ANENG 683 స్మార్ట్ డిజిటల్ మల్టీమీటర్ యూజర్ మాన్యువల్

1. ఉత్పత్తి ముగిసిందిview

The ANENG 683 is a versatile and intelligent digital multimeter designed for precise electrical measurements. It features a large VA color reverse display with a smart sensor touch screen, offering clear readability and ease of operation. This device is capable of measuring AC/DC voltage, AC/DC current, resistance, capacitance, frequency, temperature, diode, and includes functions like NCV non-contact induction, fire line detection, duty cycle, and a built-in flashlight.

Figure 1: ANENG 683 Smart Multimeter and its complete set of accessories.

ముఖ్య లక్షణాలు:

• Multifunctional Measurement: కొలతలు AC/DC వాల్యూమ్tage, AC/DC current, resistance, capacitance, frequency, temperature, diode, and more.
• Smart Touch Screen & VA Color Display: Intuitive operation with a large, clear VA color reverse display and 6000 counts max. display.
• NCV Non-contact Induction: Safely detects AC voltage without direct contact, with rapid alarm and flashlight indication.
• అంతర్నిర్మిత ఫ్లాష్‌లైట్: Assists in illuminating dark work environments.
• పునర్వినియోగపరచదగిన లిథియం బ్యాటరీ: Integrated 3.7V 2800mAh lithium battery with Type-C charging for convenience.
• మన్నికైన డిజైన్: Wrapped in a silicone protective sleeve for enhanced durability, shock resistance, and scratch protection.

2. సెటప్ మరియు ప్రారంభ ఉపయోగం

2.1 అన్‌ప్యాకింగ్ మరియు తనిఖీ

Carefully remove the multimeter and all accessories from the packaging. Verify that all components are present and undamaged:

• ANENG 683 Smart Digital Multimeter
• పరీక్ష లీడ్‌లు (ఎరుపు మరియు నలుపు)
• ఉష్ణోగ్రత ప్రోబ్
• USB టైప్-సి ఛార్జింగ్ కేబుల్
• నిల్వ బ్యాగ్
• వినియోగదారు మాన్యువల్ (ఈ పత్రం)

Figure 2: Included accessories for the ANENG 683 Multimeter.

2.2 బ్యాటరీని ఛార్జ్ చేయడం

The ANENG 683 Multimeter is equipped with a built-in rechargeable lithium battery. Before first use, or when the low battery indicator appears, charge the device using the provided USB Type-C cable.

1. Connect the Type-C end of the charging cable to the multimeter's charging port (typically located on the side or top).
2. Connect the USB-A end of the cable to a standard USB power adapter (e.g., phone charger, computer USB port, power bank).
3. The display will indicate charging status. Allow the battery to fully charge before extensive use.

2.3 టెస్ట్ లీడ్‌లను కనెక్ట్ చేయడం

For most measurements, the test leads must be correctly connected to the multimeter.

• చొప్పించు నలుపు పరీక్షలో లీడ్ COM (Common) jack.
• చొప్పించు ఎరుపు పరీక్షలో లీడ్ VΩmA jack for voltage, resistance, capacitance, frequency, diode, and small current measurements.
• For high current (up to 10A) measurements, insert the ఎరుపు పరీక్షలో లీడ్ 10A జాక్.

3. ఆపరేటింగ్ సూచనలు

3.1 పవర్ ఆన్/ఆఫ్

Press and hold the power button (usually located on the side) to turn the multimeter ON or OFF. The device features an automatic power-off function to conserve battery life if left idle for a period.

మూర్తి 3: ముందు view of the ANENG 683 Multimeter display.

3.2 Using the Touch Screen and Modes

The ANENG 683 features a smart sensor touch screen for mode selection and function activation. Tap the desired function icon on the screen to switch between measurement modes.

Figure 4: Interacting with the ANENG 683's touch screen.

Figure 5: Intelligent control screen displaying various measurement options.

3.3 కొలత విధులు

Select the appropriate function on the touch screen before taking a measurement.

• AC/DC వాల్యూమ్tagఇ (వి): Connect test leads in parallel to the circuit or component.
• AC/DC Current (A/mA): Connect test leads in series with the circuit. Ensure correct jack (mA or 10A) is used.
• నిరోధకత (Ω): Ensure the circuit is de-energized. Connect test leads across the component.
• కెపాసిటెన్స్ (F): Ensure the capacitor is discharged. Connect test leads across the capacitor.
• ఫ్రీక్వెన్సీ (Hz): Connect test leads to the signal source.
• ఉష్ణోగ్రత (°C/°F): Connect the temperature probe to the multimeter and place the probe tip on the object to be measured.
• డయోడ్ పరీక్ష: Connect test leads across the diode.
• Continuity (Buzzer): Connect test leads across the circuit. A beep indicates continuity.
• NCV (నాన్-కాంటాక్ట్ వాల్యూమ్tage) Induction: Hold the NCV sensor near the conductor. The alarm and flashlight will indicate voltagఇ ఉనికి.
• Live Zero Fire Line: Switch to Live mode. Insert the red test lead into the live wire hole. The flashlight will flash red and an alarm will sound for a live wire. No indication for a zero line.

Figure 6: Using the Live Zero Fire Line detection feature.

3.4 డేటా హోల్డ్ ఫంక్షన్

Press the 'HOLD' button on the screen to freeze the current reading on the display. Press it again to release the hold and resume live readings.

3.5 ఫ్లాష్‌లైట్ ఆపరేషన్

The built-in flashlight can be activated by tapping the 'Torch' icon on the screen. This feature is useful for illuminating dimly lit work areas.

Figure 7: Multimeter flashlight in use.

4. నిర్వహణ

4.1 శుభ్రపరచడం

To clean the multimeter, wipe the surface with a soft, damp వస్త్రం. రాపిడి క్లీనర్లు లేదా ద్రావకాలను ఉపయోగించవద్దు. శుభ్రపరిచే ముందు పరికరం పవర్ ఆఫ్ చేయబడిందని మరియు ఏదైనా సర్క్యూట్ల నుండి డిస్‌కనెక్ట్ చేయబడిందని నిర్ధారించుకోండి.

4.2 బ్యాటరీ సంరక్షణ

Recharge the lithium battery regularly, especially if the device will not be used for an extended period, to maintain battery health. Avoid fully discharging the battery frequently.

4.3 నిల్వ

When not in use, store the multimeter in its protective silicone sleeve and the provided storage bag to prevent damage from drops, impacts, and scratches. Store in a cool, dry place away from direct sunlight and extreme temperatures.

5. ట్రబుల్షూటింగ్

This section addresses common issues you might encounter with your ANENG 683 Multimeter.

• పరికరం పవర్ ఆన్ చేయదు:
  Check if the battery is charged. Connect the Type-C charging cable and allow it to charge for at least 30 minutes before attempting to power on again.
• No reading or 'OL' (Overload) displayed:
  Ensure test leads are correctly inserted into the appropriate jacks for the selected measurement function. Verify that the measurement range is suitable for the value being measured (if not in auto-ranging mode). For resistance, ensure the circuit is de-energized.
• సరికాని రీడింగ్‌లు:
  Check test lead connections for looseness or damage. Ensure the correct measurement function is selected. Verify that the component or circuit being tested is stable.
• స్క్రీన్ స్పందించడం లేదు:
  Try restarting the device by powering it off and then on again. Ensure the screen is clean and dry.
• తక్కువ బ్యాటరీ సూచిక:
  Recharge the multimeter using the provided Type-C USB cable.

6. స్పెసిఫికేషన్లు

The following table outlines the technical specifications of the ANENG 683 Smart Digital Multimeter.

Figure 8: Functional specifications table.

7. వారంటీ మరియు మద్దతు

Warranty information for your ANENG 683 Smart Digital Multimeter is typically provided with your purchase documentation. Please refer to the warranty card or contact the retailer/manufacturer directly for details regarding warranty coverage and terms.

For technical support, product inquiries, or assistance with troubleshooting beyond what is covered in this manual, please contact the manufacturer's customer service or the point of purchase. Keep your purchase receipt or order number handy for faster service.