JIARUIXIN DR01 V2.6 390MYK 12V Electric Ride-On Car Remote Control and Receiver Kit

పరిచయం

This manual provides detailed instructions for the installation, operation, and maintenance of your JIARUIXIN DR01 V2.6 390MYK 12V 2.4G Bluetooth Remote Control and Receiver Kit. This kit is designed as a replacement part for specific children's electric ride-on cars. Please read this manual thoroughly before installation and use to ensure proper function and safety.

భద్రతా సమాచారం

• Always disconnect power to the ride-on car before installing or replacing any components.
• Ensure all connections are secure and correctly polarized to prevent damage to the control box or the vehicle.
• This product is intended for use by adults for installation and maintenance. Keep small parts away from children.
• Do not expose the control box or remote control to water or excessive moisture.
• Use only with compatible 12V electric ride-on cars as specified.

ప్యాకేజీ విషయాలు

మీ ప్యాకేజీలో అన్ని అంశాలు ఉన్నాయని ధృవీకరించండి:

• 1 x Control Box (DR01 V2.6 390MYK 12V)
• 1 x Remote Control (2.4G Bluetooth)

అనుకూలత తనిఖీ

Before installation, it is crucial to confirm that this control box is compatible with your electric ride-on car. Open your vehicle and compare the appearance and model number of your existing control box with the one provided in this kit.

చిత్ర వివరణ: This image displays two control boxes side-by-side. The left box is labeled "390MYK" and the right box is labeled "390BLE". A large equals sign (=) is positioned between them, indicating that "390MYK" is equivalent to "390BLE" for compatibility purposes. Both boxes are labeled "DR01 V2.6 +12V". This visual comparison helps users identify if their existing control box matches the replacement.

The model numbers DR01 V2.6 390MYK 12V and DR01 V2.6 390BLE 12V are interchangeable. If your original control box has a similar appearance and one of these model numbers, this replacement part should be compatible.

సెటప్ మరియు ఇన్‌స్టాలేషన్

1. పవర్ డిస్‌కనెక్ట్ చేయండి: Before beginning any installation, ensure the electric ride-on car's battery is disconnected to prevent electrical shock or damage.
2. Locate Original Control Box: Open the ride-on car's chassis to access the existing control box. Note the wiring connections.
3. Remove Original Control Box: Carefully disconnect all wires from the old control box and remove it from the vehicle.
4. కొత్త కంట్రోల్ బాక్స్‌ను ఇన్‌స్టాల్ చేయండి: Connect the wires from the ride-on car to the new DR01 V2.6 390MYK 12V control box. Ensure all connections are firm and correctly matched (e.g., motor wires, power input, steering).
5. సురక్షిత నియంత్రణ పెట్టె: Mount the new control box securely within the vehicle's chassis.
6. పవర్‌ని మళ్లీ కనెక్ట్ చేయండి: Reconnect the ride-on car's battery.

చిత్ర వివరణ: ఈ చిత్రం వివరణాత్మకమైన view of the DR01 V2.6 390MYK 12V control box. The label "DR01 V2.6 390MYK +12V" is clearly visible. Various connection ports and circuit board components are shown, illustrating the physical layout for installation reference.

Operating Instructions: Remote Control Pairing

After installing the new control box, you must pair the 2.4G Bluetooth remote control with the ride-on car. This process is also necessary if you replace the remote control's batteries.

1. పవర్ ఆన్ కారు: Turn on the electric ride-on car.
2. Activate Remote Pairing: On the remote control, press and hold the pairing button (often indicated by a small antenna icon or a specific symbol, refer to your remote's specific markings if different).
3. Observe Indicator: While holding the pairing button, the indicator light on the remote control should start flashing.
4. విడుదల బటన్: Once the indicator light on the remote control stops flashing and remains solid, or if the car responds, the pairing is successful. Release the pairing button.
5. పరీక్ష కార్యాచరణ: Test all functions of the remote control (forward, backward, left, right, speed settings) to ensure proper operation.

చిత్ర వివరణ: This image shows the red 2.4G Bluetooth remote control. It features directional buttons (up, down, left, right), speed/mode buttons, and a central pairing indicator light, which is typically a small triangular LED. This helps users identify the remote and its controls.

గమనిక: The exact location and symbol for the pairing button may vary slightly between remote control models. If you encounter difficulties, consult the original ride-on car's manual for specific pairing instructions, or try pressing and holding the "M" or "Code" button if present on your remote.

నిర్వహణ

• శుభ్రపరచడం: Use a dry, soft cloth to clean the control box and remote control. Do not use harsh chemicals or abrasive cleaners.
• నిల్వ: Store the components in a dry place, away from direct sunlight and extreme temperatures.
• బ్యాటరీ భర్తీ (రిమోట్): When the remote control's range decreases or it becomes unresponsive, replace its batteries. Always re-sync the remote control with the car after changing batteries.
• కనెక్షన్ తనిఖీలు: Periodically check all wiring connections to the control box to ensure they remain secure.

ట్రబుల్షూటింగ్

స్పెసిఫికేషన్లు

• మోడల్ సంఖ్య: DR01 V2.6 390MYK 12V (also compatible with DR01 V2.6 390BLE 12V)
• వాల్యూమ్tage: 12V
• నియంత్రణ పద్ధతి: 2.4G బ్లూటూత్
• మెటీరియల్: ప్లాస్టిక్
• అంశం కొలతలు: సుమారు 4.8 x 3.8 x 1.8 అంగుళాలు
• అసెంబ్లీ అవసరం: Yes (installation into ride-on car)

వారంటీ మరియు మద్దతు

For any questions, technical support, or warranty inquiries regarding your JIARUIXIN DR01 V2.6 390MYK 12V Remote Control and Receiver Kit, please contact the seller or manufacturer directly through your purchase platform. Please have your order number and product model information ready when contacting support.

Manufacturer: JIARUIXIN