Qulose Keyboard Case for Surface Go (3/2/1) User Manual

1. పరిచయం

This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your Qulose Keyboard Case for Surface Go (3/2/1). Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

2. ప్యాకేజీ విషయాలు

మీ ప్యాకేజీలో అన్ని అంశాలు ఉన్నాయని ధృవీకరించండి:

• Qulose Surface Go Keyboard Case
• USB టైప్-సి ఛార్జింగ్ కేబుల్
• వినియోగదారు మాన్యువల్ (ఈ పత్రం)

3. అనుకూలత

This keyboard case is specifically designed for the following Microsoft Surface Go models:

• Surface Go 1 (10 inch)
• Surface Go 2 (10.5 inch)
• Surface Go 3 (10.5 inch)

ముఖ్యమైన:

• This keyboard case is అనుకూలంగా లేదు with Surface Pro models (e.g., Surface Pro 3, 4, 5, 6, 7, 7+, 8, 9, X).
• Please confirm your tablet model before attempting installation.

Figure 3.1: Compatible and Incompatible Surface Models

4. సెటప్ గైడ్

4.1. కీబోర్డ్‌ను ఛార్జ్ చేయడం

The keyboard features a built-in rechargeable 500mAh Li-ion battery. Use the provided USB Type-C cable to charge the keyboard. A full charge typically takes approximately 3 hours.

• Connect the USB Type-C end of the cable to the keyboard's charging port.
• USB-A ఎండ్‌ను అనుకూలమైన USB పవర్ అడాప్టర్ (చేర్చబడలేదు) లేదా కంప్యూటర్ యొక్క USB పోర్ట్‌కి కనెక్ట్ చేయండి.
• ఛార్జింగ్ ఇండికేటర్ లైట్ ఛార్జింగ్ సమయంలో వెలుగుతుంది మరియు పూర్తిగా ఛార్జ్ అయిన తర్వాత ఆపివేయబడుతుంది.

Figure 4.1: Keyboard Charging Port and Battery Information

4.2. Installing Your Surface Go into the Case

Follow these steps to securely install your Surface Go tablet into the protective case:

1. Slide your Surface Go tablet from the spine of the back case all the way towards the bottom. Press the device until it snaps securely into place.
2. Open the tablet's built-in kickstand.
3. Press the kickstand against the back case until it is fully snapped in place.
4. Adjust the kickstand to the angle that works best for you.

Figure 4.2: Surface Go Case Installation Steps

4.3. Removing Your Surface Go from the Case

To remove your Surface Go tablet from the case:

1. Open your Surface Go tablet kickstand (with the protective case attached).
2. Hold the tablet on one side and gently push the built-in kickstand off the back cover. The back cover piece is held in place by two buckles.
3. Remove your Surface Go tablet from the upper side of the case.
4. Finish the removal process.

Figure 4.3: Surface Go Case Removal Steps

4.4. బ్లూటూత్ పెయిరింగ్

Follow these steps to connect your keyboard to your Surface Go via Bluetooth:

1. Turn on the power switch located on the side of the keyboard. The Bluetooth LED indicator will blink.
2. Press the "Fn" + "C" keys simultaneously on the keyboard to activate Bluetooth pairing mode. The Bluetooth indicator will start flashing rapidly.
3. On your Surface Go, go to సెట్టింగ్‌లు > బ్లూటూత్ & పరికరాలు మరియు బ్లూటూత్ ఆన్ చేయబడిందని నిర్ధారించుకోండి ON.
4. Select "Bluetooth Keyboard" from the list of available devices to pair. Once connected, the Bluetooth indicator will stop flashing.

Figure 4.4: Bluetooth Connection Steps

5. ఆపరేటింగ్ సూచనలు

5.1. Keyboard Backlight Control

The keyboard features 7-color backlighting with 3 adjustable brightness levels.

• ప్రకాశాన్ని సర్దుబాటు చేయడానికి: నొక్కండి Fn + F7. Each press cycles through Low (ON), Increase Brightness, and OFF.
• To change backlight color: Press Fn + 💡 💡 తెలుగు (the light bulb key). Each press cycles through the 7 available colors.

Figure 5.1: Backlight Control

5.2. Trackpad Usage and Gestures

The integrated trackpad supports various gestures for precise navigation and control.

• To lock/unlock the trackpad: Press Fn + Alt. This prevents accidental touches during typing.

Figure 5.2: Trackpad Lock/Unlock and Basic Gestures

Detailed Trackpad Gestures:

Table 5.1: Trackpad Gesture Guide

5.3. ఫంక్షన్ కీలు

The keyboard includes a row of practical function keys for easier control of your device.

Figure 5.3: Keyboard Function Keys Layout

5.4. Auto Sleep Mode

To conserve battery life, the keyboard automatically enters sleep mode if not used for 15 minutes. To reactivate, press any key for 5 seconds.

6. నిర్వహణ

Proper care ensures the longevity of your keyboard case:

• శుభ్రపరచడం: ఒక మృదువైన ఉపయోగించండి, డిamp cloth to wipe the exterior of the case and keys. Avoid harsh chemicals or abrasive materials.
• నిల్వ: When not in use for extended periods, ensure the keyboard is fully charged and stored in a cool, dry place.
• రక్షణ: The durable PC case protects your tablet from scratches and minor bumps. However, avoid dropping the device from significant heights.

7. ట్రబుల్షూటింగ్

If you encounter issues with your Qulose Keyboard Case, refer to the following common solutions:

• Keyboard Not Connecting/Pairing:
  • కీబోర్డ్ ఛార్జ్ చేయబడిందని మరియు పవర్ ఆన్ చేయబడిందని నిర్ధారించుకోండి.
  • Verify Bluetooth is enabled on your Surface Go.
  • నొక్కండి Fn + C to put the keyboard into pairing mode.
  • Forget the device in your Surface Go's Bluetooth settings and attempt to re-pair.
  • Ensure the keyboard is within the 33-foot Bluetooth range.
• బ్యాక్‌లైట్ పనిచేయడం లేదు/సర్దుబాటు చేయడం లేదు:
  • నొక్కండి Fn + F7 to cycle through brightness levels (Low, High, Off).
  • నొక్కండి Fn + 💡 💡 తెలుగు to change backlight colors.
  • కీబోర్డ్ తగినంత బ్యాటరీ ఛార్జ్ కలిగి ఉందని నిర్ధారించుకోండి.
• ట్రాక్‌ప్యాడ్ స్పందించడం లేదు:
  • The trackpad might be locked. Press Fn + Alt to toggle the trackpad lock/unlock function.
  • Ensure your Surface Go's operating system is up to date.
  • Try restarting both the keyboard (turn off/on) and your Surface Go.
• Keyboard Entering Sleep Mode Too Quickly:
  • The keyboard is designed to enter sleep mode after 15 minutes of inactivity to save power. This is normal operation. Press any key for 5 seconds to wake it up.

8. స్పెసిఫికేషన్లు

9. వారంటీ మరియు మద్దతు

Qulose products are designed for reliability and performance. For any product-related inquiries, technical support, or warranty claims, please contact Qulose customer service through the platform where you purchased the product. Please retain your proof of purchase for warranty validation.