జెఇజిఎస్ 81603

JEGS 81603 Portable Parts Washer Cart Instruction Manual

మోడల్: 81603

ముఖ్యమైన భద్రతా సమాచారం

Please read and understand all safety warnings and instructions before operating the JEGS 81603 Portable Parts Washer Cart. Failure to follow these instructions may result in serious injury or property damage.

  • Use only non-flammable, water-based degreasers or cleaning agents. Never use flammable solvents, gasoline, or other combustible liquids.
  • Fill the tank to just below the level of the parts tray to prevent overflow and ensure proper pump operation.
  • The lid is equipped with a fire protection fusible link that automatically closes in case of fire. Ensure the lid can close freely.
  • Always wear appropriate personal protective equipment, including safety glasses and chemical-resistant gloves, when operating the parts washer.
  • Ensure the unit is plugged into a properly grounded 110/120V outlet.
  • Keep the work area well-ventilated.
  • ఆపరేషన్‌లో ఉన్నప్పుడు యూనిట్‌ను గమనించకుండా వదిలివేయవద్దు.
  • Keep children and unauthorized personnel away from the parts washer during use.

ఉత్పత్తి ముగిసిందిview

The JEGS 81603 Portable Parts Washer Cart is designed for efficient and convenient cleaning of automotive parts and tools. Its mobile design allows for easy maneuverability in your garage or shop.

JEGS 81603 Portable Parts Washer Cart, front view మూత తెరిచి

ముందు view of the JEGS 81603 Portable Parts Washer Cart with the lid open, showing the internal components and flexible nozzle.

ముఖ్య లక్షణాలు:

  • Large 20-gallon tank capacity with a 12-gallon solvent working capacity.
  • High-flow pump with a flexible wash nozzle for targeted cleaning.
  • Smooth-rolling 4-inch polyurethane casters (two locking, two non-locking) for easy mobility.
  • Convenient storage shelf to keep parts organized.
  • Drying shelf with a drain hole and a removable plastic drain pan.
  • Constructed from heavy-duty 20-gauge steel with a yellow powder-coat finish for corrosion resistance.
  • Integrated washer tank drain plug for easy fluid changes.
Parts washer tank showing internal tray in place and removed

పై నుండి క్రిందికి view of the parts washer tank, illustrating the removable parts tray both in place and removed.

సెటప్ మరియు అసెంబ్లీ

The JEGS 81603 Parts Washer Cart requires some assembly before first use. Refer to the detailed assembly instructions included in your product packaging for step-by-step guidance. Key steps typically include:

  1. Attach the casters to the base of the cart. Ensure locking casters are placed in desired positions.
  2. Assemble the cart frame and shelves according to the diagrams.
  3. Secure the parts washer tank onto the top of the cart frame.
  4. Connect the pump and flexible nozzle to the tank.
  5. Ensure all connections are secure and the power cord is properly routed.
వైపు view of parts washer cart showing power cord and on/off switch

వైపు view of the parts washer cart, highlighting the power cord and the easily accessible on/off switch for the pump.

ఆపరేటింగ్ సూచనలు

1. ట్యాంక్ నింపడం

  • Ensure the unit is on a level surface and the drain plug is securely closed.
  • Pour approximately 12 gallons of a non-flammable, water-based degreaser or cleaning agent into the tank.
  • Do not overfill; the liquid level should be just below the parts tray to prevent splashing and ensure efficient pump operation.

2. Cleaning Parts

  • Place the parts to be cleaned onto the parts tray inside the tank.
  • Plug the parts washer into a 110/120V electrical outlet.
  • Turn on the pump using the power switch located on the side of the unit.
  • Direct the flexible wash nozzle towards the parts to spray the cleaning solution.
  • Use a brush (not included) to scrub stubborn grime while the solution is flowing.
  • Once cleaned, allow excess fluid to drain back into the tank. You can place parts on the drying shelf for further draining.
  • Turn off the pump when finished.
Close-up of flexible wash nozzle and pump filter inside the parts washer

క్లోజ్-అప్ view of the flexible wash nozzle and the pump's filtration system within the parts washer tank.

నిర్వహణ

Regular maintenance ensures the longevity and optimal performance of your parts washer.

1. ట్యాంక్ నుండి నీటిని తీసివేయడం

  • When the cleaning solution becomes excessively dirty or needs replacement, drain the tank.
  • Place a suitable container (e.g., a bucket) beneath the drain plug located at the bottom of the tank.
  • Unscrew the drain plug to allow the fluid to empty.
  • Dispose of used cleaning solution according to local environmental regulations.
  • Once drained, securely re-install the drain plug.
Close-up of the washer tank drain plug

క్లోజ్-అప్ view of the washer tank drain plug, located at the bottom of the main tank for easy fluid removal.

2. యూనిట్ శుభ్రపరచడం

  • Regularly clean the parts tray and the interior of the tank to remove sludge and debris.
  • The drying shelf features a removable plastic drain pan for easy cleaning. Remove the pan, empty any collected fluid, and wash it as needed.
  • Inspect the pump filter periodically and clean it to ensure unrestricted flow of the cleaning solution.
  • Wipe down the exterior of the cart with a damp cloth to maintain its yellow powder-coat finish.
Drying shelf with drain hole and removable drain pan

The drying shelf, showing its integrated drain hole and the removable plastic drain pan for convenient collection of excess fluid.

ట్రబుల్షూటింగ్

If you encounter issues with your parts washer, refer to the following common troubleshooting tips:

  • Pump not operating: Check if the unit is properly plugged into a live 110/120V outlet. Ensure the power switch is in the 'ON' position. Verify that the pump filter is not clogged.
  • Low fluid flow: Check the fluid level in the tank; ensure it is sufficient for the pump to operate. Inspect the pump filter and flexible nozzle for any blockages.
  • అతిగా చిలకరించడం: Ensure the tank is not overfilled. The fluid level should be just below the parts tray.
  • మూత సరిగ్గా మూయకపోవడం: Check for any obstructions around the lid hinges or the fusible link mechanism.

For persistent issues, contact JEGS customer support.

సాంకేతిక లక్షణాలు

స్పెసిఫికేషన్వివరాలు
మోడల్ సంఖ్య81603
ట్యాంక్ సామర్థ్యం20 గ్యాలన్లు
Solvent Working Capacity12 గ్యాలన్లు
వాల్యూమ్tage110V/60HZ
పంప్ అవుట్‌పుట్317 gph
అసెంబుల్డ్ కొలతలు (L x W x H)38 in. x 21 1/2 in. x 37 in.
Tank Size (L x W x H)28 అంగుళాలు x 19 అంగుళాలు x 8 1/2 అంగుళాలు.
కాస్టర్లు(4) 4 in. diameter (2 locking, 2 non-locking)
మెటీరియల్Heavy-duty 20-gauge steel, Polyurethane
రంగుపసుపు
వస్తువు బరువు71.5 lbs (product description) / 80 lbs (specifications)
ప్రత్యేక ఫీచర్పోర్టబుల్

వారంటీ మరియు కస్టమర్ మద్దతు

JEGS is committed to providing quality products and support.

  • రిటర్న్స్: ఈ ఉత్పత్తి 30 రోజుల సులభమైన రిటర్న్‌లకు అర్హత కలిగి ఉంది. వివరాల కోసం దయచేసి రిటైలర్ రిటర్న్ పాలసీని చూడండి.
  • కస్టమర్ మద్దతు: For any questions, technical assistance, or warranty claims, please contact JEGS customer support directly. You can visit the అమెజాన్‌లో JEGS స్టోర్ లేదా మీ ఉత్పత్తి ప్యాకేజింగ్‌లో అందించిన సంప్రదింపు సమాచారాన్ని చూడండి.

సంబంధిత పత్రాలు - 81603

ముందుగాview JEGS 86004 5250W పోర్టబుల్ జనరేటర్ యూజర్ గైడ్
JEGS 86004 పోర్టబుల్ జనరేటర్ కోసం యూజర్ గైడ్. 5250 వాట్ పవర్ యూనిట్ కోసం అసెంబ్లీ, ఆపరేషన్, భద్రత, నిర్వహణ మరియు ట్రబుల్షూటింగ్‌ను కవర్ చేస్తుంది.
ముందుగాview JEGS 555-630101 Disc Brake Kit Installation Instructions for Impala, Bel Air, Biscayne
Comprehensive installation guide for the JEGS 555-630101 Disc Brake Kit, designed for Chevrolet Impala, Bel Air, and Biscayne models. Includes parts list, tools required, step-by-step instructions, and troubleshooting tips for upgrading your vehicle's braking system.
ముందుగాview షిఫ్ట్ లైట్ ఇన్‌స్టాలేషన్ గైడ్‌తో JEGS 5 అంగుళాల టాకోమీటర్
షిఫ్ట్ లైట్‌తో కూడిన JEGS 5-అంగుళాల టాకోమీటర్ కోసం ఇన్‌స్టాలేషన్ గైడ్, వైరింగ్, సిగ్నల్ హుక్అప్, క్రమాంకనం మరియు ఆటోమోటివ్ ఉపయోగం కోసం ట్రబుల్షూటింగ్‌ను కవర్ చేస్తుంది. మోడల్ నంబర్లు 555-41260 నుండి 555-41265 వరకు ఉన్నాయి.
ముందుగాview JEGS HEI స్ట్రీట్ స్పార్క్ డిస్ట్రిబ్యూటర్ అసెంబ్లీ ఇన్‌స్టాలేషన్ సూచనలు (555-40005)
Detailed installation guide for the JEGS HEI Street Spark Distributor Assembly, part number 555-40005. Learn how to remove your old distributor, install the new JEGS unit, connect wiring, and set ignition timing for optimal performance.
ముందుగాview JEGS ఎలక్ట్రిక్ వాక్యూమ్ పంప్ 555-63019 ఇన్‌స్టాలేషన్ గైడ్
JEGS ఎలక్ట్రిక్ వాక్యూమ్ పంప్ (మోడల్ 555-63019) కోసం ఇన్‌స్టాలేషన్ గైడ్. ఆటోమోటివ్ ఉపయోగం కోసం సరైన మౌంటు, వైరింగ్, భద్రతా జాగ్రత్తలు మరియు కార్యాచరణ గమనికలపై సూచనలను అందిస్తుంది.
ముందుగాview JEGS Retrofit Oil Pan Installation Guide for GM LS-Engines (Models 555-50237, 555-50239, 555-50275, 555-50277)
Comprehensive installation guide from JEGS for their retrofit oil pan kit designed for GM LS-engines. Includes parts list, disassembly steps, important notes, and detailed installation procedures with torque specifications.