Integy C31589

Integy WP-S16-RTR 25A Waterproof Brushless Electronic Speed Controller Instruction Manual

మోడల్: సి 31589

1. పరిచయం

This manual provides essential information for the proper installation, operation, and maintenance of your Integy WP-S16-RTR 25A Waterproof Brushless Electronic Speed Controller (ESC). Designed for 1/16 and 1/18 scale RC cars, this ESC offers reliable performance with 2S or 3S LiPo battery compatibility. Please read this manual thoroughly before use to ensure safe and optimal performance.

2. భద్రతా సూచనలు

Adherence to the following safety guidelines is crucial for preventing damage to the ESC, other components, and personal injury.

  • బ్యాటరీ భద్రత: Always use batteries within the specified voltage range (2-3S LiPo or 6-9 cells NiMH). Incorrect voltage తీవ్రమైన నష్టాన్ని కలిగిస్తుంది.
  • ధ్రువణత: Ensure correct battery polarity when connecting. Reverse polarity will damage the ESC.
  • జలనిరోధిత రేటింగ్: While this ESC is waterproof, it is not designed for prolonged submersion. Always dry the ESC thoroughly after exposure to moisture to prevent corrosion.
  • మోటార్ అనుకూలత: Use only with compatible brushless motors as specified in the 'Specifications' section.
  • వెంటిలేషన్: వేడెక్కకుండా నిరోధించడానికి ఆపరేషన్ సమయంలో ESC చుట్టూ తగినంత గాలి ప్రసరణ ఉండేలా చూసుకోండి.
  • డిస్‌కనెక్ట్: Always disconnect the battery from the ESC when not in use to prevent accidental activation and battery discharge.
  • పిల్లలు: This product is not a toy. Keep out of reach of children under 15 years of age. Adult supervision is recommended during operation.

3. ఉత్పత్తి ముగిసిందిview

The Integy WP-S16-RTR ESC is a compact and robust electronic speed controller designed for various RC applications. It features a durable casing and integrated wiring for motor, battery, and receiver connections.

Integy WP-S16-RTR 25A Waterproof Brushless ESC with wires and switch

చిత్రం 3.1: పైభాగం view of the Integy WP-S16-RTR 25A Waterproof Brushless ESC, showing the main unit, motor wires (blue, yellow, orange connectors), battery wires (red, black), and receiver wire with power switch.

కీలక భాగాలు:

  • ESC Unit: The main control module.
  • మోటార్ వైర్లు: Three wires (typically blue, yellow, orange) for connecting to a brushless motor.
  • బ్యాటరీ వైర్లు: Red (+) and Black (-) wires for connecting to the battery.
  • Receiver Wire (Rx Wire): Connects to the throttle channel of your RC receiver.
  • పవర్ స్విచ్: Integrated switch for turning the ESC on and off.
  • Built-in BEC: Provides regulated 6V/1A power to the receiver and servos.

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

Follow these steps for proper installation of the ESC into your RC vehicle.

  1. ESC ని మౌంట్ చేయడం: Securely mount the ESC in your vehicle using double-sided tape or zip ties, ensuring it is protected from excessive vibration and impact. Allow for adequate ventilation.
  2. మోటార్ కనెక్షన్: Connect the three motor wires from the ESC to the corresponding wires on your brushless motor. The order of connection may affect motor rotation direction; if the motor spins in the wrong direction, swap any two of the three motor wires.
  3. రిసీవర్ కనెక్షన్: Plug the receiver wire (Rx Wire) from the ESC into the throttle channel (usually channel 2) of your RC receiver.
  4. బ్యాటరీ కనెక్షన్: Connect your battery pack to the battery wires of the ESC, ensuring correct polarity (red to positive, black to negative).
  5. Initial Calibration (Throttle Range):
    • మీ ట్రాన్స్‌మిటర్‌ను ఆన్ చేసి, థొరెటల్ ట్రిమ్ తటస్థంగా ఉందని నిర్ధారించుకోండి.
    • With the ESC power switch off, connect the battery.
    • Press and hold the ESC's power button (if applicable, or follow specific calibration instructions for your model if different).
    • Turn on the ESC. Release the button when the LED flashes.
    • Move the throttle stick to full throttle and hold. The ESC will beep.
    • Move the throttle stick to full brake/reverse and hold. The ESC will beep again.
    • Return the throttle stick to neutral. The ESC will beep, indicating calibration is complete.

5. ఆపరేటింగ్ సూచనలు

Once installed and calibrated, your ESC is ready for operation.

  • పవర్ ఆన్: Turn on your RC transmitter first, then turn on the ESC using its power switch.
  • డ్రైవింగ్: Operate your vehicle using the transmitter's throttle and steering controls.
  • పవర్ ఆఫ్: Always turn off the ESC first, then turn off your transmitter. Disconnect the battery immediately after use.
  • అధిక వేడి రక్షణ: The ESC features built-in overheat protection. If the ESC becomes too hot, it may reduce power or shut down temporarily. Allow it to cool before resuming operation.
  • తక్కువ వాల్యూమ్tagఇ కటాఫ్ (LVC): For LiPo batteries, the ESC has an LVC feature to prevent over-discharge. When the battery voltage drops below a safe level, the ESC will reduce power or cut off to protect the battery.

6. నిర్వహణ

Regular maintenance ensures the longevity and performance of your ESC.

  • శుభ్రపరచడం: After each use, especially in dusty or wet conditions, clean the ESC. Use a soft brush or compressed air to remove dirt and debris. For wet conditions, ensure the ESC is completely dry before storage or next use.
  • తనిఖీ: అన్ని వైర్లు మరియు కనెక్టర్లను అరిగిపోవడం, చిరిగిపోవడం లేదా తుప్పు పట్టడం వంటి సంకేతాల కోసం కాలానుగుణంగా తనిఖీ చేయండి. దెబ్బతిన్న భాగాలను వెంటనే భర్తీ చేయండి.
  • నిల్వ: Store the ESC in a cool, dry place away from direct sunlight and extreme temperatures. Always disconnect the battery before storage.

7. ట్రబుల్షూటింగ్

సాధారణ సమస్యలు మరియు వాటి సంభావ్య పరిష్కారాల కోసం ఈ విభాగాన్ని చూడండి.

సమస్యసాధ్యమైన కారణంపరిష్కారం
Motor does not run or runs intermittently.
  • బ్యాటరీ కనెక్ట్ కాలేదు లేదా తక్కువ వాల్యూమ్ ఉందిtage.
  • Loose motor or receiver connections.
  • Incorrect throttle calibration.
  • Motor or ESC damage.
  • బ్యాటరీ కనెక్షన్ మరియు ఛార్జ్ స్థాయిని తనిఖీ చేయండి.
  • అన్ని కనెక్షన్లు సురక్షితంగా ఉన్నాయని ధృవీకరించండి.
  • Perform throttle calibration (Section 4).
  • Inspect motor and ESC for visible damage.
Motor runs in the wrong direction.Incorrect motor wire connection order.Swap any two of the three motor wires between the ESC and motor.
ESC వేడెక్కుతుంది.
  • తగినంత వెంటిలేషన్.
  • Motor gearing too high.
  • Motor limit exceeded.
  • Ensure proper airflow around the ESC.
  • Reduce motor pinion size or increase spur gear size.
  • Verify motor compatibility with ESC specifications.
Vehicle stops or loses power suddenly.
  • తక్కువ వాల్యూమ్tage Cutoff (LVC) activated.
  • ఓవర్ హీట్ ప్రొటెక్షన్ యాక్టివేట్ చేయబడింది.
  • బ్యాటరీని రీఛార్జ్ చేయండి లేదా భర్తీ చేయండి.
  • Allow ESC to cool down.

8. స్పెసిఫికేషన్లు

Detailed technical specifications for the Integy WP-S16-RTR 25A Waterproof Brushless ESC.

  • నిరంతర కరెంట్: 25A
  • బర్స్ట్ కరెంట్: 90A
  • ప్రతిఘటన: 0.005 ఓం
  • Car Applicable: 1/16, 1/18 Scale RC Cars
  • Motor Limit (2S LiPo / 6 cells NiMH):
    • On-road: ≥12T
    • Off-road: ≥18T
    • Motor Size: 2040 Size Motor
  • Motor Limit (3S LiPo / 9 cells NiMH):
    • On-road: ≥18T
    • Off-road: ≥24T
    • Motor Size: 2040 Size Motor
  • Built-in BEC: 6V/1A (స్విచ్ మోడ్)
  • Program Port: Rx Wire
  • కొలతలు: 36mm x 28mm x 21mm
  • నికర బరువు: 38గ్రా
  • అంశం మోడల్ సంఖ్య: C31589

9. వారంటీ మరియు మద్దతు

For warranty information, technical support, or replacement parts, please visit the official Integy webసైట్‌లో లేదా వారి కస్టమర్ సర్వీస్ విభాగాన్ని సంప్రదించండి. కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదును ఉంచండి.

Official Integy Webసైట్: www.integy.com తెలుగు in లో

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.