1. పరిచయం
This manual provides detailed instructions for the installation, operation, and maintenance of the DollaTek 1803BW DC PWM Motor Speed Controller. This compact and efficient module is designed to control the speed of low-voltage DC motors by adjusting the Pulse Width Modulation (PWM) signal. It is suitable for various applications requiring precise motor speed regulation.
2 ఫీచర్లు
- PWM వేగ నియంత్రణ: Controls DC motor speed by adjusting the Pulse Width Modulation.
- వైడ్ వాల్యూమ్tagఇ పరిధి: Compatible with input voltages from 1.8V DC to 15V DC.
- ప్రస్తుత సామర్థ్యం: Supports currents up to 2 Ampఈరెస్.
- ఓవర్ కరెంట్ రక్షణ: Integrated 2A fuse provides protection against excessive current. The fuse is designed to reset automatically once cooled after an overcurrent event.
- కాంపాక్ట్ డిజైన్: Small dimensions (32 x 32 x 14 mm) for easy integration into projects.
- External Potentiometer Connection: Designed for connection with an external potentiometer for speed adjustment (potentiometer not included with the module itself, but shown in some product images as an example of use).
3. స్పెసిఫికేషన్లు
| పరామితి | విలువ |
|---|---|
| ఇన్పుట్ వాల్యూమ్tage | డిసి 1.8 వి - 15 వి |
| గరిష్ట కరెంట్ | 2A |
| కొలతలు (L x W x H) | 32 mm x 32 mm x 14 mm |
| ఓవర్ కరెంట్ రక్షణ | 2A రీసెట్ చేయగల ఫ్యూజ్ |
| నియంత్రణ పద్ధతి | పల్స్ వెడల్పు మాడ్యులేషన్ (PWM) |
4. ప్యాకేజీ విషయాలు
- DollaTek 1803BW DC PWM Motor Speed Controller Module (Quantity: 2, as per product description)
Note: Potentiometer for speed adjustment is typically sold separately or connected externally.
5. భద్రతా సమాచారం
ఈ ఉత్పత్తిని ఉపయోగించే ముందు దయచేసి అన్ని భద్రతా సూచనలను చదివి అర్థం చేసుకోండి. ఈ సూచనలను పాటించడంలో విఫలమైతే విద్యుత్ షాక్, అగ్ని ప్రమాదం లేదా తీవ్రమైన గాయం సంభవించవచ్చు.
- ఇన్పుట్ వాల్యూమ్ని నిర్ధారించుకోండిtage and current do not exceed the specified limits (DC 1.8V-15V, 2A).
- Always disconnect power before making any connections or disconnections.
- Avoid short circuits between terminals.
- మాడ్యూల్ను తేమ, విపరీతమైన ఉష్ణోగ్రతలు లేదా తినివేయు వాతావరణాలకు గురిచేయవద్దు.
- ఈ ఉత్పత్తి బొమ్మ కాదు. పిల్లలకు దూరంగా ఉంచండి.
- If the module shows signs of damage or malfunction, discontinue use immediately.
6. సెటప్ మరియు ఇన్స్టాలేషన్
The DollaTek 1803BW controller features clear markings for power input and motor output connections. Refer to the diagrams below for proper wiring.
మూర్తి 6.1: టాప్ view of the controller module, highlighting the main components and connection points.
మూర్తి 6.2: దిగువన view of the controller module, indicating the power input and motor output solder pads. The labels 'Power+' and 'Power-' are for the DC power supply, and 'Motor+' and 'Motor-' are for the DC motor connections.
6.1 వైరింగ్ కనెక్షన్లు
- పవర్ ఇన్పుట్: Connect your DC power supply (1.8V to 15V) to the terminals labeled "Power+" and "Power-". Ensure correct polarity.
- మోటార్ అవుట్పుట్: Connect your DC motor to the terminals labeled "Motor+" and "Motor-". The polarity for the motor connections will determine the direction of rotation.
- పొటెన్షియోమీటర్ కనెక్షన్: The module includes a 3-pin header for connecting an external potentiometer (typically 10KΩ linear taper). Connect the potentiometer's outer pins to the module's outer pins on the 3-pin header, and the potentiometer's wiper (middle pin) to the module's middle pin.
మూర్తి 6.3: Example of the controller module connected to an external potentiometer for speed adjustment. The potentiometer allows for variable resistance to control the PWM signal.
6.2 మౌంటు
The module has four mounting holes in its corners, allowing it to be securely fastened to a project enclosure or PCB using small screws (not included).
మూర్తి 6.4: Dimensions of the controller module, showing its compact size and the location of mounting holes.
7. ఆపరేటింగ్ సూచనలు
- పవర్ ఆన్: After ensuring all connections are correct and secure, apply power to the "Power+" and "Power-" terminals.
- వేగాన్ని సర్దుబాటు చేయండి: Use the connected external potentiometer to adjust the motor speed. Turning the potentiometer knob will vary the PWM duty cycle, thereby changing the average voltage supplied to the motor and controlling its speed.
- పవర్ ఆఫ్: To stop the motor and power down the module, disconnect the main DC power supply.
Note: This module does not include an on/off switch. Power control must be managed externally.
8. నిర్వహణ
- మాడ్యూల్ను శుభ్రంగా మరియు దుమ్ము మరియు చెత్త లేకుండా ఉంచండి.
- Periodically check all connections for tightness and ensure there are no loose wires.
- Avoid physical impact or excessive force on the module.
- If the resettable fuse trips due to overcurrent, disconnect power, identify and resolve the cause of the overcurrent, and allow the fuse to cool and reset before reapplying power.
9. ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| మోటారు నడవదు. | No power, incorrect wiring, faulty motor, potentiometer at minimum setting. | Check power supply, verify all connections, test motor independently, adjust potentiometer. |
| Motor runs at full speed regardless of potentiometer. | Potentiometer not connected correctly or faulty. | Ensure potentiometer is wired correctly (3 pins), test potentiometer. |
| Motor runs intermittently or stops. | Loose connections, overcurrent protection triggered, insufficient power supply. | Check all wiring, reduce motor load, ensure power supply can deliver sufficient current. Allow fuse to reset if tripped. |
| Module gets excessively hot. | Overload, short circuit, operating outside specifications. | Reduce motor load, check for short circuits, ensure input voltage and current are within limits. |
10. వారంటీ మరియు మద్దతు
DollaTek products are designed for reliability and performance. For specific warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support, please reach out to DollaTek customer service through their official webసైట్ లేదా మీ కొనుగోలు స్థానం.