AWithZ U3 7500mAh Portable Spot Welder User Manual

1. పరిచయం

This manual provides detailed instructions for the safe and efficient operation of your AWithZ U3 7500mAh Portable Spot Welder. Please read this manual thoroughly before using the device to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2. భద్రతా సమాచారం

Always observe the following safety precautions when operating the spot welder:

• Wear appropriate personal protective equipment, including safety glasses and gloves, to protect against sparks and heat.
• పని ప్రదేశం బాగా వెంటిలేషన్ చేయబడిందని మరియు మండే పదార్థాలు లేకుండా ఉండేలా చూసుకోండి.
• Do not operate the device in wet conditions or with wet hands.
• పిల్లలను మరియు అనధికార సిబ్బందిని ఆపరేటింగ్ ప్రాంతం నుండి దూరంగా ఉంచండి.
• Do not attempt to weld materials thicker than the specified maximum (0.35mm nickel sheet).
• Avoid touching the welding pens or welded materials immediately after operation, as they will be hot.
• Disconnect the power supply when not in use or during maintenance.
• Do not modify the device or use non-original accessories.

3. ప్యాకేజీ విషయాలు

మీ ప్యాకేజీలో అన్ని అంశాలు ఉన్నాయని ధృవీకరించండి:

• 1x AWithZ U3 Spot Welder (with 7500mAh battery)
• 2x Spot Welding Pens
• 1x 2m Nickel-Plated Sheet
• 1x USB టైప్-C ఛార్జింగ్ కేబుల్
• 1x వినియోగదారు మాన్యువల్

Image: Contents of the AWithZ U3 Spot Welder package, including the main unit, welding pens, nickel strip, and charging cable.

4. ఉత్పత్తి ముగిసిందిview

4.1 ముఖ్య లక్షణాలు

• Integrated 7500mAh high-capacity battery for extended use.
• Large display with a 6-grid mobile user interface for easy navigation.
• Multi-language support (including English, German, French, Spanish, Italian).
• Adjustable power with 90 gears for precise welding control.
• Supports continuous spot welding for enhanced weld strength.
• Capable of welding nickel sheets from 0.05mm to 0.35mm thickness.
• Built-in preheating and intermittent welding functions.
• Can function as a power bank for charging mobile devices.

చిత్రం: పైగాview of the AWithZ U3 Spot Welder highlighting its multifunctional capabilities and intelligent precision welding features.

4.2 పరికర భాగాలు

Familiarize yourself with the main parts of your spot welder:

• ప్రధాన యూనిట్: Houses the battery, control board, and display.
• Spot Welding Pens: Connect to the main unit for precise welding.
• డిస్ప్లే స్క్రీన్: Shows welding parameters, battery status, and settings.
• నియంత్రణ బటన్లు: For navigation, power on/off, and parameter adjustment.
• USB-A అవుట్‌పుట్ పోర్ట్: బాహ్య పరికరాలను ఛార్జ్ చేయడానికి.
• టైప్-సి ఇన్‌పుట్ పోర్ట్: For charging the spot welder.

Image: The AWithZ U3 Spot Welder main unit connected to its spot welding pens.

5. సెటప్

1. పరికరాన్ని ఛార్జ్ చేయండి: Before first use, fully charge the spot welder using the provided USB Type-C cable. The display will indicate charging status.
2. Connect Welding Pens: Insert the two spot welding pens firmly into the designated ports on the top of the main unit. Ensure a secure connection.
3. పవర్ ఆన్: Press and hold the power button (usually the middle button) for a few seconds until the display screen illuminates.

Image: A visual guide showing the four quick steps to use the AWithZ U3 Spot Welder: charge, select mode/gear, install pens, and spot weld.

6. ఆపరేటింగ్ సూచనలు

6.1 Interface Navigation and Settings

The AWithZ U3 features a smart 6-grid user interface. Use the navigation buttons to select and adjust parameters.

• భాష ఎంపిక: Press the three buttons simultaneously to change the interface language.
• మోడ్ ఎంపిక: Choose between Automatic or Manual welding modes.
• గేర్ సర్దుబాటు: Adjust the welding power from 1 to 90 gears. Higher gears provide more power.
• ముందుగా వేడి చేయడం: Set preheating time (e.g., 1-10ms) to remove surface oxides for stronger welds.
• Intermittent Welding: Adjust the interval between pulses (e.g., 1-20ms).
• Continuous Spot Welding: Set the number of continuous spots (e.g., 1-2 times) for enhanced weld strength.
• ట్రిగ్గర్ సమయం: Adjust the trigger delay (e.g., 0.5-5s).

Image: The AWithZ U3 Spot Welder's multi-language display showing various adjustable welding parameters.

6.2 వెల్డింగ్ ప్రక్రియ

The AWithZ U3 is suitable for welding nickel sheets to cylindrical batteries (e.g., 18650, 26650, 32650), nickel-metal hydride, and nickel-cadmium batteries.

1. సామాగ్రిని సిద్ధం చేయండి: Ensure battery terminals and nickel strips are clean. Place the nickel strip over the battery terminal.
2. Position Welding Pens: Hold the welding pens firmly, ensuring both tips make contact with the nickel strip and the battery terminal. Apply slight pressure.
3. వెల్డింగ్‌ను ప్రారంభించండి: In Automatic mode, the weld will trigger automatically after a set delay. In Manual mode, press the trigger button on the main unit or the foot pedal (if connected) to initiate the weld.
4. వెల్డింగ్ తనిఖీ చేయండి: After welding, carefully inspect the weld spots for strength and consistency. Adjust parameters as needed for optimal results.

Recommended Settings for 0.35mm Nickel Sheet:

• Continuous Spot Welding: 2 times
• గేర్: 8.2

Image: Demonstration of the spot welding process for battery pack assembly using the AWithZ U3.

6.3 పవర్ బ్యాంక్ ఫంక్షన్

The AWithZ U3 can also serve as a portable power bank. Connect your mobile device to the USB-A output port using a compatible charging cable to charge it.

Image: The AWithZ U3 Spot Welder being used to charge a mobile phone via its USB-A output port.

6.4 అధికారిక ఉత్పత్తి వీడియోలు

Watch these official videos for further guidance on using AWithZ spot welders. While specific models may vary, the general operation principles apply.

7. నిర్వహణ

• శుభ్రపరచడం: Regularly clean the welding pen tips to ensure optimal conductivity. Use fine-grit sandpaper or a file ఏదైనా నిర్మాణాన్ని తొలగించడానికి.
• నిల్వ: Store the spot welder in a dry, cool place away from direct sunlight and moisture.
• బ్యాటరీ సంరక్షణ: For long-term storage, charge the battery to approximately 50-70% to prolong its lifespan. Avoid fully discharging the battery for extended periods.
• తనిఖీ: Periodically check the welding pens and cables for any signs of wear or damage. Replace if necessary.

8. ట్రబుల్షూటింగ్

9. స్పెసిఫికేషన్లు

10. వారంటీ మరియు మద్దతు

Your AWithZ U3 Portable Spot Welder comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact AWithZ customer service through the retailer where you purchased the product or visit the official AWithZ webసైట్.