DEWALT ToughSeries 25ft Illuminated Tape Measure (DWHT35625S)

పరిచయం

The DEWALT ToughSeries 25ft Illuminated Tape Measure (Model DWHT35625S) is engineered for durability and enhanced visibility in demanding work environments. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your tape measure.

మూర్తి 1: ముందు view of the DEWALT ToughSeries 25ft Illuminated Tape Measure.

సెటప్

ప్రారంభ ఛార్జింగ్

Before first use, fully charge the integrated LED battery. The tape measure includes a USB charging cable for convenience.

• Locate the USB charging port on the side of the tape measure.
• Connect the provided USB cable to the tape measure and a compatible USB power source (e.g., wall adapter, computer USB port).
• ఛార్జింగ్ సమయంలో ఛార్జింగ్ ఇండికేటర్ లైట్ వెలుగుతుంది.
• Allow approximately 3 hours for a full charge. A full charge provides up to 3 hours of continuous LED runtime.

Figure 2: The DEWALT ToughSeries tape measure showing the included USB charging cable.

Figure 3: The tape measure connected to a power source for charging.

ఆపరేటింగ్ సూచనలు

Extending and Retracting the Blade

• To extend the blade, pull the end hook away from the case.
• To retract the blade, release the end hook and allow the blade to smoothly return into the case. Guide the blade to prevent rapid retraction.

Using the Slide Lock

• To lock the blade at a desired measurement, push the slide lock button forward.
• To release the lock, pull the slide lock button backward.

Activating the LED Light

The integrated LED light illuminates the measurement area for improved visibility in low-light conditions.

• Press the LED power button (typically located near the blade opening) to turn the light on.
• లైట్ ఆఫ్ చేయడానికి బటన్‌ను మళ్లీ నొక్కండి.
• The LED features an automatic shut-off function after 60 seconds of inactivity to conserve battery life.

Figure 4: The LED light illuminates the measurement area for clear readings.

రీడింగ్ కొలతలు

The tape measure features a double-sided blade print, allowing for easy reading from various angles, including overhead measurements.

Figure 5: The double-sided blade print facilitates overhead measurements.

నిర్వహణ

క్లీనింగ్

• Regularly wipe the blade and case with a clean, damp దుమ్ము మరియు చెత్తను తొలగించడానికి వస్త్రం.
• Avoid using harsh chemicals or abrasive cleaners, as these can damage the blade markings or case finish.
• Ensure the blade is dry before fully retracting it into the case to prevent rust.

బ్యాటరీ సంరక్షణ

• Recharge the battery when the LED light dims or fails to illuminate.
• దీర్ఘకాలిక నిల్వ కోసం, బ్యాటరీని సుమారు 50% వరకు ఛార్జ్ చేసి, చల్లని, పొడి ప్రదేశంలో నిల్వ చేయండి.

నిల్వ

• టేప్ కొలతను పొడి వాతావరణంలో, తీవ్రమైన ఉష్ణోగ్రతలకు దూరంగా నిల్వ చేయండి.
• The ToughSeries design provides a 100ft drop rating, but proper storage helps prolong the tool's lifespan.

ట్రబుల్షూటింగ్

LED లైట్ పనిచేయడం లేదు

• బ్యాటరీ స్థాయిని తనిఖీ చేయండి: The battery may be depleted. Connect the tape measure to a USB power source and allow it to charge for at least 30 minutes before attempting to use the LED again.
• Ensure Proper Activation: Press the LED power button firmly.

Blade Does Not Retract Smoothly

• బ్లేడ్ శుభ్రం చేయండి: Dust, dirt, or debris on the blade can hinder retraction. Extend the blade fully and carefully wipe it clean with a damp గుడ్డ.
• అడ్డంకుల కోసం తనిఖీ చేయండి: Inspect the blade opening for any foreign objects that might be blocking the blade's path.

Slide Lock Not Engaging/Disengaging

• చెత్తను క్లియర్ చేయండి: Ensure no debris is lodged around the slide lock mechanism.
• సరైన ఆపరేషన్: Confirm you are pushing the slide lock fully forward to engage and fully backward to disengage.

స్పెసిఫికేషన్లు

వారంటీ సమాచారం

DEWALT products are typically covered by a limited warranty. For specific warranty terms and conditions applicable to your region and product, please refer to the official DEWALT webసైట్ లేదా వారి కస్టమర్ సపోర్ట్‌ను సంప్రదించండి. వారంటీ క్లెయిమ్‌ల కోసం మీ కొనుగోలు రుజువును ఉంచండి.

కస్టమర్ మద్దతు

For technical assistance, replacement parts, or further inquiries regarding your DEWALT ToughSeries 25ft Illuminated Tape Measure (Model DWHT35625S), please visit the official DEWALT website or contact their customer service department. When contacting support, please have your model number (DWHT35625S) and purchase details readily available.