iMaihom BDD130D-3

iMaihom 130W LED Flood Light (Model BDD130D-3) Instruction Manual

Dusk-to-Dawn Outdoor Lighting with 3 Adjustable Heads

ఉత్పత్తి ముగిసిందిview

The iMaihom 130W LED Flood Light (Model BDD130D-3) is designed for outdoor illumination, featuring a dusk-to-dawn photocell sensor and three adjustable light heads. This unit provides high brightness and is built for durability in various weather conditions.

  • అధిక ప్రకాశం: Equipped with 154 high-quality LED chips, producing up to 13000 lumens.
  • సంధ్యా నుండి తెల్లవారుజాము వరకు కార్యాచరణ: Built-in sensitive photocell sensor automatically turns the light on at nightfall and off at daybreak.
  • సర్దుబాటు చేయగల తలలు: Three light heads can be rotated to different angles, covering a wide lighting area up to 1850 sq. ft.
  • మన్నికైన నిర్మాణం: IP65 waterproof rating and full aluminum body ensure resistance to rain, sleet, snow, and efficient heat dissipation.

పెట్టెలో ఏముంది

ఇన్‌స్టాలేషన్ ప్రారంభించే ముందు అన్ని భాగాలు ఉన్నాయని నిర్ధారించుకోండి.

  • iMaihom 130W LED Flood Light Unit
  • Black Silicone Cap (for switch-controlled mode)
  • మౌంటింగ్ హార్డ్‌వేర్ (స్క్రూలు, యాంకర్లు, వైర్ నట్స్)

సెటప్ మరియు ఇన్‌స్టాలేషన్

This flood light is designed for hardwired installation to a junction box. Ensure power is turned off at the circuit breaker before beginning installation.

ఇన్‌స్టాలేషన్ దశలు:

  1. మౌంటు ఉపరితలాన్ని సిద్ధం చేయండి: Identify a suitable junction box location on a wall or under eaves/soffits. Ensure the junction box is waterproof for outdoor use.
  2. మౌంటు ప్లేట్‌ను అటాచ్ చేయండి: అందించిన స్క్రూలను ఉపయోగించి మౌంటు ప్లేట్‌ను జంక్షన్ బాక్స్‌కు భద్రపరచండి.
  3. వైర్ కనెక్షన్లు: Connect the flood light's wires to your household wiring:
    • Black wire (Live) to Black wire
    • White wire (Neutral) to White wire
    • Green/Yellow wire (Ground) to Green/Ground wire
    కనెక్షన్లను భద్రపరచడానికి అందించిన వైర్ నట్‌లను ఉపయోగించండి.
  4. లైట్ ఫిక్చర్‌ను మౌంట్ చేయండి: Align the flood light fixture with the mounting plate and secure it with the central screw.
  5. Seal the Fixture: Ensure the gasket is properly seated to maintain the IP65 waterproof rating.
  6. లైట్ హెడ్‌లను సర్దుబాటు చేయండి: Loosen the screws on the side of each light head to adjust their angle as needed. Tighten screws to secure the position.
  7. శక్తిని పునరుద్ధరించండి: సర్క్యూట్ బ్రేకర్ వద్ద పవర్ ఆన్ చేయండి.
Diagram showing hardwired installation steps for the iMaihom 130W LED Flood Light.

Figure 1: Hardwired Installation Steps. Shows the three steps for connecting the light to a junction box.

Image showing the iMaihom 130W LED Flood Light installed on an eave and a wall.

Figure 2: Eave and Wall Installation Examples. Demonstrates the versatility of mounting options.

Close-up of the iMaihom 130W LED Flood Light showing the adjustable heads and photocell sensor.

Figure 3: Adjustable Heads and Photocell. Illustrates the rotational capability of the light heads and the location of the photocell.

ఆపరేటింగ్ మోడ్‌లు

The iMaihom 130W LED Flood Light offers two operating modes:

1. Dusk-to-Dawn Mode (Default)

In this mode, the built-in photocell sensor automatically detects ambient light levels. The light will turn on when it gets dark (nightfall) and turn off when it gets bright (daybreak).

  • No manual intervention required.
  • Energy efficient operation.
Image demonstrating the dusk-to-dawn functionality of the iMaihom 130W LED Flood Light, showing it off during the day and on at night.

Figure 4: Dusk-to-Dawn Operation. The light automatically activates at dusk and deactivates at dawn.

2. Switch-Controlled Mode

To operate the light manually via a wall switch, cover the photocell sensor with the provided black silicone cap. This disables the automatic dusk-to-dawn function, allowing you to control the light with your existing wall switch.

  • Allows manual ON/OFF control.
  • Ideal for situations where continuous lighting is not desired or specific timing is needed.
Diagram showing how to use the black silicone cap to switch between dusk-to-dawn and switch-controlled modes, and how to address flickering issues.

Figure 5: Switching to Manual Control. Instructions for using the black silicone cap to enable switch-controlled operation.

నిర్వహణ

The iMaihom 130W LED Flood Light requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

  • శుభ్రపరచడం: Periodically clean the light heads and photocell sensor with a soft, damp cloth to remove dirt, dust, or debris. Do not use abrasive cleaners or solvents.
  • తనిఖీ: ఏవైనా అరిగిపోయిన, దెబ్బతిన్న లేదా వదులుగా ఉన్న కనెక్షన్ల సంకేతాల కోసం వైరింగ్ మరియు మౌంటును క్రమం తప్పకుండా తనిఖీ చేయండి. ఏవైనా సమస్యలను వెంటనే పరిష్కరించండి.
  • ఫోటోసెల్ అవరోధం: Ensure the photocell sensor is not obstructed by leaves, dirt, or other objects, as this can interfere with its automatic operation.

ట్రబుల్షూటింగ్

సమస్యసాధ్యమైన కారణంపరిష్కారం
రాత్రిపూట లైట్ వెలగదు.
  • పవర్ ఆఫ్ చేయబడింది.
  • Photocell sensor is obstructed or faulty.
  • వైరింగ్ సమస్య.
  • సర్క్యూట్ బ్రేకర్ మరియు వాల్ స్విచ్‌ను తనిఖీ చేయండి.
  • Clean the photocell sensor. Ensure no objects are blocking it.
  • Verify wiring connections are secure. Consult a qualified electrician if unsure.
పగటిపూట కాంతి వెలుగుతూనే ఉంటుంది.
  • Photocell sensor is obstructed or faulty.
  • Ambient light is insufficient.
  • Clean the photocell sensor. Ensure no objects are blocking it.
  • If using switch-controlled mode, ensure the black cap is properly installed.
కాంతి మినుకుమినుకుమంటుంది.
  • వదులుగా ఉండే వైరింగ్ కనెక్షన్.
  • Photocell sensor interference.
  • అన్ని వైరింగ్ కనెక్షన్లను తనిఖీ చేసి బిగించండి.
  • Ensure the photocell sensor is not receiving intermittent light (e.g., from another light source or reflective surface). If flickering persists in switch-controlled mode, ensure the black cap is fully covering the sensor.

స్పెసిఫికేషన్లు

ఫీచర్వివరాలు
బ్రాండ్iMaihom
మోడల్ సంఖ్యBDD130D-3
వాట్tage130 వాట్స్
ప్రకాశం13000 ల్యూమెన్స్
లేత రంగుడేలైట్ వైట్ (6500K)
వాల్యూమ్tage120 వోల్ట్‌లు (AC)
మెటీరియల్అల్యూమినియం
నీటి నిరోధక స్థాయిIP65 జలనిరోధిత
నియంత్రణ పద్ధతిPhotocell (Dusk-to-Dawn) / Switch
మౌంటు రకంWall Mount, Eave Mount, Soffit Mount, Pole Mount
అంశం కొలతలు (L x W x H)15.78"లీ x 6.18"వా x 4.64"హ
వస్తువు బరువు2.4 పౌండ్లు

వారంటీ మరియు మద్దతు

The iMaihom 130W LED Flood Light (Model BDD130D-3) comes with a 2 సంవత్సరాల వారంటీ from the manufacturer. For technical support, warranty claims, or further assistance, please contact iMaihom customer service through their official webఉత్పత్తిని కొనుగోలు చేసిన సైట్ లేదా రిటైలర్.

For more information about iMaihom products, visit the iMaihom Store on Amazon.

ఉత్పత్తి వీడియోలు

iMaihom 100W LED Dusk to Dawn Security Light - Overview

ఈ వీడియో ఓవర్‌ని అందిస్తుందిview of the iMaihom 100W LED Dusk to Dawn Security Light, highlighting its features and benefits. Note: This video refers to a 100W model, but the features are generally applicable to the 130W model.

© 2026 iMaihom. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.