EBTOOLS Keyless Keypad Cabinet Lock User Manual

1. పరిచయం

This manual provides detailed instructions for the installation, operation, and maintenance of your EBTOOLS Keyless Keypad Cabinet Lock. This electronic lock offers dual unlock modes (keypad and physical key) and features a security alarm function for enhanced protection of your cabinets and drawers. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

2. ప్యాకేజీ విషయాలు

సంస్థాపనతో కొనసాగే ముందు అన్ని భాగాలు ప్యాకేజీలో ఉన్నాయని నిర్ధారించుకోండి.

• 1 x Keypad Cabinet Lock
• 1 x Mounting Accessory Pack (screws, plates, etc.)
• 1 x కీ
• 1 x వినియోగదారు మాన్యువల్

Image: The keypad cabinet lock shown with all its accompanying mounting hardware and key.

3. స్పెసిఫికేషన్లు

4. ఇన్స్టాలేషన్ గైడ్

Follow these steps to properly install your keypad cabinet lock.

4.1 Prepare the Installation Area

1. Measure the thickness of your cabinet or drawer board. Ensure it falls within the specified range (0.5-12mm for steel, 0.5-22mm for wood).
2. Mark the desired location for the lock on the cabinet door or drawer front.
3. Drill a hole with a diameter of approximately 19-23mm (0.7-0.9in) at the marked location. Refer to the dimension diagram for precise measurements.

Image: Technical drawing illustrating the lock's dimensions and necessary drilling specifications for installation.

4.2 Mount the Lock

1. Insert the main body of the keypad lock through the drilled hole from the outside of the cabinet/drawer.
2. From the inside, secure the lock using the provided mounting accessories (e.g., nut, washer, and screws). Ensure the lock is firmly attached and does not wobble.
3. Attach the latch plate to the cabinet frame, aligning it with the lock's bolt mechanism. Test the lock's movement to ensure smooth operation.

5. ఆపరేటింగ్ సూచనలు

This section details how to use your EBTOOLS Keypad Cabinet Lock.

5.1 Initial Setup: Setting the User Code

1. The lock comes with a default factory code (refer to the quick start guide or packaging for the default code, typically '1234').
2. To change the code, ensure the lock is in the unlocked position.
3. Press the 'C' button, then enter the current code, and then press 'OK'.
4. Press the 'C' button again, then enter your new desired code (1 to 12 digits), and then press 'OK'.
5. Repeat the new code and press 'OK' to confirm. A successful confirmation tone will sound.
6. Test the new code immediately to ensure it has been set correctly.

5.2 Unlocking with Keypad

1. Enter your programmed user code on the keypad.
2. Press the 'OK' button.
3. The lock will unlock, indicated by an audible tone and/or light. Turn the knob to open the cabinet/drawer.

5.3 ఫిజికల్ కీతో అన్‌లాక్ చేయడం

In case of forgotten code or battery depletion, the physical key can be used to unlock the cabinet.

1. Insert the provided key into the keyhole on the lock face.
2. Turn the key to unlock the mechanism.
3. Turn the knob to open the cabinet/drawer.

Image: A user interacting with the keypad of the lock, demonstrating typical operation.

5.4 Security Alarm Function

The lock is equipped with a security alarm. If an incorrect password is entered 3 consecutive times, the lock will activate an alarm for 60 seconds. To stop the alarm, enter the correct password.

6. నిర్వహణ

6.1 బ్యాటరీని ఛార్జ్ చేయడం

The lock features a built-in rechargeable battery. When the battery level is low, the lock will display a prompt (e.g., a specific light indicator or audible signal). From this point, the lock can typically be unlocked approximately 50 more times before complete power loss.

1. Locate the USB-C charging port on the side of the lock (visible in some product images).
2. Connect a standard USB-C charging cable (not included) to the port.
3. కేబుల్ యొక్క మరొక చివరను USB పవర్ సోర్స్‌కి కనెక్ట్ చేయండి (ఉదా., కంప్యూటర్, వాల్ అడాప్టర్).
4. ఛార్జింగ్ ఇండికేటర్ వెలుగుతుంది. పూర్తిగా ఛార్జ్ అయిన తర్వాత, ఇండికేటర్ మారుతుంది లేదా ఆపివేయబడుతుంది.

6.2 శుభ్రపరచడం

Wipe the lock's surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish or electronic components.

7. ట్రబుల్షూటింగ్

• లాక్ స్పందించడం లేదు: Check if the battery is charged. If the battery is completely depleted, use the physical key to open the lock and then charge the unit.
• Cannot set new code: Ensure the lock is in the unlocked state before attempting to change the code. Follow the code setting steps precisely. If issues persist, try resetting the lock (if a reset button is available, refer to specific product details; otherwise, allow battery to fully deplete and recharge).
• తరచుగా అలారం మోగుతుంది: This indicates multiple incorrect password attempts. Ensure you are entering the correct code. If others have access, verify they know the correct code.
• లాక్ యంత్రాంగం గట్టిగా ఉంటుంది: Ensure the installation is correct and the latch plate is properly aligned. Do not force the mechanism.

8. భద్రతా సమాచారం

• Keep the physical key in a safe and accessible location, separate from the lock, for emergency access.
• తీవ్రమైన ఉష్ణోగ్రతలు లేదా తేమకు లాక్‌ని బహిర్గతం చేయవద్దు.
• Avoid using excessive force on the keypad or lock mechanism.
• This lock is designed for cabinet and drawer security and is not intended for high-security applications where robust physical security is paramount.

9. వారంటీ మరియు మద్దతు

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official EBTOOLS webసైట్. కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదుని ఉంచండి.