Electro-Voice F.01U.354.219

Electro-Voice RE3-RE520-5L Wireless Handheld System User Manual

Model: F.01U.354.219 | Brand: Electro-Voice

1. పరిచయం

This manual provides detailed instructions for the setup, operation, and maintenance of the Electro-Voice RE3-RE520-5L Wireless Handheld System. This system features an RE520 condenser supercardioid microphone head, designed for vocal performance and presentations. The RE520 offers a detailed, full, and vivid sound with a tight and clear low end, natural and present midrange, and an exceptionally-detailed high end. Its supercardioid pattern ensures excellent acoustic isolation. The RE3 system facilitates quick and simple setup through its clear frequency scan and sync functions, providing rock-solid system performance via the robust handheld transmitter and diversity receiver.

2. సిస్టమ్ భాగాలు

The Electro-Voice RE3-RE520-5L Wireless Handheld System typically includes the following components:

  • RE3-HHT Handheld Transmitter: Equipped with the RE520 condenser supercardioid microphone head.
  • RE3 UHF Diversity Receiver: The base unit that receives the wireless signal from the transmitter.
  • రిసీవర్ కోసం విద్యుత్ సరఫరా
  • Antennas for Receiver
  • మైక్రోఫోన్ క్లిప్
  • వినియోగదారు మాన్యువల్ (ఈ పత్రం)
Electro-Voice RE3-RE520-5L Wireless Handheld System showing the RE3 UHF Diversity Receiver and the RE3-HHT handheld microphone.

Figure 2.1: The Electro-Voice RE3-RE520-5L Wireless Handheld System, featuring the RE3 UHF Diversity Receiver and the RE3-HHT handheld microphone. The receiver displays "RE3-RX G:1 CH:1 560.325 MHz" and signal indicators, while the microphone's display shows "10.325 MHz".

3. సెటప్

  1. రిసీవర్ ప్లేస్‌మెంట్: Position the RE3 UHF Diversity Receiver in a location free from obstructions and away from other wireless devices that might cause interference. Ensure good line-of-sight to the intended operating area of the handheld transmitter.
  2. యాంటెన్నా కనెక్షన్: Screw the two included antennas onto the antenna connectors on the rear of the receiver. Position them at a 45-degree angle for optimal reception.
  3. పవర్ కనెక్షన్: Connect the supplied power adapter to the DC input on the receiver and plug it into an appropriate power outlet.
  4. ఆడియో అవుట్‌పుట్: Connect the receiver's audio output (XLR or 1/4-inch jack) to your mixer, amplifier, or audio interface using a suitable audio cable.
  5. ట్రాన్స్‌మిటర్ బ్యాటరీ ఇన్‌స్టాలేషన్: Unscrew the bottom cap of the RE3-HHT handheld transmitter. Insert two fresh AA batteries, observing the correct polarity (+/-). Replace the cap securely.
  6. పవర్ ఆన్: Power on the receiver by pressing its power button. Power on the handheld transmitter by pressing and holding its power button.
  7. ఫ్రీక్వెన్సీ స్కాన్ మరియు సమకాలీకరణ:
    • On the receiver, press the "SCAN" button to find an available clear frequency.
    • Once a clear frequency is found, align the infrared (IR) port on the receiver with the IR port on the handheld transmitter (usually located near the battery compartment or display).
    • Press the "SYNC" button on the receiver. The frequency information will be transmitted to the handheld transmitter, and both devices should now be tuned to the same frequency. Confirm the frequency displayed on both units matches.
  8. ఆడియో తనిఖీ: Speak into the microphone and observe the AF (Audio Frequency) level indicators on the receiver. Adjust the gain on your mixer or ampఅవసరాన్ని బట్టి జీవం పోసేవాడు.

4. ఆపరేటింగ్ సూచనలు

4.1 Handheld Transmitter (RE3-HHT)

  • పవర్ ఆన్/ఆఫ్: Press and hold the power button for approximately 2 seconds to turn the transmitter on or off.
  • ప్రదర్శన: The display shows the current operating frequency and battery status.
  • బ్యాటరీ లైఫ్: Monitor the battery indicator on the transmitter's display. Replace batteries when the indicator shows low power to avoid interruptions.

4.2 Diversity Receiver (RE3-RX)

  • పవర్ ఆన్/ఆఫ్: Press the power button to turn the receiver on or off.
  • ప్రదర్శన: The display shows channel information, group, frequency, RF (Radio Frequency) signal strength, and AF (Audio Frequency) levels.
  • RF సూచికలు: The RF indicators (LEDs or on-screen meter) show the strength of the wireless signal from the transmitter. Ensure a strong, stable signal for optimal performance.
  • AF Indicators: The AF indicators show the audio signal level being received. Adjust the transmitter's gain or your mixer's input gain to prevent clipping (overload) while ensuring sufficient signal.
  • మెను నావిగేషన్: Use the navigation buttons (up/down, set) to access and adjust settings such as group, channel, squelch level, and output gain. Refer to the detailed receiver manual for advanced settings.

5. నిర్వహణ

  • బ్యాటరీ భర్తీ: Always use fresh, high-quality AA alkaline or rechargeable batteries for the handheld transmitter. Remove batteries if the system will not be used for an extended period to prevent leakage.
  • శుభ్రపరచడం:
    • Wipe the exterior of the microphone and receiver with a soft, dry cloth.
    • మొండి ధూళికి, కొద్దిగా damp వస్త్రాన్ని ఉపయోగించవచ్చు, కానీ లోపలి భాగాలలోకి తేమ రాకుండా చూసుకోండి.
    • రాపిడి క్లీనర్లు, ద్రావకాలు లేదా కఠినమైన రసాయనాలను ఉపయోగించవద్దు.
  • Microphone Head Care: Periodically check the microphone grille for debris. If necessary, gently clean with a soft brush. Avoid poking anything through the grille.
  • నిల్వ: Store the system in a cool, dry place, away from direct sunlight and extreme temperatures. Use the original packaging or a padded case for transport and storage to protect components.

6. ట్రబుల్షూటింగ్

సమస్యసాధ్యమైన కారణంపరిష్కారం
సౌండ్ లేదుTransmitter or receiver not powered on; Batteries dead; Incorrect frequency sync; Audio cable disconnected; Mixer/ampలైఫైయర్ ఇన్‌పుట్ సమస్యలు.Ensure both units are powered on. Replace batteries. Resync frequency. Check all cable connections. Verify mixer/ampలైఫైయర్ సెట్టింగులు.
జోక్యం/స్థిరత్వంNearby wireless devices; Operating too close to metal objects; Weak signal; Frequency conflict.Perform a frequency scan and sync to a clear channel. Reposition receiver and transmitter. Ensure line-of-sight. Check antenna connections.
తక్కువ వాల్యూమ్/వక్రీకరణIncorrect gain settings; Microphone too far from source; Damaged microphone head.Adjust transmitter gain and receiver output level. Speak closer to the microphone. If distortion persists, contact support.
Transmitter Display BlankDead batteries; Transmitter not powered on.Replace batteries. Press and hold power button to turn on.

7. స్పెసిఫికేషన్లు

  • మోడల్: F.01U.354.219
  • బ్రాండ్: ఎలక్ట్రో-వాయిస్
  • మైక్రోఫోన్ ఫారమ్ ఫ్యాక్టర్: హ్యాండ్హెల్డ్
  • ధ్రువ నమూనా: Unidirectional (Supercardioid for RE520 head)
  • కనెక్టివిటీ టెక్నాలజీ: వైర్‌లెస్ (RF)
  • ఫ్రీక్వెన్సీ రెస్పాన్స్: 488-524MHz (System operating range)
  • ఛానెల్‌ల సంఖ్య: 1 (per system)
  • పవర్ సోర్స్ (ట్రాన్స్మిటర్): Battery Powered (AA batteries)
  • వస్తువు బరువు: Approximately 6.35 pounds (System total)
  • ప్యాకేజీ కొలతలు: సుమారు 7.87 x 4.72 x 3.15 అంగుళాలు
  • UPC: 800549898485
  • తయారీదారు: ఎలక్ట్రో-వాయిస్
  • మొదటి తేదీ అందుబాటులో ఉంది: మార్చి 1, 2019

8. వారంటీ మరియు మద్దతు

For warranty information, please refer to the warranty card included with your product or visit the official Electro-Voice webవారంటీ క్లెయిమ్‌ల కోసం మీ కొనుగోలు రుజువును ఉంచండి.

If you encounter issues not covered in this manual or require technical assistance, please contact Electro-Voice customer support. Contact details can typically be found on the manufacturer's webసైట్ లేదా ఉత్పత్తి ప్యాకేజింగ్‌లో.

Electro-Voice Official Webసైట్: www.electrovoice.com

© 2024 Electro-Voice. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.