LEXON LL128N Fingerprint Padlock User Manual

1. ఓవర్view

This manual provides detailed instructions for the LEXON LL128N Fingerprint Padlock. Please read this manual carefully before using the product to ensure proper operation and longevity. This biometric padlock offers secure, keyless access with advanced features for various applications.

2. ఉత్పత్తి లక్షణాలు

• బయోమెట్రిక్ వేలిముద్ర గుర్తింపు: Securely unlock with your fingerprint. Supports up to 10 registered users.
• మన్నికైన నిర్మాణం: Made from stainless steel and zinc alloy for enhanced security.
• వాతావరణ నిరోధకత: IP65 waterproof and dustproof rating, suitable for both indoor and outdoor use.
• దీర్ఘకాలం ఉండే బ్యాటరీ: Up to 3000 unlocks on a single charge. Offers a standby time of up to 12 months.
• USB-C ఛార్జింగ్: Conveniently rechargeable via a Type-C USB cable (included). Full charge in approximately 1.5 hours.
• సొగసైన డిజైన్: Designed by Guillaume Delvigne, available in multiple colors.

Image: The LEXON Nomaday Lock showcasing its design and available colors.

3. ప్యాకేజీ విషయాలు

• LEXON LL128N Fingerprint Padlock
• USB-C ఛార్జింగ్ కేబుల్
• వినియోగదారు మాన్యువల్

4. సెటప్

4.1 Initial Fingerprint Registration (Administrator)

Upon first use, the padlock is in default status, meaning any fingerprint can unlock it. You must register the first two fingerprints as administrators. These first two fingerprints are crucial for managing additional users and resetting the device.

1. Press and hold your finger on the fingerprint sensor until the నీలం కాంతి illuminates. Release your finger.
2. ది ఆకుపచ్చ కాంతి will illuminate. Place your finger on the sensor repeatedly from various angles until the green light turns off. This completes the registration of the first administrator fingerprint.
3. కాగా ది ఆకుపచ్చ కాంతి is still illuminated, use a different finger and repeat step 2. This registers the second administrator fingerprint.

After completing these 3 steps, the first two fingerprints are successfully set as administrators. The padlock will now only unlock with these registered fingerprints.

4.2 Registering Additional Fingerprints (Users 3-10)

To add more user fingerprints (up to a total of 10), an administrator fingerprint is required.

1. ఒక నొక్కండి మరియు పట్టుకోండి నిర్వాహకుడు వేలు on the sensor until the నీలం కాంతి illuminates. Release the finger.
2. ది ఆకుపచ్చ కాంతి will illuminate. Have the new user place their finger on the sensor repeatedly from various angles until the green light turns off. This registers the new user's fingerprint.

Repeat these steps for each additional user, up to a maximum of 10 fingerprints in total.

4.3 Deleting All Fingerprints (Factory Reset)

To delete all registered fingerprints and restore the padlock to its factory default state (any fingerprint can unlock), follow these steps:

1. Place an నిర్వాహకుడు వేలు on the sensor and hold it. The నీలం కాంతి will illuminate, then turn ఎరుపు. Continue holding.
2. After the red light illuminates, the ఆకుపచ్చ కాంతి will flash once. Release your finger immediately after the green light flashes.

All fingerprints are now deleted, and the lock is reset to its default state. Any fingerprint can now unlock the device until new administrator fingerprints are registered.