Mount-It! MI-1765 Single Monitor Wall/Pole Mount Instruction Manual

పరిచయం

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Mount-It! MI-1765 Single Monitor Wall/Pole Mount. Please read this manual thoroughly before installation and retain it for future reference. This mount is designed to support single monitors between 17 and 32 inches, with a maximum weight of 15.4 lbs, and is compatible with VESA 75x75 and 100x100 mounting patterns.

భద్రతా సమాచారం

హెచ్చరిక: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support.

• గరిష్ట బరువు సామర్థ్యం 15.4 పౌండ్లు (7 కిలోలు) మించకూడదు.
• Ensure the mounting surface (wall or pole) can safely support the combined weight of the mount and the monitor.
• Use only the hardware provided. If any parts are missing or defective, contact Mount-It! customer support.
• Do not install into drywall alone. For wood stud mounting, ensure the mount is secured into the center of a solid wood stud. For concrete/brick mounting, use appropriate anchors.
• Always use a second person for assistance during installation, especially when lifting the monitor.
• ఇన్‌స్టాలేషన్ సమయంలో పిల్లలు మరియు పెంపుడు జంతువులను దూరంగా ఉంచండి.
• Check all connections regularly to ensure they remain secure.

ప్యాకేజీ విషయాలు

దయచేసి ఇన్‌స్టాలేషన్‌తో కొనసాగే ముందు అన్ని భాగాలు ఉన్నాయని మరియు దెబ్బతినకుండా ఉన్నాయని ధృవీకరించండి.

• స్ప్రింగ్ ఆర్మ్ అసెంబ్లీ
• వాల్ మౌంటు బేస్
• Pole Mounting Clamp (with alternative bolts for thicker poles)
• వెసా ప్లేట్
• Mounting Hardware (Lag Screws, Washers, Concrete Anchors, Bolts for Monitor)
• హెక్స్ రెంచెస్
• అలంకార కవర్లు
• Bubble Level (may be integrated into tools)

సెటప్ & ఇన్‌స్టాలేషన్

1. Choose Mounting Option: Wall or Pole

The MI-1765 offers versatile mounting options for either a wall or an existing pole. Select the method that best suits your workspace.

Figure 1: Wall and Pole Mounting Options. The image displays two mounting methods: an adjustable pole mount base (fits poles 1.1" - 2.36" diameter) with +/-135° rotation, and a fixed wall mount base with +/-90° and +/-180° rotation options.

2. వాల్ మౌంటింగ్ ఇన్‌స్టాలేషన్

2.1 Wood Stud Mounting

1. Using a stud finder, locate the center of a wood stud at your desired mounting height.
2. Hold the wall mount plate against the stud, ensuring it is centered. Use a bubble level to confirm straightness.
3. Mark the center of the mounting holes with a pencil.
4. Using a 3/16" (4.5mm) drill bit, drill pilot holes at the marked locations.
5. Secure the wall mount plate to the wall using the provided lag screws and washers. Tighten until secure.
6. Insert the decorative covers into each of the bolt holes.

2.2 Concrete / Brick Mounting

1. Hold the wall mount plate at the desired location on the concrete or brick wall. Use a bubble level to ensure straightness.
2. Mark the center of the mounting holes with a pencil.
3. Using a 3/8" (10mm) drill bit, drill holes at the marked locations to a depth of 2.4" (60mm).
4. Clear any dust and debris from the drilled holes.
5. Insert the provided concrete anchors into the holes.
6. Secure the wall mount plate to the wall using the provided lag screws and washers. Tighten until secure.
7. Insert the decorative covers into each of the bolt holes.

3. Pole Mounting Installation

This option is for mounting the arm to an existing pole with a diameter between 1.1" and 2.4".

1. Using the provided hex wrench, loosen the two bolts on the pole clamp cl వరకుamp opens wide enough to slide onto your pole.
2. For thicker poles (1.8" - 2.4" diameter), remove the pre-installed bolts and replace them with the alternative longer bolts provided. Adjust the width of the clamp పోల్ కంటే కొంచెం పెద్దదిగా ఉండాలి.
3. Slide the pole clamp onto the pole at the desired height.
4. Tighten the bolts on the pole clamp సురక్షితం వరకు.

4. Attaching the Spring Arm to the Mount

1. జాగ్రత్త: The spring arm is under tension. It is recommended to have a second person assist with this step. Carefully cut the zip tie securing the spring arm.
2. Place the end of the spring arm onto the end of the wall mount or pole mount.
3. Tighten the bolt on the back of the spring arm to secure it to the base.

5. మానిటర్‌ను అటాచ్ చేయడం

1. Using the appropriate size bolts and washers for your monitor's VESA pattern (75x75mm or 100x100mm), install the top two bolts into the monitor's VESA holes. Leave a gap of approximately 0.1 inches (2.5mm) between the bolt head and the monitor surface.
2. Carefully hang the monitor onto the top of the VESA plate on the spring arm, aligning the top two bolts with the slots.
3. Install the lower two bolts and washers through the lower holes of the VESA plate into the monitor.
4. Tighten all four bolts until secure, ensuring not to overtighten.

Figure 2: Quick Installation Base. This image illustrates the quick and convenient assembly mechanism for attaching the monitor arm to its base.

Operating & Adjustments

The MI-1765 monitor arm features full motion adjustments for optimal viewing comfort and flexibility.

Figure 3: Full Motion Design. This diagram highlights the arm's extension range (3.5" - 21.8"), swivel capabilities (+/-180° and +/-90°), rotation (+/-180°), and maximum height adjustment (12.2").

• ఎత్తు సర్దుబాటు: The spring arm allows for effortless height adjustments. Gently push or pull the monitor to the desired vertical position.
• వంపు సర్దుబాటు: To adjust the monitor's tilt angle, loosen the screw behind the VESA assembly. Position the monitor at the desired angle, then tighten the screw to secure it. The tilt range is up to 90 degrees.
• స్వివెల్ సర్దుబాటు: The arm allows for 180° swivel, enabling you to share your screen easily or adjust your viewing angle. The VESA plate also offers +/-90° swivel.
• భ్రమణం: Rotate your monitor 360° to switch between landscape and portrait orientation.
• పొడిగింపు: The arm extends up to 21.8" (55.4 cm), allowing you to bring your screen closer or push it further away for optimal viewing దూరం.

కేబుల్ నిర్వహణ

Keep your workspace neat and organized by routing cables through the integrated cable management clips.

1. Open the cable management clips located on the underside of the spring arm.
2. Route your monitor's power and video cables through the clips.
3. Close the clips to secure the cables.

Figure 4: Cable Management. This image demonstrates how to use the integrated cable management clips to keep cables tidy and out of sight.

నిర్వహణ

క్రమం తప్పకుండా నిర్వహణ మీ మానిటర్ మౌంట్ యొక్క దీర్ఘాయువు మరియు సురక్షితమైన ఆపరేషన్‌ను నిర్ధారిస్తుంది.

• అన్ని స్క్రూలు మరియు బోల్ట్‌లు బిగుతుగా మరియు సురక్షితంగా ఉన్నాయని నిర్ధారించుకోవడానికి కాలానుగుణంగా వాటిని తనిఖీ చేయండి.
• మౌంట్‌ను మృదువైన, డి-క్లాత్‌తో శుభ్రం చేయండి.amp వస్త్రం. రాపిడి క్లీనర్లు లేదా ద్రావకాలను నివారించండి.
• Do not lubricate any moving parts unless specifically instructed by Mount-It! support.

ట్రబుల్షూటింగ్

మీరు ఏవైనా సమస్యలను ఎదుర్కొంటే, దయచేసి ఈ క్రింది సాధారణ సమస్యలు మరియు పరిష్కారాలను చూడండి:

స్పెసిఫికేషన్లు

వారంటీ & మద్దతు

This Mount-It! monitor arm comes with a LIFETIME warranty. Our knowledgeable and responsive US-based customer support team is available to answer any questions you may have during standard business hours.

For assistance, please visit the Mount-It! website or contact our customer support directly.

ఉత్పత్తి ముగిసిందిview వీడియో