SAMCON SBE-C-1 DC LED Light with Switch User Manual

పరిచయం

Thank you for choosing the SAMCON SBE-C-1 DC LED Light with Switch. This energy-efficient LED light is designed for various DC applications, providing bright and reliable illumination. Please read this manual carefully before installation and operation to ensure safe and optimal performance.

ముఖ్యమైన భద్రతా సూచనలు

• ఇన్‌స్టాలేషన్ లేదా సర్వీసింగ్‌కు ముందు పవర్ డిస్కనెక్ట్ చేయండి.
• This product is designed for DC (Direct Current) power sources only. Ensure the power supply matches the product's voltagఇ అవసరాలు.
• Do not expose the light to excessive moisture or extreme temperatures.
• Handle the LED board with care to avoid damage to components.
• Ensure proper polarity when connecting wires (red for positive, black for negative). Incorrect polarity can damage the device.
• Installation should be performed by a qualified individual if you are unsure.

ప్యాకేజీ విషయాలు

• 1 x SAMCON SBE-C-1 DC LED Light with Switch

ఉత్పత్తి ముగిసిందిview

The SAMCON SBE-C-1 is a compact and energy-efficient DC LED light featuring an integrated switch for convenient operation. It consists of an LED board with multiple LED chips, a control component, and pre-attached power wires.

మూర్తి 1: ముందు view of the SAMCON SBE-C-1 DC LED Light board, displaying the array of LED chips, the SAMCON brand name, model number SBE-C-1, and the attached red (positive) and black (negative) power wires.

మూర్తి 2: వెనుకకు view of the SAMCON SBE-C-1 DC LED Light board, revealing a metallic heat sink plate designed for thermal management, with two visible screw holes for mounting.

ఇన్స్టాలేషన్ సూచనలు

1. మౌంటు ఉపరితలాన్ని సిద్ధం చేయండి: Choose a suitable, flat surface for mounting the LED light. Ensure the surface can support the light and is free from obstructions.
2. LED లైట్‌ను సురక్షితంగా ఉంచండి: Use appropriate screws (not included) to secure the LED board to the chosen surface through the mounting holes. Refer to Figure 2 for the location of mounting holes on the back plate.
3. పవర్ కనెక్ట్ చేయండి:
   • Identify the positive (+) and negative (-) terminals of your DC power source.
   • కనెక్ట్ చేయండి ఎరుపు తీగ from the LED light to the పాజిటివ్ (+) టెర్మినల్ of your DC power source.
   • కనెక్ట్ చేయండి నల్ల వైర్ from the LED light to the ప్రతికూల (-) టెర్మినల్ of your DC power source.
   • Warning: Ensure correct polarity to prevent damage to the LED light.
4. కనెక్షన్‌లను ధృవీకరించండి: అన్ని కనెక్షన్లు సురక్షితంగా మరియు సరిగ్గా ధ్రువీకరించబడ్డాయని నిర్ధారించుకోవడానికి వాటిని ఒకటికి రెండుసార్లు తనిఖీ చేయండి.

ఆపరేటింగ్ సూచనలు

1. పవర్ ఆన్: Once the LED light is securely installed and correctly wired to a compatible DC power source, apply power to the circuit.
2. Use the Switch: The SAMCON SBE-C-1 features an integrated push-button switch. Press the switch to turn the LED light ON. Press it again to turn the LED light OFF.

నిర్వహణ

• శుభ్రపరచడం: Gently wipe the LED light with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
• తనిఖీ: Periodically check the wiring for any signs of wear or damage. Ensure mounting screws remain tight.
• వేడి నిర్వహణ: Ensure adequate airflow around the back of the LED board (heat sink) to prevent overheating, especially during prolonged use.

ట్రబుల్షూటింగ్

స్పెసిఫికేషన్లు

వారంటీ మరియు మద్దతు

For warranty information or technical support, please contact SAMCON customer service through your point of purchase. Keep your purchase receipt as proof of purchase.