Generic GDA S20W Portable 2D Wireless Barcode Scanner User Manual

1. ఉత్పత్తి ముగిసిందిview

This manual provides instructions for the setup, operation, and maintenance of your GDA S20W Portable 2D Wireless Barcode Scanner. Please read this manual carefully before using the device to ensure optimal performance and longevity.

An image showing the GDA S20W portable 2D wireless barcode scanner, black with orange accents, alongside its small USB receiver.

కీ ఫీచర్లు

• సెన్సార్: CMOS Image Sensor, 0.3 MP, 640 x 480 pixels
• స్కానర్ వేగం: 1/30 frames per second (fps)
• ఫీల్డ్ View: Diagonal 58 degrees, Horizontal 42 degrees, Vertical 36 degrees
• స్కానింగ్ రిజల్యూషన్: 2D≥5mil, 1D≥4mil
• లైటింగ్: తెలుపు
• కనెక్టివిటీ: Wireless (via USB receiver) and Wired (USB Type A cable)
• బ్యాటరీ: 2000 mAh
• అనుకూల పరికరాలు: డెస్క్‌టాప్, ల్యాప్‌టాప్, స్మార్ట్‌ఫోన్, టాబ్లెట్

2. సెటప్ సూచనలు

2.1 స్కానర్‌ను ఛార్జ్ చేయడం

Before initial use, fully charge the scanner. Connect the scanner to a power source (e.g., computer USB port, USB wall adapter) using the provided USB Type A cable. The indicator light on the scanner will show the charging status.

2.2 Connecting Wirelessly

1. Insert the small USB receiver into an available USB port on your computer or compatible device.
2. Power on the barcode scanner by pressing the trigger button or power button (if available).
3. The scanner should automatically pair with the receiver. A successful connection is typically indicated by a specific beep sound or a steady blue indicator light on the scanner.

2.3 Connecting via USB Cable (Wired Mode)

To use the scanner in wired mode, connect the scanner directly to your device using the USB Type A cable. The scanner will function as a wired device, and the battery will charge simultaneously. No additional drivers are usually required for basic operation.

3. Operating the Barcode Scanner

3.1 బార్‌కోడ్‌లను స్కాన్ చేయడం

1. Ensure the scanner is powered on and connected to your device (either wirelessly or via cable).
2. Open an application or text editor on your device where you want the scanned data to appear. Place your cursor in the desired input field.
3. Aim the scanner's light beam at the barcode you wish to scan. Ensure the entire barcode is within the scanning area.
4. Press the trigger button. A successful scan will be indicated by a beep and/or a light flash. The scanned data will appear in your application.

3.2 మద్దతు ఉన్న బార్‌కోడ్ రకాలు

The GDA S20W scanner supports a wide range of both 1D (linear) and 2D (matrix) barcodes, including common types like EAN, UPC, Code 39, Code 128, QR Code, Data Matrix, and PDF417.

4. నిర్వహణ మరియు సంరక్షణ

4.1 శుభ్రపరచడం

To maintain optimal performance, keep the scanner clean. Use a soft, dry, lint-free cloth to wipe the exterior. For the scanning window, use a lens cleaning cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the device.

4.2 బ్యాటరీ సంరక్షణ

The scanner is equipped with a 2000 mAh rechargeable battery. To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in constant use. Do not expose the battery to extreme temperatures.

4.3 నిల్వ

When not in use, store the scanner in a cool, dry place away from direct sunlight, high humidity, and extreme temperatures. Protect it from drops and impacts.

5. ట్రబుల్షూటింగ్ గైడ్

• స్కానర్ ఆన్ చేయడం లేదు:
  Ensure the battery is sufficiently charged. Connect the scanner to a power source using the USB cable and allow it to charge for a period before attempting to power it on again.
• No scan output on device:
  Verify that the scanner is properly connected to your device. If using wireless mode, ensure the USB receiver is securely inserted and the scanner is paired. If using wired mode, check the USB cable connection. Confirm that your cursor is in the correct input field on your device.
• Scanner not pairing wirelessly:
  Try re-inserting the USB receiver into a different USB port. Power cycle the scanner (turn it off and then on again). Refer to section 2.2 for detailed wireless connection steps.
• Incorrect data output or unreadable barcodes:
  Ensure the barcode is clean, undamaged, and within the scanner's optimal reading distance. The scanner supports various barcode types; if a specific type is not reading, it might require a configuration setting (usually done by scanning specific setup barcodes, which are not included in this manual).

ఈ దశలు సమస్యను పరిష్కరించకపోతే, దయచేసి మరింత సహాయం కోసం కస్టమర్ మద్దతును సంప్రదించండి.

6. సాంకేతిక లక్షణాలు

స్పెసిఫికేషన్‌లు నోటీసు లేకుండా మారవచ్చు.

7. వారంటీ సమాచారం

This product is covered by a standard manufacturer's warranty. For specific warranty terms, conditions, and duration, please refer to the product packaging or contact your retailer. It is recommended to retain your proof of purchase for any warranty claims.

8. కస్టమర్ మద్దతు

For technical support, service inquiries, or additional information regarding your GDA S20W Barcode Scanner, please contact your point of purchase or refer to the manufacturer's official webసైట్.

తయారీదారు: సాధారణమైనది

మోడల్: S20W