tectake Bar Table with 4 Stools - Industrial Style

పరిచయం

Thank you for choosing the tectake Industrial Style Bar Table with 4 Stools. This manual provides important information for the safe assembly, operation, and maintenance of your new furniture set. Please read these instructions carefully before assembly and keep them for future reference.

భద్రతా సూచనలు

• Ensure all components are present and undamaged before assembly. Do not use if any parts are missing or damaged.
• గీతలు పడకుండా ఉండటానికి మృదువైన, శుభ్రమైన ఉపరితలంపై ఉత్పత్తిని సమీకరించండి.
• Tighten all screws and bolts securely, but do not overtighten to avoid damaging the material.
• అన్ని కనెక్షన్లు బిగుతుగా ఉండేలా క్రమం తప్పకుండా తనిఖీ చేయండి.
• Do not exceed the maximum load capacity for the table (75 kg) and stools (150 kg per stool).
• ఉక్కిరిబిక్కిరి అయ్యే ప్రమాదాలను నివారించడానికి చిన్న భాగాలు మరియు ప్యాకేజింగ్ పదార్థాలను పిల్లలకు దూరంగా ఉంచండి.
• This product is designed for indoor use. Avoid prolonged exposure to moisture or direct sunlight.

ప్యాకేజీ విషయాలు

Before starting assembly, please verify that all the following components are included in your package:

• 1 x బార్ టేబుల్
• 4 x బార్ స్టూల్స్
• 1 x Set of Assembly Hardware (screws, bolts, Allen key, etc.)
• 1 x అసెంబ్లీ మాన్యువల్ (ఈ పత్రం)

Image: Detailed diagram of product dimensions and included components.

అసెంబ్లీ సూచనలు

Follow these steps carefully to assemble your tectake bar table and stools. It is recommended to have two people for assembly.

1. భాగాలను అన్‌ప్యాక్ చేయండి: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to avoid scratches. Identify each component using the parts list in the assembly hardware set.
2. టేబుల్ ఫ్రేమ్‌ను అసెంబుల్ చేయండి: Attach the table legs to the long and short crossbars using the provided screws and Allen key. Ensure all connections are finger-tight before fully tightening.
3. టేబుల్‌టాప్‌ను అటాచ్ చేయండి: Place the tabletop upside down on a soft surface. Align the assembled table frame with the pre-drilled holes on the underside of the tabletop. Secure the tabletop to the frame using the appropriate screws.
4. స్టూల్ ఫ్రేమ్‌లను అసెంబుల్ చేయండి: For each stool, attach the four legs to the seat frame using the provided screws. Ensure the footrests are correctly oriented.
5. Attach Stool Seats: Place each stool seat upside down. Align the assembled stool frame with the pre-drilled holes on the underside of the seat. Secure the seat to the frame.
6. సర్దుబాటు చేయగల పాదాలను అమర్చండి: Screw the adjustable plastic feet into the bottom of each table leg and stool leg. These feet protect your floor and allow for minor height adjustments to ensure stability.
7. తుది బిగింపు: Once all components are assembled, carefully place the table and stools upright. Systematically tighten all screws and bolts using the Allen key. Do not overtighten.

Image: Stable feet with screw-in adjusters and resistant MDF tabletops.

Image: Features including adjustable feet and space-saving stool storage.

ఆపరేటింగ్ సూచనలు

The tectake bar table and stools are designed for daily use in your home. Here are some guidelines for optimal use:

• స్థిరత్వం: Use the adjustable plastic feet on both the table and stools to compensate for uneven floors. Turn the feet clockwise or counter-clockwise until the furniture is stable and does not wobble.
• స్థలం ఆదా: The stools are designed to fit neatly under the table when not in use, maximizing your floor space.
• లోడ్ సామర్థ్యం: Do not place items heavier than 75 kg on the table. Each stool can support a maximum weight of 150 kg.
• ప్లేస్‌మెంట్: Position the furniture on a flat, stable surface. Avoid placing it near heat sources or in direct sunlight for extended periods to prevent material damage.

Image: tectake bar table and stools in use.

నిర్వహణ

Proper care will extend the life and appearance of your tectake furniture set:

• శుభ్రపరచడం: Wipe surfaces with a dry cloth. For more stubborn marks, use a slightly damp cloth and mild detergent, then dry immediately with a clean, dry cloth. Avoid abrasive cleaners or harsh chemicals.
• సాధారణ తనిఖీలు: అన్ని స్క్రూలు మరియు బోల్ట్‌లు బిగుతుగా ఉన్నాయని నిర్ధారించుకోవడానికి వాటిని కాలానుగుణంగా తనిఖీ చేయండి. అవసరమైతే తిరిగి బిగించండి.
• రక్షణ: Use coasters or placemats to protect the tabletop from spills, heat, and scratches.
• పర్యావరణం: Keep the furniture in a dry environment. Avoid extreme temperature changes and high humidity.

ట్రబుల్షూటింగ్

If you encounter any issues with your tectake bar table and stools, please refer to the following common solutions:

• Wobbling Table/Stool:
  • Check if all screws and bolts are securely tightened.
  • Adjust the plastic feet on the bottom of the legs to level the furniture on uneven surfaces.
• అసెంబ్లీ సమయంలో ఇబ్బంది:
  • Ensure you are using the correct hardware for each step as indicated in the assembly instructions.
  • అన్ని భాగాలు వదులుగా బిగించే వరకు స్క్రూలను ఎక్కువగా బిగించవద్దు, తరువాత వాటిని క్రమంగా బిగించండి.
  • Refer to the assembly diagrams for correct orientation of parts.
• గీతలు లేదా డెంట్లు:
  • Minor scratches on the MDF surface can sometimes be minimized with furniture polish or a touch-up pen matching the wood finish.
  • Prevent future damage by using protective pads under items placed on the table.

స్పెసిఫికేషన్లు

వారంటీ మరియు మద్దతు

tectake products are manufactured to high-quality standards. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.

For technical support, missing parts, or any questions regarding your product, please contact tectake customer service through their official website or the retailer where you purchased the product. Please have your model number (404306) and purchase date ready when contacting support.

You can visit the tectake store for more information: tectake Official Store