Apricorn Aegis Secure Key 3 NXC 128GB USB 3.2 Type C Flash Drive Instruction Manual

1. ఉత్పత్తి ముగిసిందిview

The Apricorn Aegis Secure Key 3 NXC is a hardware-encrypted USB 3.2 Type C flash drive designed for secure data storage. It features an integrated keypad for PIN authentication, eliminating the need for software installation. This device is FIPS 140-2 Level 3 Validated, ensuring a high level of security for your data.

• FIPS 140-2 స్థాయి 3 ధృవీకరించబడింది: Meets stringent security standards.
• 256-Bit AES-XTS Hardware Encryption: All data is encrypted in real-time.
• USB 3.2 with Type C Connector: Provides fast data transfer and broad compatibility.
• Integrated Keypad: For PIN authentication without software.
• Separate Admin and User Modes: Allows for flexible access control.
• అంతర్గత బ్యాటరీ: Powers the keypad for initial setup and authentication.

Image: The Apricorn Aegis Secure Key 3 NXC flash drive, shown with its protective cap on the left and with the cap removed, revealing the keypad and USB-C connector, on the right.

2. సెటప్

2.1 ప్రారంభ ఛార్జింగ్

Before first use, ensure the internal battery is charged. Connect the Aegis Secure Key to a powered USB-C port. The device will charge automatically. A full charge is recommended for optimal performance.

2.2 Setting the Administrator PIN

The first step to using your Aegis Secure Key is to set an Administrator PIN. This PIN controls all device settings and access.

1. నొక్కండి లాక్ బటన్. ది లాక్ మరియు అన్‌లాక్ చేయండి LEDs will blink.
2. నొక్కండి లాక్ మళ్ళీ బటన్. ది లాక్ LED will glow solid red.
3. Enter a PIN of 7 to 16 digits.
4. నొక్కండి లాక్ బటన్. ది లాక్ LED will blink red.
5. Re-enter the same PIN.
6. నొక్కండి లాక్ బటన్. ది అన్‌లాక్ చేయండి LED will glow solid green, indicating the Admin PIN is set.

గమనిక: Remember your PIN. There is no backdoor or recovery method for forgotten PINs on hardware-encrypted devices.

చిత్రం: క్లోజప్ view of the Aegis Secure Key 3 NXC's integrated keypad, showing the numbered buttons and LED indicators.

3. ఆపరేటింగ్ సూచనలు

3.1 Unlocking the Drive

To access your data, the drive must be unlocked using the Administrator or User PIN.

1. Connect the Aegis Secure Key to a USB-C port on your computer or device.
2. ది లాక్ LED will glow solid red.
3. Enter your Administrator or User PIN.
4. నొక్కండి అన్‌లాక్ చేయండి బటన్. ది అన్‌లాక్ చేయండి LED will glow solid green, and the drive will be accessible.

Image: The Aegis Secure Key 3 NXC connected to the USB-C port of a laptop, ready for data access.

3.2 డేటా బదిలీ

Once unlocked, the Aegis Secure Key functions like a standard USB flash drive. You can drag and drop files, copy, paste, and delete data as needed. The drive is compatible with PC, Mac, and Linux operating systems.

3.3 Locking the Drive

To secure your data, always lock the drive when not in use.

• మాన్యువల్ లాక్: నొక్కండి లాక్ బటన్. ది లాక్ LED will glow solid red, indicating the drive is locked.
• ఆటోమేటిక్ లాక్: The drive will automatically lock after a period of inactivity (approximately 15 minutes) or when safely ejected from the host device.
• పవర్ ఆఫ్: Disconnecting the drive from the USB port will also automatically lock it.

ముఖ్యమైన: Always safely eject the drive from your operating system before physically removing it to prevent data corruption.

4. నిర్వహణ

4.1 బ్యాటరీ సంరక్షణ

The internal Lithium Polymer battery powers the keypad. To maintain battery health:

• Regularly connect the drive to a powered USB port to ensure the battery remains charged.
• బ్యాటరీ పనితీరును దిగజార్చే తీవ్రమైన ఉష్ణోగ్రతలను నివారించండి.

4.2 శారీరక సంరక్షణ

• Keep the protective cap on the USB-C connector when not in use to prevent dust and damage.
• Handle the device carefully to avoid physical impact to the keypad or casing.
• Ensure the USB-C connector is properly aligned when inserting it into a port to prevent damage.

4.3 డేటా బ్యాకప్

While the Aegis Secure Key provides robust security, it is good practice to regularly back up critical data to another secure location to prevent data loss from unforeseen circumstances.

5. ట్రబుల్షూటింగ్

• డ్రైవ్ గుర్తించబడలేదు:

  Ensure the drive is fully inserted into the USB-C port. Verify the drive is unlocked (green LED solid). Try a different USB-C port or computer. Ensure the internal battery has sufficient charge.

• "Disk Not Ejected Correctly" Warning:

  This warning may appear if the drive automatically locks due to inactivity or is physically removed without safe ejection. While generally harmless for this device, always attempt to safely eject the drive from your operating system before removal to prevent potential data issues.
• Keypad Unresponsive or Partially Working:

  Ensure the battery is charged. If issues persist, contact Apricorn support. Hardware keypad failures can prevent access to data.

• తరచుగా సంబంధాలు తెగిపోవడం:

  Check the USB-C cable and port for damage. Ensure the drive is firmly connected. If using a hub, try connecting directly to the computer. Ensure the drive's internal battery is adequately charged.

• Forgotten PIN:

  Due to the hardware encryption, there is no PIN recovery mechanism. If the Administrator PIN is forgotten, the drive will need to be reset, which will erase all data. User PINs can be reset by the Administrator.

6. స్పెసిఫికేషన్లు

7. వారంటీ మరియు మద్దతు

7.1 వారంటీ సమాచారం

For detailed warranty information regarding your Apricorn Aegis Secure Key 3 NXC, please refer to the official Apricorn website or the warranty card included with your product. Warranty terms and conditions may vary by region and purchase date.

7.2 సాంకేతిక మద్దతు

Should you encounter any issues not covered in this manual or require further assistance, please visit the official Apricorn support website for FAQs, drivers, firmware updates, and contact information for technical support.

Official Apricorn Webసైట్: www.apricorn.com

8. మీడియా వనరులు

ఈ మాన్యువల్‌లో పొందుపరచడానికి అధికారిక ఉత్పత్తి వీడియోలు ఏవీ అందుబాటులో లేవు.