాలు

దయచేసి మీ ప్యాకేజీలో అన్ని అంశాలు ఉన్నాయని ధృవీకరించండి:

• 1 x Mini USB Hardwire Kit (11.5ft cable)
• 1 x Mini USB Female to Type-C Male Adapter Cable (for newer dash cams)
• 1 x Installing Crowbar
• 4 x Fuse Tap Cables (various types to match different car models)
• 4 x Fuses (various types to match different car models)

3. స్పెసిఫికేషన్లు

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

Proper installation of the hardwire kit is crucial for optimal performance and safety. If you are unsure about any steps, it is recommended to seek professional assistance.

4.1 Identifying Fuse Box Location and Wire Types

First, locate your vehicle's fuse box. This is typically found under the dashboard on the driver's side, in the glove compartment, or in the trunk near the battery. Use the included pry bar to carefully remove any panels covering the fuse box.

The hardwire kit has three wires:

• రెడ్ వైర్ (ACC): Connects to a fuse that receives power only when the vehicle's ignition is on.
• Yellow Wire (BAT): Connects to a fuse that has constant power, even when the vehicle's ignition is off. This enables 24-hour surveillance.
• Black Wire (GND): Connects to a metal part of the vehicle's chassis for grounding.

Use a multimeter or a circuit tester to identify the correct fuse slots for the ACC and BAT wires. Consult your vehicle's owner's manual for the fuse diagram.

4.2 Connecting the Fuse Taps

Select the appropriate fuse tap cables from the package that match the size of your vehicle's fuses. Each fuse tap has two slots: one for the original fuse from your car and one for the new fuse for the dash cam.

Connect the red (ACC) wire to the fuse tap for the ignition-switched fuse, and the yellow (BAT) wire to the fuse tap for the constant power fuse. Insert the original fuse into the lower slot of the fuse tap and the new fuse (provided) into the upper slot.

4.3 Grounding the Kit

Connect the black (GND) wire to a metal bolt or screw on the vehicle's chassis. Ensure a secure connection for proper grounding.

4.4 Routing the Cable

Carefully route the Mini USB cable from the fuse box to your dash cam's mounting location. Use the included pry bar to tuck the cable neatly along the vehicle's trim, headliner, and A-pillar to keep it hidden and secure. Avoid interfering with airbags or other safety features.

4.5 Connecting to Dash Cam

Plug the Mini USB connector into your dash cam. If your dash cam uses a Type-C port, use the provided Mini USB female to Type-C male adapter cable.

4.6 ఇన్‌స్టాలేషన్ వీడియోలు

5. ఆపరేటింగ్ సూచనలు

Once the hardwire kit is correctly installed, your dash cam will receive continuous power, enabling its parking mode and 24-hour surveillance features.

5.1 24-Hour Surveillance / Parking Mode

The yellow (BAT) wire connection ensures that your dash cam remains powered even when the vehicle is turned off. This allows the dash cam to record events while parked, providing continuous monitoring. Refer to your dash cam's specific instruction manual to activate and configure its parking mode settings (e.g., motion detection, G-sensor, time-lapse recording).

5.2 తక్కువ వాల్యూమ్tagఇ రక్షణ

The hardwire kit features built-in low voltage protection. If your vehicle's battery voltage drops below 11.6V (for 12V systems) or 23.5V (for 24V systems), the kit will automatically cut off power to the dash cam. This prevents excessive battery drain, ensuring you have enough power to start your car.

6. నిర్వహణ

To ensure the longevity and reliable performance of your Plozoe Mini USB Hardwire Kit, consider the following maintenance tips:

• సాధారణ తనిఖీలు: Periodically inspect all connections (fuse taps, ground wire, Mini USB connector) to ensure they are secure and free from corrosion.
• కేబుల్ సమగ్రత: Check the routed cable for any signs of wear, pinching, or damage. Ensure it remains tucked away from moving parts or sharp edges.
• ఫ్యూజ్ ప్రత్యామ్నాయం: If your dash cam stops receiving power, check the fuses in the fuse taps. Replace any blown fuses with new ones of the same ampకోపం.
• పరిశుభ్రత: Keep the fuse box area clean and free from dust or debris.

7. ట్రబుల్షూటింగ్

If you encounter issues with your hardwire kit, refer to the following common problems and solutions:

• Dash Cam Not Turning On:
  • Ensure both the red (ACC) and yellow (BAT) wires are correctly connected to their respective fuse slots and receiving power.
  • Check the fuses in the fuse taps. Replace if blown.
  • Verify the black (GND) wire has a secure connection to the vehicle's chassis.
  • Confirm the Mini USB connector is fully inserted into the dash cam.
• Dash Cam Not Recording in Parking Mode:
  • Ensure the yellow (BAT) wire is connected to a constant power fuse.
  • Check your dash cam's settings to ensure parking mode is enabled and configured correctly.
  • వాహనం యొక్క బ్యాటరీ వాల్యూమ్‌ను ధృవీకరించండిtage తక్కువ వాల్యూమ్ కంటే ఎక్కువగా ఉంటుందిtage cutoff threshold.
• Vehicle Battery Drains Quickly:
  • The hardwire kit has low voltage protection. If your battery is still draining, ensure the kit is functioning correctly.
  • Check for other accessories in your vehicle that might be drawing power while the engine is off.
  • Consider adjusting your dash cam's parking mode settings to reduce power consumption (e.g., shorter recording times, less sensitive motion detection).

8. వారంటీ మరియు మద్దతు

For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Plozoe webసైట్. ఏవైనా వారంటీ క్లెయిమ్‌లకు కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదును ఉంచండి.