Gebildet AC 110V 22mm LED Pilot Signal Light Instruction Manual

పరిచయం

Thank you for choosing the Gebildet AC 110V 22mm LED Pilot Signal Lights. These indicators are designed for clear visual signaling in various electrical equipment, machinery, and control panels. This manual provides essential information for safe installation, operation, and maintenance of your LED signal lights.

Image: A collection of Gebildet 22mm LED pilot signal lights, showcasing the available colors: red, green, blue, white, and yellow.

ఉత్పత్తి ముగిసిందిview

కీ ఫీచర్లు

• వాల్యూమ్tage: 110V AC
• ప్రస్తుత: 20mA
• మౌంటు హోల్ వ్యాసం: 22మి.మీ
• LED రంగులు: Red, Yellow, Blue, Green (available in various packs)
• ప్రకాశం: ≥ 100cd/㎡
• యాంత్రిక జీవితం: ≥ 1,000,000 చక్రాలు
• విద్యుత్ జీవితం: ≥ 500,000 చక్రాలు
• ఆపరేటింగ్ ఉష్ణోగ్రత: -25 ℃ నుండి +55 ℃
• షాక్ మరియు వైబ్రేషన్ రెసిస్టెంట్
• మెటీరియల్: మన్నికైన ప్లాస్టిక్
• రక్షణ తరగతి: IP65

ప్యాకేజీ విషయాలు

• 12 x LED Indicator Lights (typically 3 each of Red, Yellow, Blue, Green)
• Mounting Nuts and Washers (pre-assembled or included for installation)

సెటప్ మరియు ఇన్‌స్టాలేషన్

భద్రతా జాగ్రత్తలు

• Ensure power is disconnected from the circuit before attempting any installation.
• Installation should be performed by qualified personnel to prevent electrical hazards.
• సరైన సంపుటాన్ని ధృవీకరించండిtage (110V AC) before connecting the indicator lights.

మౌంటు సూచనలు

1. Drill a 22mm diameter hole in the desired panel location. The panel thickness should be between 1mm and 4mm.
2. Insert the LED indicator light into the drilled hole from the front of the panel.
3. From the rear of the panel, secure the indicator by tightening the provided mounting nut and washer.

వైరింగ్ సూచనలు

Connect the two screw terminals located on the back of the indicator to your 110V AC power source. For AC indicators, polarity is generally not critical, but ensure all connections are secure and properly insulated to prevent short circuits.

చిత్రం: విడదీయబడింది view of the LED indicator light, showing the main body, lens, mounting nut, washer, and screw terminals for electrical connection.

ఆపరేటింగ్ సూచనలు

ప్రాథమిక ఆపరేషన్

Once the LED indicator light is correctly installed and wired, it will illuminate when power is supplied to its terminals. The light serves as a clear visual signal for the operational status of the connected circuit or equipment.

చిత్రం: ఉదాample application of Gebildet LED pilot lights on a control panel, illustrating their use for various status indications such as 'STOP', 'START-UP', 'FUNCTION', and 'SUSPEND'.

నిర్వహణ

క్లీనింగ్

To maintain optimal visibility, wipe the indicator lens with a soft, dry cloth. Avoid using abrasive cleaners, harsh chemicals, or solvents, as these can damage the plastic material.

తనిఖీ

Periodically inspect the wiring connections to ensure they remain tight and show no signs of wear or corrosion. Also, check that the mounting nut is securely fastened.

రక్షిత చిత్రం

The indicator lens may come with a thin protective film. For the clearest display, gently peel this film off before initial use.

Image: Close-up of an LED indicator light, demonstrating the removal of the protective film from the lens for improved visibility and clarity.

ట్రబుల్షూటింగ్

Light Does Not Illuminate

• విద్యుత్ సరఫరాను తనిఖీ చేయండి: Ensure that 110V AC power is correctly supplied to the indicator terminals. Use a multimeter to verify voltagఅవసరమైతే.
• వైరింగ్ తనిఖీ చేయండి: Verify that all connections are secure and correctly wired according to the installation instructions.
• నష్టం కోసం తనిఖీ చేయండి: Visually inspect the indicator for any visible damage to the housing or terminals.

డిమ్ లేదా మినుకుమినుకుమనే కాంతి

• వాల్యూమ్tagఇ హెచ్చుతగ్గులు: Ensure a stable 110V AC power source. Unstable voltage can cause inconsistent illumination.
• లూజ్ కనెక్షన్: Re-check all wiring connections to ensure they are tight and making good contact.

చిత్రం: అంతర్గతం view of an LED indicator light, pointing out the voltage stabilizing chip responsible for consistent brightness and extended operational life.

సాంకేతిక లక్షణాలు

Image: Dimensional diagram of the LED indicator light, detailing its physical measurements and key electrical specifications.

వారంటీ మరియు మద్దతు

Gebildet products are manufactured to high-quality standards. For any questions, technical assistance, or support regarding your LED Pilot Signal Lights, please contact your retailer or the manufacturer directly. Please retain your proof of purchase for warranty claims.