PowerSmart 42V 2A Charger for 36V Batteries User Manual

1. పరిచయం

This manual provides essential information for the safe and efficient use of your PowerSmart 42V 2A charger. This charger is specifically designed for 36V batteries equipped with a 5-pin SVD plastic connector, commonly found in Phylion and Joycube battery systems. Please read these instructions carefully before operating the charger to ensure proper function and to prevent damage or injury.

2. ముఖ్యమైన భద్రతా సూచనలు

• అన్ని సూచనలను చదవండి: ఛార్జర్‌ని ఉపయోగించే ముందు, బ్యాటరీని ఉపయోగించి ఛార్జర్, బ్యాటరీ మరియు ఉత్పత్తిపై అన్ని సూచనలను మరియు హెచ్చరిక గుర్తులను చదవండి.
• ఇండోర్ ఉపయోగం మాత్రమే: Do not expose the charger to rain or wet conditions. It is designed for indoor use only.
• సరైన వాల్యూమ్tage: Ensure the charger is connected to a power supply within the specified input voltage range (100V-240V AC).
• Correct connector: This charger is only compatible with 36V batteries that have a 5-pin plastic SVD connector. Do not attempt to use it with metal connectors or other pin configurations.
• షార్ట్ సర్క్యూట్‌లను నివారించండి: అవుట్‌పుట్ టెర్మినల్స్‌ను షార్ట్ సర్క్యూట్ చేయవద్దు.
• వెంటిలేషన్: Ensure adequate ventilation around the charger during operation. Do not cover the charger.
• ఉపయోగంలో లేనప్పుడు అన్‌ప్లగ్ చేయండి: Disconnect the charger from the power outlet when not in use or before cleaning.
• దెబ్బతిన్న భాగాలు: Do not operate the charger if it has been dropped, damaged, or if the cord or plug is damaged. Contact customer support for assistance.
• పిల్లలు మరియు పెంపుడు జంతువులు: ఛార్జర్‌ను పిల్లలు మరియు పెంపుడు జంతువులకు అందుబాటులో లేకుండా ఉంచండి.

3. ఉత్పత్తి లక్షణాలు

• అనుకూలత: Specifically designed for 36V batteries with a 5-pin plastic SVD connector.
• ఇన్పుట్ వాల్యూమ్tage: 100V-240V AC, 50/60Hz.
• అవుట్పుట్ వాల్యూమ్tage: 42 వి డిసి.
• అవుట్‌పుట్ కరెంట్: 2.0 ఎ.
• పవర్ అవుట్‌పుట్: 84W.
• కనెక్టర్ రకం: 5-pin circular plastic plug.
• LED సూచిక: Red for charging, Green for fully charged or disconnected.

4. Setup and Connector Verification

Before connecting the charger, it is crucial to verify that your battery's charging port is compatible with the 5-pin plastic SVD connector. This charger is not compatible with metal plugs or other pin configurations.

Image: Ensure your battery has a plastic 5-pin DC socket, not a metal one.

The charger features a 5-pin circular plastic connector. Please compare it carefully with your battery's charging port.

Image: PowerSmart 42V 2A charger with its 5-pin plastic connector.

This charger is specifically designed for Phylion and Joycube 36V batteries that utilize this specific 5-pin SVD plastic connector.

Image: Correct connection of the 5-pin charger plug.

గమనిక: This charger is not compatible with NEOMOUV brand bikes fitted with Greenway 36V batteries, nor can it replace chargers with model numbers SHC-8100LC, STC-8129LC, and LBC100201.

5. Operating Instructions (Charging Process)

1. బ్యాటరీకి కనెక్ట్ చేయండి: First, connect the 5-pin charger plug securely into the charging port of your 36V battery.
2. శక్తికి కనెక్ట్ చేయండి: Plug the charger's AC power cord into a standard 100V-240V wall outlet.
3. LED సూచికను పర్యవేక్షించండి:
   • A ఎరుపు LED light indicates that the battery is currently charging.
   • A ఆకుపచ్చ LED light indicates that the battery is fully charged or the charger is disconnected from the battery.
4. ఛార్జింగ్ సమయం: Charging time will vary depending on the battery's capacity and its current charge level.
5. డిస్‌కనెక్ట్: Once the LED indicator turns green, the battery is fully charged. Disconnect the charger from the wall outlet first, then disconnect the charger plug from the battery.

Important Note on Voltage: The charger's output voltage (42V) is intentionally higher than the battery's nominal voltage (36V). This is normal and necessary for a complete charge cycle. Do not be alarmed by this difference.

Image: Charger output voltage బ్యాటరీ వాల్యూమ్ కంటే ఎక్కువtage for full charge.

6. నిర్వహణ

• శుభ్రపరచడం: Disconnect the charger from the power supply and battery before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• నిల్వ: Store the charger in a cool, dry place when not in use. Avoid extreme temperatures and humidity.
• కేబుల్ కేర్: Do not pull the cable forcefully or wrap it too tightly around the charger. Inspect the cable and plug regularly for any signs of damage.

7. ట్రబుల్షూటింగ్

If the charger is not functioning as expected, please check the following:

• LED లైట్ లేదు:
  • ఛార్జర్ వర్కింగ్ వాల్ అవుట్‌లెట్‌లోకి సురక్షితంగా ప్లగ్ చేయబడిందని నిర్ధారించుకోండి.
  • Verify the battery is properly connected to the charger.
  • మరొక పరికరాన్ని ప్లగ్ చేయడం ద్వారా వాల్ అవుట్‌లెట్ పనిచేస్తుందో లేదో తనిఖీ చేయండి.
• LED remains green when connected to battery:
  • The battery may already be fully charged.
  • Ensure the battery's charging port and the charger's plug are clean and free of debris.
  • Confirm that the battery is a 36V battery with a 5-pin plastic SVD connector.
• Charger gets warm during use:
  • It is normal for the charger to become warm during operation. Ensure it has adequate ventilation and is not covered.
  • If the charger becomes excessively hot or emits smoke/unusual odors, immediately disconnect it from power and battery and cease use.

If these steps do not resolve the issue, please contact PowerSmart customer support.

8. స్పెసిఫికేషన్లు

Image: Charger label with detailed specifications.

9. వారంటీ మరియు మద్దతు

For warranty information or technical support, please refer to the documentation included with your purchase or contact PowerSmart customer service directly. Please have your product model number (42V 2A or SSLC084V42M-01) and purchase details available when contacting support.

Manufacturer: PowerSmart
Address: ID, 6F, Ren Road, Donggang Town, Xichen District, Wuxi City, Jiangsu P.R. China