EBTOOLS EBTOOLS5nrigk0scq

915Mhz USB UHF RFID Reader Instruction Manual

Model: EBTOOLS5nrigk0scq

పరిచయం

This manual provides comprehensive instructions for the setup, operation, and maintenance of your EBTOOLS 915Mhz USB UHF RFID Reader. Please read this manual carefully before using the device to ensure optimal performance and longevity.

The EBTOOLS 915Mhz USB UHF RFID Reader is a non-contact electronic tag access control device designed for efficient and sensitive RFID card reading and writing. It features a plug-and-play USB interface and wide compatibility with ISO18000-6C and ISO18000-6B standards.

కీ ఫీచర్లు

  • అధిక సున్నితత్వం: Non-contact card reading with a response speed of less than 0.2 seconds. Maximum reading distance up to 50cm.
  • Buzzer & LED Indicator Light: Built-in buzzer for audible alerts and a circular LED indicator light for visual status.
  • ప్లగ్ మరియు ప్లే: USB interface with approximately 1.4m wire length. No driver installation required for computer connection.
  • విస్తృత అనుకూలత: Built-in 2dBi circular polarized antenna. Output power range 12.5dBm-26dBm (software adjustable). Supports ISO18000-6C and ISO18000-6B standards.

ఉత్పత్తి ముగిసిందిview

టాప్ view of the 915Mhz USB UHF RFID Reader

మూర్తి 1: టాప్ view of the RFID Reader, showing the central reading area and "(HID) DESK READER" label.

వైపు view of the RFID Reader showing USB port and compatibility icons

మూర్తి 2: వైపు view of the RFID Reader, highlighting the USB port and icons for non-contact reading, plug and play, and sensitive card reading.

RFID Reader with a card being read, showing blue LED light

మూర్తి 3: RFID Reader in operation, demonstrating non-contact card reading with the blue LED indicator illuminated.

RFID Reader and its USB cable

మూర్తి 4: The RFID Reader unit alongside its integrated USB cable, ready for connection.

సెటప్ సూచనలు

  1. పరికరాన్ని అన్ప్యాక్ చేయండి: Carefully remove the RFID reader from its packaging.
  2. కంప్యూటర్‌కు కనెక్ట్ చేయండి: Locate an available USB port on your computer. Insert the USB connector of the RFID reader into the USB port. The device is designed for plug-and-play operation, so no additional driver installation is typically required.
  3. పవర్ ఆన్: The device will draw power directly from the USB port. The LED indicator light on the reader should illuminate, indicating it is powered on and ready for use.
  4. సాఫ్ట్‌వేర్ (ఐచ్ఛికం): While the device is plug-and-play for basic reading functions, specific applications or software may be required for advanced features like adjusting output power or managing data. Refer to your application's documentation for software requirements.

ఆపరేటింగ్ సూచనలు

RFID చదవడం Tags/Cards

To read an RFID tag or card:

  1. Ensure the RFID reader is connected to your computer and powered on (LED indicator is active).
  2. RFIDని ఉంచండి tag or card directly on or very close to the central reading area of the reader. The maximum reading distance is approximately 50cm (19.7 inches), but optimal performance is achieved when the tag is close to the reader.
  3. The reader will emit a short beep (from the built-in buzzer) and the LED indicator may change state (e.g., flash or change color) to confirm a successful read.
  4. The data from the RFID tag will be transmitted to your connected computer and processed by the relevant software application.

Writing RFID Tags/Cards (If Supported by Software)

The device supports writing to RFID tags. The maximum writing distance is approximately 0.2m (7.9 inches). The ability to write and the specific procedure will depend on the software application you are using. Consult your software's documentation for detailed writing instructions.

Diagram showing maximum reading and writing distances for the RFID reader

మూర్తి 5: Illustration of maximum reading (0.5m) and writing (0.2m) distances, which can vary based on transmission power, antenna type, label type, and environment.

నిర్వహణ

  • శుభ్రపరచడం: Use a soft, dry cloth to clean the surface of the reader. Do not use abrasive cleaners or solvents.
  • నిల్వ: పరికరాన్ని ప్రత్యక్ష సూర్యకాంతి మరియు తీవ్రమైన ఉష్ణోగ్రతలు లేకుండా చల్లని, పొడి ప్రదేశంలో నిల్వ చేయండి.
  • నిర్వహణ: పరికరాన్ని వదలడం లేదా బలమైన ప్రభావాలకు గురిచేయడం మానుకోండి.
  • కేబుల్ కేర్: USB కేబుల్‌ను ఎక్కువగా వంచవద్దు లేదా ముడతలు పెట్టవద్దు.

ట్రబుల్షూటింగ్

సమస్యసాధ్యమైన కారణంపరిష్కారం
Device not recognized by computer / No LED lightUSB కేబుల్ సరిగ్గా కనెక్ట్ కాలేదు లేదా USB పోర్ట్ తప్పుగా ఉంది.Ensure the USB cable is securely plugged into both the reader and the computer. Try a different USB port or a different computer if available.
చదవలేరు tags / Inconsistent readingTag not positioned correctly, tag type incompatibility, or environmental interference.నిర్ధారించండి tag is placed directly on the reading area. Verify the tag is compatible with ISO18000-6C or ISO18000-6B standards. Minimize interference from other electronic devices.
No software or instructions for useThe device is plug-and-play for basic functions, but specific applications require separate software.This product is a hardware device. For specific applications (e.g., inventory management, access control), you will need to integrate it with compatible third-party software. The manufacturer provides the hardware; software solutions are typically separate.
అన్నీ tags read under the same IDThis behavior is typically due to the software application interpreting the data, not the reader itself.Consult the documentation for your RFID software. Ensure it is configured to read unique tag identifiers. If using a simple text input application, it might only display a generic output.

స్పెసిఫికేషన్లు

గుణంవిలువ
బ్రాండ్EBTOOLS
మోడల్ సంఖ్యEBTOOLS5nrigk0scq
కనెక్టివిటీ టెక్నాలజీUSB
ప్రత్యేక ఫీచర్ప్లగ్ & ప్లే
రంగుడిఫాల్ట్
అనుకూల పరికరాలువ్యక్తిగత కంప్యూటర్
వస్తువు బరువు7.4 ఔన్సులు
Reading Distance (Max)0.5మీ / 19.7 ఇం
Writing Distance (Max)0.2మీ / 7.9 ఇం
యాంటెన్నాBuilt-in 2dBi Circularly Polarized Antenna
అవుట్పుట్ పవర్ రేంజ్12.5dBm-26dBm (Software Adjustable)
మద్దతు ఉన్న ప్రోటోకాల్‌లుISO18000-6C, ISO18000-6B

వారంటీ మరియు మద్దతు

EBTOOLS provides after-sales service for this product. If you have any questions or encounter issues with your 915Mhz USB UHF RFID Reader, please contact the seller or manufacturer directly. They are committed to replying within 24 hours to ensure your satisfaction.

For further assistance, you may refer to the official EBTOOLS store on Amazon: EBTOOLS Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.