Clatoon Handheld Digital Anemometer (Model GM816) User Manual

1. పరిచయం

The Clatoon Handheld Digital Anemometer is a compact and lightweight device designed for accurately measuring wind speed and temperature. It is suitable for a variety of applications, including outdoor activities like kite flying, drone operation, sailing, and hang gliding, as well as industrial uses such as HVAC duct airflow testing and fan manufacturing. This manual provides essential information for proper use, setup, operation, and maintenance of your anemometer.

2. భద్రతా సమాచారం

• పరికరాన్ని ఆపరేట్ చేసే ముందు ఈ మాన్యువల్‌ని పూర్తిగా చదవండి.
• Do not attempt to disassemble or modify the anemometer, as this may void the warranty and cause damage.
• Keep the device away from water and extreme temperatures to prevent malfunction.
• Ensure proper battery installation to avoid damage to the device.
• Store the device in a safe place when not in use, preferably in its protective case.

3. ప్యాకేజీ విషయాలు

మీ ప్యాకేజీలో అన్ని అంశాలు ఉన్నాయని ధృవీకరించండి:

• 1 × Handheld Digital Anemometer (includes 3V CR2032 battery)
• 1 × Protective Cover (Yellow)
• 1 × వినియోగదారు మాన్యువల్
• 1 × లాన్యార్డ్

4. ఉత్పత్తి ముగిసిందిview

The Clatoon Handheld Digital Anemometer features a compact design with a 6-blade fan for accurate measurements. It includes an LCD backlit screen for clear readings in various lighting conditions.

బటన్లు మరియు ప్రదర్శన:

• మోడ్ బటన్: Used to power on the device, cycle through measurement units (m/s, km/h, ft/min, mph, knots), and select measurement modes (MAX/AVG/Current).
• సెట్ బటన్: Used to confirm selections and power off the device.
• °C/°F బటన్: సెల్సియస్ మరియు ఫారెన్‌హీట్ ఉష్ణోగ్రత యూనిట్ల మధ్య టోగుల్ చేస్తుంది.
• LCD డిస్ప్లే: Shows wind speed, temperature, battery level, and selected units/modes.

5. సెటప్

5.1. బ్యాటరీ ఇన్‌స్టాలేషన్

The anemometer requires one 3V CR2032 battery (included). Follow these steps for installation:

1. Remove the yellow protective silicone case from the anemometer.
2. పరికరం వెనుక బ్యాటరీ కంపార్ట్‌మెంట్‌ను గుర్తించండి.
3. Use a coin, screwdriver, or hard plastic sheet to rotate and open the battery compartment lid according to the indicated directions (OPEN/CLOSE).
4. Insert the CR2032 battery, ensuring the "+" side is facing outwards.
5. Close the battery compartment lid by rotating it back into place.
6. Replace the yellow protective case.

5.2. లాన్యార్డ్‌ను అటాచ్ చేయడం

To attach the lanyard, thread the thin loop of the lanyard through the designated slot at the bottom of the anemometer. Then, pass the larger part of the lanyard through the loop you just created and pull to secure it. This helps prevent accidental drops and makes the device easier to carry.

6. ఆపరేటింగ్ సూచనలు

6.1. పవర్ ఆన్/ఆఫ్

• పవర్ ఆన్: Briefly press the "MODE" button to turn on the device. The LCD display will illuminate.
• పవర్ ఆఫ్: Long press the "SET" button to turn off the device. The anemometer also features an auto power-off function after 14 minutes of inactivity to save battery.

6.2. కొలత యూనిట్లను ఎంచుకోవడం

After powering on, you can change the wind speed measurement unit:

• Long press the "MODE" button until the current unit (e.g., "m/s") starts to blink.
• Briefly press the "MODE" button repeatedly to cycle through the available units: m/s, km/h, ft/min, mph, knots.
• Press the "SET" button to confirm your desired unit.

6.3. ఉష్ణోగ్రత యూనిట్లను మార్చడం (°C/°F)

సెల్సియస్ మరియు ఫారెన్‌హీట్ మధ్య మారడానికి:

• Briefly press the "°C/°F" button located on the device. The display will instantly switch between the two temperature scales.

6.4. Measurement Modes (MAX/AVG/Current)

The anemometer can display current, maximum, and average wind speeds:

• Briefly press the "SET" button to cycle through the measurement modes: Current, MAX (maximum wind speed recorded since power-on), and AVG (average wind speed recorded since power-on).

6.5. బ్యాక్‌లైట్ డిస్ప్లే

The LCD screen has a backlight for improved visibility in low-light conditions. The backlight activates automatically when any button is pressed and will turn off after a short period of inactivity to conserve battery.

6.6 అప్లికేషన్లు

7. స్పెసిఫికేషన్లు

8. నిర్వహణ

• శుభ్రపరచడం: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents. Ensure the fan blades are free from dust and debris for accurate readings.
• నిల్వ: When not in use for extended periods, remove the battery to prevent leakage. Store the anemometer in its protective case in a cool, dry place.
• బ్యాటరీ భర్తీ: Replace the CR2032 battery when the low battery indicator appears on the display. Follow the battery installation steps in Section 5.1.

9. ట్రబుల్షూటింగ్

10. వారంటీ మరియు మద్దతు

Specific warranty details are not provided in the product information. For warranty claims, technical support, or any inquiries regarding your Clatoon Handheld Digital Anemometer, please refer to the contact information provided with your purchase or visit the official Clatoon webసైట్.