VGR V-269

VGR V-269 ప్రొఫెషనల్ హెయిర్ క్లిప్పర్ ఇన్‌స్ట్రక్షన్ మాన్యువల్

మోడల్: V-269

1. ఉత్పత్తి ముగిసిందిview

The VGR V-269 Professional Hair Clipper is designed for precise and efficient hair cutting. It features durable DLC coating blades, a powerful 9000 RPM motor, and a long-lasting 2500mAh Lithium-ion battery for extended cordless operation. The integrated digital display provides essential information such as battery status and oil reminders.

VGR V-269 Professional Hair Clipper with accessories

Figure 1: VGR V-269 Professional Hair Clipper shown with its various components including guide combs, charging base, and cleaning tools.

2. పెట్టెలో ఏముంది

అన్ని వస్తువులను జాగ్రత్తగా అన్ప్యాక్ చేయండి మరియు మీరు ఈ క్రింది వాటిని అందుకున్నారని నిర్ధారించుకోండి:

  • 1x VGR V-269 Hair Clipper
  • 4x Cutting Guide Combs (3mm, 6mm, 9mm, 12mm)
  • 1x క్లీనింగ్ బ్రష్
  • 1x ఆయిల్ బాటిల్
  • 1x ఛార్జింగ్ బేస్
  • 1x USB ఛార్జింగ్ కేబుల్
VGR V-269 Hair Clipper and included accessories

చిత్రం 2: వివరణాత్మక view of the VGR V-269 Hair Clipper alongside its full set of accessories, including the charging cable, oil bottle, and cleaning brush.

3. సెటప్ మరియు ఛార్జింగ్

3.1 ప్రారంభ ఛార్జ్

Before first use, fully charge the hair clipper. Connect the USB charging cable to the charging base and plug it into a suitable USB power adapter (not included). Place the clipper onto the charging base. The LED display will indicate charging progress. A full charge takes approximately 3 hours.

3.2 గైడ్ దువ్వెనలను అటాచ్ చేయడం

To attach a guide comb, align the comb with the clipper blade and push it firmly until it clicks into place. To remove, gently pull the comb away from the blade.

VGR V-269 Hair Clipper guide combs and taper lever

Figure 3: Close-up of the VGR V-269 Hair Clipper showing the adjustable guide combs (3mm, 6mm, 9mm, 12mm) and the taper lever for fine-tuning cutting length.

4. ఆపరేటింగ్ సూచనలు

4.1 పవర్ ఆన్/ఆఫ్

Slide the ON/OFF switch located on the side of the clipper to turn the device on or off.

4.2 కట్టింగ్ పొడవును సర్దుబాటు చేయడం

  1. గైడ్ దువ్వెనలను ఉపయోగించడం: Select the desired cutting guide comb (3mm, 6mm, 9mm, or 12mm) and attach it securely to the clipper.
  2. టేపర్ లివర్ ఉపయోగించడం: For fine adjustments between 0.8mm and 2mm, use the taper lever located on the side of the clipper. Move the lever up or down to change the blade's position.

4.3 జుట్టు కత్తిరించడం

Ensure hair is clean and dry. Start with a longer guide comb if unsure of the desired length. Hold the clipper with the blades pointing upwards and move it against the direction of hair growth. Use smooth, even strokes.

VGR V-269 Hair Clipper with digital display

Figure 4: The VGR V-269 Hair Clipper displaying its LED screen, which shows battery status and oil indicator, highlighting its ergonomic design.

5. నిర్వహణ

5.1 బ్లేడ్లను శుభ్రపరచడం

After each use, turn off the clipper and remove any attached guide comb. Use the provided cleaning brush to remove loose hairs from the blades. For a more thorough cleaning, the blades can be carefully detached and rinsed under running water. Ensure blades are completely dry before reattaching.

5.2 బ్లేడ్‌లకు నూనె వేయడం

Regular oiling ensures optimal performance and longevity of the blades. After cleaning and drying, apply a few drops of the included oil to the blades. Turn on the clipper for a few seconds to distribute the oil evenly. Wipe off any excess oil.

6. ట్రబుల్షూటింగ్

  • క్లిప్పర్ ఆన్ కావడం లేదు: Ensure the battery is charged. Connect the clipper to the charging base and allow it to charge for at least 30 minutes before attempting to power on again.
  • తగ్గిన కట్టింగ్ పనితీరు: Clean the blades thoroughly and apply oil. Ensure no hair is trapped between the blades. If performance does not improve, the blades may need replacement.
  • క్లిప్పర్ వేడెక్కుతుంది: This can occur during prolonged use. Allow the clipper to cool down. Ensure blades are clean and oiled to reduce friction.

7. స్పెసిఫికేషన్లు

ఫీచర్వివరాలు
మోడల్ సంఖ్యV-269
బ్లేడ్ మెటీరియల్DLC Coating Blade
మోటార్ వేగం9000 RPM
బ్యాటరీ రకం2500 ఎంఏహెచ్ లిథియం-అయాన్
ఛార్జింగ్ సమయం3 గంటలు
రన్‌టైమ్150 నిమిషాల వరకు
Cutting Guide Combs3mm, 6mm, 9mm, 12mm
సర్దుబాటు చేయగల టేపర్ లివర్0.8mm - 2mm
శక్తి మూలంBattery Powered (Corded/Cordless)
ఉత్పత్తి కొలతలు18 x 5 x 4 సెం.మీ
వస్తువు బరువు335 గ్రా
VGR V-269 Hair Clipper technical specifications summary

Figure 5: A graphic summarizing key technical specifications of the VGR V-269 Hair Clipper, including charging time, operating time, battery capacity, and input voltage.

8. వారంటీ మరియు మద్దతు

The VGR V-269 Professional Hair Clipper comes with a 1-year manufacturer's warranty. For warranty claims, technical support, or any product-related inquiries, please contact VGR customer service:

© 2024 VGR. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.