JIARUIXIN JR1810RX 7-Pin Bluetooth Remote Control and Receiver Kit User Manual

1. పరిచయం

This manual provides instructions for the installation, operation, and maintenance of the JIARUIXIN JR1810RX 7-Pin Bluetooth Remote Control and Receiver Kit. This kit is designed as a replacement part for specific children's electric ride-on cars.

ప్యాకేజీ విషయాలు:

• 1 x JR1810RX Control Box (Receiver)
• 1 x 2.4G Bluetooth Remote Control

అనుకూలత తనిఖీ:

Before installation, ensure this control box is compatible with your electric ride-on car. Open your vehicle's existing control box and compare its appearance and pin configuration. This kit is specifically for models requiring a 7-పిన్ receiver. If your original control box is labeled JR1810RX or ZCY1810RX and has a 7-pin socket, this replacement part should be suitable.

This image displays two control boxes, labeled JR1810RX and ZCY1810RX, side-by-side, indicating they are interchangeable. Both show 'Remote Control Car Motor Controller' and 'Supply Voltage: DC 6V-12V'.

ఒక వివరణాత్మక view of the JR1810RX control box highlighting the 7-pin connector, essential for proper installation in children's electric cars.

This image illustrates the difference between the 7-pin and 5-pin versions of the JR1810RX control box, emphasizing the importance of selecting the correct pin configuration for your vehicle.

2. భద్రతా సమాచారం

Please read all safety warnings carefully before using this product to ensure safe operation and prevent injury.

• హెచ్చరిక! Not for children under 3 years. Small parts present a choking hazard.
• Load two AAA (1.5V) batteries into the remote control according to the diagram, ensuring correct polarity.
• పునర్వినియోగపరచలేని బ్యాటరీలు రీఛార్జ్ చేయబడవు.
• వివిధ రకాల బ్యాటరీలు లేదా కొత్త మరియు ఉపయోగించిన బ్యాటరీలను కలపకూడదు.
• బ్యాటరీలు సరైన ధ్రువణతతో చొప్పించబడాలి.
• అయిపోయిన బ్యాటరీలను బొమ్మ నుండి తీసివేయాలి.
• సరఫరా టెర్మినల్స్ షార్ట్ సర్క్యూట్ కాకూడదు.
• The packaging must be retained as it contains important information.

Important safety warnings are displayed, including a choking hazard notice for small parts, instructions for battery handling (non-rechargeable, correct polarity, no mixing old/new), and advice to retain packaging for important information.

3. సెటప్ మరియు జత చేయడం

3.1 రిమోట్ కంట్రోల్ బ్యాటరీ ఇన్‌స్టాలేషన్

1. రిమోట్ కంట్రోల్ వెనుక బ్యాటరీ కంపార్ట్‌మెంట్‌ను గుర్తించండి.
2. స్క్రూను విప్పుటకు మరియు బ్యాటరీ కవర్‌ను తెరవడానికి స్క్రూడ్రైవర్‌ని ఉపయోగించండి.
3. Insert two AAA (1.5V) batteries, ensuring correct polarity (+/-).
4. బ్యాటరీ కవర్ను మార్చండి మరియు స్క్రూను బిగించండి.

3.2 రిమోట్ కంట్రోల్‌ను రిసీవర్‌తో జత చేయడం

The remote control and receiver need to be paired for the first use or after replacing the remote control batteries.

1. Ensure the remote control is loaded with two AAA batteries.
2. Turn off the power switch on the electric vehicle.
3. On the remote control, hold down the "▲ ▲ తెలుగు" (Forward) and "▼" (Back) keys simultaneously for 3 seconds to initiate the match code process.
4. While still holding the keys, turn on the power switch on the vehicle.
5. The red indicator light on the remote control will stop flashing, indicating that the code matching is successful.

This image provides step-by-step instructions for installing AAA batteries into the remote control and pairing it with the receiver. It also details the functions of the remote's buttons: 'S' for speed, directional arrows for movement, and 'P' for brake.

4. ఆపరేటింగ్ సూచనలు

Once the remote control is paired, you can operate the electric vehicle using the following buttons:

ఒక ఓవర్ హెడ్ view of the remote control, showing the directional buttons (forward, back, left, right), speed selection (S), and brake (P) buttons.

• "S" Key (Speed Selection):
  • 1 LED lit: Low speed
  • 2 LEDs lit: Medium speed
  • 3 LEDs lit: High speed
• "▲" Key: Forward movement.
• "▼" Key: Backward movement.
• "◀" Key: Turn Left.
• "▶" Key: Turn Right.
• "P" Key: Hold to apply the brake. All indicator lights will flash when the brake is engaged.

5. ట్రబుల్షూటింగ్

If the remote control is not responding or the vehicle is not operating as expected, consider the following:

• No Response from Remote: Check if the remote control batteries are installed correctly and have sufficient charge. Replace if necessary.
• Vehicle Not Moving: Ensure the remote control is properly paired with the receiver. Follow the pairing instructions in Section 3.2.
• Intermittent Control: Verify that there are no strong interference sources nearby (e.g., other 2.4G devices). Ensure the remote control is within the effective operating range.
• తప్పు పిన్ కాన్ఫిగరేషన్: Double-check that you have the correct 7-pin receiver for your vehicle. A 5-pin receiver will not be compatible.

6. స్పెసిఫికేషన్లు

7. వారంటీ మరియు మద్దతు

For any questions, technical support, or warranty inquiries regarding your JIARUIXIN JR1810RX kit, please contact the seller or manufacturer directly through your purchase platform. Please retain your proof of purchase for warranty claims.