Replacement T-Joint Pins for Coleman Power Steel 18ft x 48in Pools

ఇన్స్ట్రక్షన్ మాన్యువల్: కోల్‌మన్/బెస్ట్‌వే పవర్ స్టీల్ డీలక్స్ రీప్లేస్‌మెంట్ టి-జాయింట్ పిన్స్

For Coleman Swim Vista and Bestway Power Steel Deluxe Above Ground Pools

1. ఉత్పత్తి ముగిసిందిview

This product provides a pack of six (6) replacement T-Joint pins designed for specific Coleman Swim Vista and Bestway Power Steel Deluxe above-ground swimming pools. These pins are essential components for maintaining the structural integrity of your pool's metal frame, ensuring secure connections at the T-joints. Each pin includes a gasket for a proper fit and seal.

Pack of six brown replacement T-joint pins for above-ground pools

Image 1: A pack of six brown replacement T-joint pins, showing their full length and design, ready for installation.

2. ఉత్పత్తి విషయాలు

3. అనుకూలత

These replacement pins are specifically designed for:

Please verify your pool's model and dimensions to ensure proper fitment before installation. The pins measure approximately 3 1/8 inches (7.94 cm) in length and 3/8 inches (0.95 cm) in width.

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

Follow these steps to replace a damaged or missing T-Joint pin:

  1. మొదటి భద్రత: Ensure the pool area is clear. If the pin to be replaced is under water, it may be necessary to partially drain the pool to access the T-joint safely and prevent water spillage.
  2. Identify the T-Joint: Locate the T-joint on the pool frame where the horizontal top rail connects to the vertical leg. The pin secures these two components.
  3. Remove Old Pin: Carefully push or pull out the old, damaged, or broken pin from the T-joint. If the pin is stuck, gently wiggle it while pulling. Avoid excessive force that could damage the pool frame.
  4. Prepare New Pin: Ensure the new replacement pin has its gasket properly seated around the base, just below the head of the pin. This gasket helps create a snug fit and prevents water ingress.
  5. Close-up of the T-joint pin showing the gasket

    చిత్రం 2: క్లోజప్ view of the pin's head and the integrated gasket, which ensures a secure and tight fit within the pool frame's T-joint.

  6. కొత్త పిన్‌ను చొప్పించండి: Align the new pin with the holes in the T-joint and the frame components. Gently push the pin through until it is fully seated and the gasket is flush against the joint. You may hear a slight click as it locks into place.
  7. Close-up of the slotted end of the T-joint pin

    చిత్రం 3: వివరణాత్మక view of the slotted end of the pin, designed for easy insertion and secure locking within the pool frame's T-joint.

  8. భద్రతను ధృవీకరించండి: Once inserted, gently tug on the connected frame parts to ensure the pin is securely in place and the joint is stable.

5. నిర్వహణ

To prolong the life of your pool frame and its components, including these pins:

6. ట్రబుల్షూటింగ్

7. స్పెసిఫికేషన్లు

గుణంవిలువ
ఉత్పత్తి కొలతలు3.18 x 0.38 x 0.38 inches (approx. 7.94 cm L x 0.95 cm W)
వస్తువు బరువు (ప్యాక్‌కు)4 ఔన్సులు (సుమారు 113 గ్రాములు)
పరిమాణం6 pins per pack
రంగుగోధుమ రంగు
తయారీదారుసాధారణమైనది
మూలం దేశంచైనా

8. వారంటీ మరియు మద్దతు

As this product is a replacement part from a generic manufacturer, specific warranty information may not be provided. For any issues or questions regarding the product, please refer to the seller or retailer from whom the purchase was made. Always ensure you are purchasing genuine or compatible replacement parts for your pool model.

సంబంధిత పత్రాలు - Replacement T-Joint Pins for Coleman Power Steel 18ft x 48in Pools

ముందుగాview Comprehensive Guide to Sewing Pins: Types, Anatomy, and Selection | Jo-Ann
Learn how to select the right sewing pins for your projects. This guide from Jo-Ann covers different pin types, their anatomy, specialty pins, and helpful accessories from brands like Dritz.
ముందుగాview Coleman Power Steel Rectangular Pools Owner's Manual
This manual provides essential safety instructions, assembly guidelines, and maintenance tips for Coleman Power Steel Rectangular Pools. Learn how to properly set up, use, and care for your pool to ensure safety and longevity.
ముందుగాview Adding and Editing Layout Pins in FlowPath: A Step-by-Step Guide
Learn how to add, edit, and manage layout pins within the FlowPath application. This guide provides detailed instructions for navigating settings, drawing shapes, associating pins with locations or projects, and deleting pins.
ముందుగాview Aura:fit సాఫ్ట్‌వేర్ ఇన్‌స్ట్రక్షన్ గైడ్ v4.0 - యూనిట్రాన్ హియరింగ్ ఎయిడ్ ఫిట్టింగ్
యూనిట్రాన్ వినికిడి పరికరాలను అమర్చడానికి Aura:fit సాఫ్ట్‌వేర్ వెర్షన్ 4.0ని ఉపయోగించడం, Vista Basic, Vista, Vista N, Vista T మరియు Vista D ఉత్పత్తి కుటుంబాల కోసం ప్రోగ్రామింగ్, కాన్ఫిగరేషన్, ఉపకరణాలు మరియు అధునాతన లక్షణాలను కవర్ చేయడం కోసం సమగ్ర గైడ్.
ముందుగాview కోల్‌మన్ పవర్ స్టీల్ పూల్స్ 90484E ఓనర్స్ మాన్యువల్
కోల్‌మన్ పవర్ స్టీల్ పూల్స్ మోడల్ 90484E కోసం సమగ్ర యజమాని మాన్యువల్, అసెంబ్లీ, ఇన్‌స్టాలేషన్, నిర్వహణ మరియు భద్రతా మార్గదర్శకాల కోసం వివరణాత్మక సూచనలను అందిస్తుంది. సురక్షితమైన మరియు ఆనందించే అనుభవాన్ని నిర్ధారించడానికి మీ పూల్‌ను ఎలా సరిగ్గా సెటప్ చేయాలో, ఉపయోగించాలో మరియు సంరక్షణ చేయాలో తెలుసుకోండి.
ముందుగాview బెస్ట్‌వే పవర్ స్టీల్ & స్టీల్ ప్రో మాక్స్ స్విమ్మింగ్ పూల్ యూజర్ మాన్యువల్ మరియు ఇన్‌స్టాలేషన్ గైడ్
మీ బెస్ట్‌వే పవర్ స్టీల్ లేదా స్టీల్ ప్రో మాక్స్ స్విమ్మింగ్ పూల్‌ను సెటప్ చేయడం, ఉపయోగించడం మరియు నిర్వహించడం కోసం సమగ్ర గైడ్. భద్రతా సూచనలు, అసెంబ్లీ దశలు, నీటి నాణ్యత పారామితులు మరియు నిల్వ చిట్కాలను కలిగి ఉంటుంది.