Lemorele R15 RX

Lemorele R15 RX Wireless HDMI Extender User Manual

Model: R15 RX

1. పరిచయం

This manual provides detailed instructions for the installation, operation, and maintenance of your Lemorele R15 RX Wireless HDMI Extender. This device allows for wireless transmission of HDMI video and audio signals over distances up to 656 feet (200 meters), supporting configurations where one transmitter (TX) can be paired with up to four receivers (RXs). It features LoopOutput, KVM functionality, and IR pass-through for enhanced control. Please read this manual thoroughly before use to ensure proper setup and optimal performance.

2 కీ ఫీచర్లు

  • Wireless HDMI Extension: Transmits HDMI signals wirelessly up to 656 feet (200 meters).
  • బహుళ-రిసీవర్ మద్దతు: One transmitter (TX) can be paired with up to four receivers (RXs) simultaneously.
  • LoopOutput: HDMI output on the transmitter for local monitoring.
  • KVM కార్యాచరణ: Supports Keyboard, Video, and Mouse extension.
  • IR Pass-through: Allows control of the source device from the receiver location.
  • 5G Streaming: Utilizes 5G wireless technology for stable video and audio transmission.
  • విస్తృత అనుకూలత: Compatible with various HDMI source devices and displays including TVs, monitors, projectors, cable boxes, Blu-ray players, gaming consoles (PS5/4/3, Xbox), computers, and laptops.

3. ప్యాకేజీ విషయాలు

క్రింద జాబితా చేయబడిన అన్ని వస్తువులు మీ ప్యాకేజీలో చేర్చబడ్డాయని దయచేసి ధృవీకరించండి:

  • 1 x HDMI Receiver (RX)
  • 2 x Antennae
  • 1 x HDMI కేబుల్
  • 1 x IR IN Cable
  • 1 x ఆడియో కేబుల్
  • 1 x పవర్ అడాప్టర్
  • 1 x వినియోగదారు మాన్యువల్

4. సెటప్ సూచనలు

4.1 Initial Pairing Steps

  1. Ensure both the transmitter (TX) and receiver (RX) units are powered off.
  2. Connect the HDMI output of the receiver (RX) to the HDMI input of the transmitter (TX) using an HDMI cable. This direct connection is for initial pairing only.
  3. ట్రాన్స్మిటర్ మరియు రిసీవర్ యూనిట్లు రెండింటిపై పవర్.
  4. Observe the STA (green light) indicator on both the receiver and transmitter. After a few seconds, the STA lights on both units will illuminate steadily, indicating successful pairing.
  5. Once paired, disconnect the HDMI cable used for pairing.

4.2 ప్రామాణిక కనెక్షన్

After successful pairing, proceed with the standard connection as follows:

  1. Transmitter (TX) Setup:
    • Connect your HDMI source device (e.g., computer, Blu-ray player) to the HDMI IN port of the transmitter using an HDMI cable.
    • (Optional) If local monitoring is desired, connect a display to the HDMI OUT (LoopOutput) port of the transmitter.
    • Connect the power adapter to the transmitter and plug it into a power outlet.
    • Attach the antennae to the transmitter unit.
  2. Receiver (RX) Setup:
    • Connect your display device (e.g., TV, monitor, projector) to the HDMI OUT port of the receiver using an HDMI cable.
    • Connect the power adapter to the receiver and plug it into a power outlet.
    • Attach the antennae to the receiver unit.
    • (Optional) For IR pass-through, connect the IR IN cable to the receiver and position the IR emitter near the IR sensor of your source device.
    • (Optional) For KVM functionality, connect your keyboard and mouse to the USB ports on the receiver.
Diagram showing one HDMI transmitter (TX) wirelessly connected to four HDMI receivers (RXs), each connected to a display.

చిత్రం 1: ఉదాample setup demonstrating one transmitter (TX) paired with four receivers (RXs) for multi-display output. The TX unit is connected to a source (not shown) and wirelessly broadcasts to multiple RX units, each connected to a separate display.

4.3 Multi-Receiver Configuration (1 TX to 4 RXs)

The Lemorele R15 RX system supports connecting one transmitter to up to four receivers. Follow the "Initial Pairing Steps" for each receiver you wish to pair with the transmitter. Once all receivers are paired, they will simultaneously receive the signal from the single transmitter.

5. ఆపరేటింగ్ సూచనలు

5.1 పవర్ ఆన్/ఆఫ్

  • To power on, connect the power adapter to the unit and a power outlet. The unit will automatically power on.
  • To power off, disconnect the power adapter from the unit.

5.2 సిగ్నల్ ట్రాన్స్మిషన్

Once all connections are made and units are powered on, the transmitter will automatically detect the HDMI input and begin broadcasting the signal. The receivers will automatically detect the wireless signal and display the content on the connected monitors. Ensure that the source device is outputting a compatible HDMI signal.

5.3 IR రిమోట్ కంట్రోల్

If you have connected the IR IN cable to the receiver and positioned the IR emitter correctly near your source device's IR sensor, you can use your source device's remote control from the receiver location to control the source.

5.4 KVM కార్యాచరణ

For KVM functionality, connect your USB keyboard and mouse to the designated USB ports on the receiver unit. This allows you to control the connected computer (source device) from the receiver location.

6. నిర్వహణ

  • శుభ్రపరచడం: పరికరాన్ని శుభ్రం చేయడానికి మృదువైన, పొడి వస్త్రాన్ని ఉపయోగించండి. ద్రవ లేదా ఏరోసోల్ క్లీనర్‌లను ఉపయోగించవద్దు.
  • నిల్వ: పరికరాన్ని ప్రత్యక్ష సూర్యకాంతి మరియు తీవ్రమైన ఉష్ణోగ్రతలు లేకుండా చల్లని, పొడి ప్రదేశంలో నిల్వ చేయండి.
  • వెంటిలేషన్: Ensure proper ventilation around the units to prevent overheating. Do not block any ventilation openings.
  • నిర్వహణ: యూనిట్లను జాగ్రత్తగా నిర్వహించండి. వాటిని పడవేయడం లేదా బలమైన ప్రభావాలకు గురిచేయకుండా ఉండండి.

7. ట్రబుల్షూటింగ్

సమస్యసాధ్యమైన కారణంపరిష్కారం
డిస్ప్లేలో సిగ్నల్ లేదు.
  • తప్పుడు కేబుల్ కనెక్షన్లు.
  • యూనిట్లు ఆన్ చేయబడలేదు.
  • Pairing failed or lost.
  • మూల పరికరం సిగ్నల్‌ను అవుట్‌పుట్ చేయడం లేదు.
  • దూరం చాలా ఎక్కువ లేదా అడ్డంకులు.
  • Check all HDMI and power cable connections.
  • TX మరియు RX యూనిట్లు రెండూ ఆన్ చేయబడ్డాయని నిర్ధారించుకోండి.
  • Repeat the initial pairing steps (Section 4.1).
  • Verify the source device is on and outputting an HDMI signal.
  • Reduce distance between TX and RX, remove obstructions, or reposition antennae.
వీడియో నాణ్యత సరిగా లేకపోవడం లేదా మినుకుమినుకుమనే లక్షణం.
  • బలహీనమైన వైర్‌లెస్ సిగ్నల్.
  • ఇతర 5G పరికరాల నుండి జోక్యం.
  • కేబుల్స్ వదులుగా లేదా దెబ్బతిన్నాయి.
  • Ensure TX and RX are within range and line of sight.
  • Minimize other 5G wireless devices nearby.
  • Check and secure all HDMI cables. Replace if damaged.
IR రిమోట్ కంట్రోల్ పనిచేయడం లేదు.
  • IR emitter not correctly positioned.
  • IR cable not fully connected.
  • Ensure the IR emitter is directly facing the IR sensor of the source device.
  • Check the IR IN cable connection to the receiver.

8. స్పెసిఫికేషన్లు

మోడల్ సంఖ్యR15 RX
బ్రాండ్లెమోరెల్
ఉత్పత్తి కొలతలు3.58 x 3.5 x 1.25 అంగుళాలు
వస్తువు బరువు1.38 పౌండ్లు
కనెక్టివిటీ టెక్నాలజీHDMI, Wireless (5G)
అనుకూల పరికరాలుTelevision, Monitor, Projector, Cable box, Blu-ray Players, PS 5/4/3, Xbox, Computers, Laptop, etc.
మొత్తం HDMI పోర్ట్‌లు3 (on TX: 1 IN, 1 OUT; on RX: 1 OUT)
ఆడియో అవుట్‌పుట్ మోడ్చుట్టుముట్టండి
సరౌండ్ సౌండ్ ఛానెల్ కాన్ఫిగరేషన్4.0
రంగునలుపు

9. వారంటీ మరియు మద్దతు

9.1 ఉత్పత్తి వారంటీ

Lemorele offers a one-year product warranty from the date of purchase. During this period, you may request an unconditional return or exchange for any manufacturing defects or performance issues. Please retain your proof of purchase for warranty claims.

9.2 కస్టమర్ మద్దతు

For any inquiries, technical assistance, or warranty claims, please contact Lemorele customer service. Our support team is available 24 hours online to assist you.

  • ఆన్‌లైన్ మద్దతు: Visit the official Lemorele website or contact through your purchase platform.
  • ఇమెయిల్ మద్దతు: మీ ఉత్పత్తి ప్యాకేజింగ్ లేదా అధికారిక webమద్దతు ఇమెయిల్ చిరునామా కోసం సైట్.

Note: For the most up-to-date contact information, please refer to the Lemorele official webసైట్ లేదా మీ ఉత్పత్తి ప్యాకేజింగ్‌తో అందించబడిన సంప్రదింపు వివరాలు.

© 2023 లెమోరెల్. అన్ని హక్కులూ ప్రత్యేకించుకోవడమైనది.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.