SEBSON GS536GC Photoelectric Smoke Detector User Manual

పరిచయం

The SEBSON GS536GC photoelectric smoke detector is designed to provide early warning of dangerous smoke development. This device is certified according to DIN EN 14604 standards, ensuring reliable performance. Upon detecting smoke, the alarm emits a loud sound to alert occupants. The detector also features a self-test function and a low battery warning system for continuous safety monitoring.

ప్యాకేజీ విషయాలు

క్రింద జాబితా చేయబడిన అన్ని అంశాలు మీ ప్యాకేజీలో ఉన్నాయని నిర్ధారించుకోండి:

• 6 x SEBSON GS536GC Smoke Detectors
• 6 x 9V DC Block Batteries (Alkaline)
• 12 x మౌంటు స్క్రూలు

భద్రతా సమాచారం

Please read and understand all safety instructions before installation and use. Failure to do so may result in improper operation and potential hazards.

• పెయింట్ చేయవద్దు: Never paint the smoke detector. Paint can clog the sensing chambers and prevent the unit from operating correctly.
• రెగ్యులర్ టెస్టింగ్: Test the smoke detector weekly to ensure it is functioning properly.
• బ్యాటరీ భర్తీ: Replace the battery immediately when the low battery warning sounds. Although the included battery has a 5-year life, individual battery performance may vary.
• ప్లేస్‌మెంట్: Install smoke detectors in all sleeping areas and on every level of your home, including the basement.
• నిర్వహణ: Keep the detector clean and free from dust.
• పారవేయడం: Dispose of used batteries and the smoke detector according to local regulations.

సెటప్ మరియు ఇన్‌స్టాలేషన్

Proper installation is crucial for the effective operation of your smoke detector.

1. సంస్థాపనా స్థానమును ఎంచుకోవడం

Install smoke detectors on the ceiling in the center of the room, or at least 50 cm (20 inches) from any wall. Avoid installing in:

• Kitchens, bathrooms, or garages where cooking fumes, steam, or exhaust can cause false alarms.
• Near ventilation openings, air conditioners, or fans, as air currents can prevent smoke from reaching the detector.
• Areas with high humidity or extreme temperatures (outside 0°C to +37°C).

Image: A SEBSON GS536GC smoke detector mounted on a white ceiling, demonstrating a typical installation location.

2. బ్యాటరీ ఇన్‌స్టాలేషన్

1. Remove the mounting bracket from the smoke detector by twisting it counter-clockwise.
2. Insert the provided 9V DC block battery into the battery compartment, ensuring correct polarity (+/-).
3. The detector will emit a short beep to indicate successful battery installation.

3. డిటెక్టర్‌ను అమర్చడం

You can mount the detector using the included screws or an appropriate adhesive (not included).

1. స్క్రూ మౌంటు:
   • Mark two drill holes on the ceiling using the mounting bracket as a template.
   • అవసరమైతే రంధ్రాలు వేసి, వాల్ ప్లగ్‌లను చొప్పించండి.
   • అందించిన స్క్రూలను ఉపయోగించి మౌంటు బ్రాకెట్‌ను పైకప్పుకు అటాచ్ చేయండి.
   • Align the smoke detector with the mounting bracket and twist clockwise until it locks securely in place.
2. Adhesive Mounting (Optional, not recommended for all surfaces):
   • Ensure the ceiling surface is clean, dry, and smooth.
   • Apply a suitable adhesive (e.g., double-sided adhesive pad, not included) to the back of the mounting bracket.
   • Press the bracket firmly onto the desired ceiling location for at least 30 seconds.
   • Align the smoke detector with the mounting bracket and twist clockwise until it locks securely in place.

Image: Technical drawing illustrating the dimensions of the smoke detector (90mm diameter, 31mm height).

Image: Another technical drawing providing an isometric view of the smoke detector with its dimensions.

ఆపరేటింగ్ సూచనలు

సాధారణ ఆపరేషన్

Once installed with a fresh battery, the smoke detector will enter normal operating mode. A short flash of the LED indicator every 32 seconds confirms that the unit is powered on and performing its self-test function.

చిత్రం: ముందు భాగం view of the smoke detector, highlighting the test button and LED indicator area.

డిటెక్టర్‌ని పరీక్షిస్తోంది

To manually test the smoke detector, press and hold the central test button for approximately 5 seconds. The alarm will sound loudly, and the LED will flash rapidly. Release the button to stop the alarm. This test verifies the battery, alarm, and sensing circuitry are working correctly.

అలారం సిగ్నల్

When smoke is detected, the alarm will emit a loud, continuous sound (≥ 85 dB at 3 meters) and the LED will flash rapidly. In case of an alarm, evacuate the premises immediately and contact emergency services.

తక్కువ బ్యాటరీ హెచ్చరిక

When the battery is low, the detector will emit a short chirp approximately every 30-40 seconds, accompanied by a brief LED flash. This indicates that the battery needs to be replaced immediately.

నిర్వహణ

Regular maintenance ensures the continued reliability of your smoke detector.

• వీక్లీ టెస్టింగ్: Press the test button weekly to confirm the alarm is functioning.
• నెలవారీ శుభ్రపరచడం: Gently vacuum the exterior of the smoke detector with a soft brush attachment to remove dust and cobwebs. Do not use cleaning agents or solvents.
• బ్యాటరీ భర్తీ: Replace the 9V alkaline battery when the low battery warning sounds. Although the battery has a 5-year life, it is replaceable. Always use a fresh, high-quality 9V alkaline battery.

చిత్రం: వైపు view of the smoke detector, illustrating the air intake vents that should be kept clear of dust.

ట్రబుల్షూటింగ్

స్పెసిఫికేషన్లు

వారంటీ మరియు మద్దతు

వారంటీ సమాచారం లేదా సాంకేతిక మద్దతు కోసం, దయచేసి తయారీదారు అధికారిని చూడండి. webసైట్‌లో లేదా వారి కస్టమర్ సర్వీస్‌ను నేరుగా సంప్రదించండి. కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదును ఉంచండి.

తయారీదారు: SEBSON