తమియ 95501

Tamiya 95501 Mini 4WD Special Planning Avante Jr. Black Special Instruction Manual

మోడల్: 95501

పరిచయం

This instruction manual provides detailed guidance for the assembly, setup, operation, and maintenance of your Tamiya 95501 Mini 4WD Special Planning Avante Jr. Black Special model kit. The Avante Jr. Black Special is a high-performance 4WD racer featuring a shaft drive mechanism, designed for enthusiasts aged 10 and above. This model emphasizes a distinctive smoked body and black chassis, complemented by hot pink wheels for a striking appearance. Please read this manual thoroughly before beginning assembly to ensure correct construction and optimal performance.

భద్రతా సమాచారం

Please observe the following safety precautions during assembly and operation:

  • చిన్న భాగాలు: This kit contains small parts that may pose a choking hazard. Keep out of reach of small children.
  • పదునైన ఉపకరణాలు: Assembly requires the use of sharp tools. Exercise caution to prevent injury. Adult supervision is recommended for users under 14 years of age.
  • బ్యాటరీలు: Use only the specified battery type (AA batteries x 2). Do not mix old and new batteries, or different types of batteries. Insert batteries with correct polarity. Remove batteries when the model is not in use for extended periods.
  • Adhesives and Paint: If using adhesives or paint (not included), ensure adequate ventilation and follow the manufacturer's safety instructions.
  • ఆపరేటింగ్ ఎన్విరాన్మెంట్: Operate the Mini 4WD in appropriate environments, such as designated Mini 4WD tracks, to prevent damage or injury.

ప్యాకేజీ విషయాలు

అసెంబ్లీని ప్రారంభించే ముందు అన్ని భాగాలు ఉన్నాయని ధృవీకరించండి:

  • Chassis (Type 2)
  • Body (Smoked)
  • Wheels (Large diameter, Hot Pink)
  • Slick Tires
  • Gears (Two types: 5:1 and 4.2:1)
  • మోటార్
  • Screws and other small hardware
  • సూచనల మాన్యువల్ (ఈ పత్రం)
  • Coloring Stickers (Clear type, silver and red lines)

గమనిక: 2 AA batteries, adhesives, paint, and assembly tools are చేర్చబడలేదు మరియు విడిగా కొనుగోలు చేయాలి.

అసెంబ్లీ సూచనలు

The Tamiya 95501 Mini 4WD is a plastic model assembly kit. Follow the detailed diagrams and steps provided in the included paper instruction manual for precise assembly. The general steps are outlined below:

  1. చాసిస్ అసెంబ్లీ: Begin by assembling the Type 2 chassis, which is designed for lightweight and efficient gear operation.
  2. Gearbox Installation: Install the gears into the gearbox. You will choose between two gear ratios: 5:1 for balanced speed and torque, or 4.2:1 for higher top speed.
  3. మోటార్ సంస్థాపన: Securely install the included motor into the chassis.
  4. Axle and Wheel Assembly: Attach the axles, large diameter hot pink wheels, and slick tires. Ensure the tires are firmly seated on the wheels.
  5. శరీర తయారీ: Prepare the smoked body. Apply the specially designed clear type coloring stickers with silver and red lines to enhance the black special appearance.
  6. బాడీ మౌంటింగ్: Mount the completed body onto the chassis.
  7. చివరి తనిఖీలు: Verify all screws are tightened, and moving parts operate smoothly.
Assembled Tamiya Avante Jr. Black Special Mini 4WD car with black body, pink wheels, and 'AVANTE 4 WHEEL DRIVE' spoiler.

Image: The fully assembled Tamiya Avante Jr. Black Special Mini 4WD model, showcasing its distinctive black body, hot pink wheels, and rear spoiler.

సెటప్

Before operating your Mini 4WD, perform the following setup steps:

  • బ్యాటరీ ఇన్‌స్టాలేషన్: Open the battery compartment on the chassis and insert two AA batteries, ensuring correct polarity (+/-). Close the compartment securely.
  • Gear Ratio Selection: During assembly, you selected either the 5:1 or 4.2:1 gear ratio. The 5:1 ratio provides a good balance for general racing, while the 4.2:1 ratio is optimized for higher speeds on less technical tracks.
  • Wheel and Tire Check: Ensure all wheels spin freely and the slick tires are securely attached.

ఆపరేటింగ్ సూచనలు

The Tamiya Mini 4WD is designed for racing on specialized Mini 4WD tracks. It is not a remote-controlled vehicle.

  1. పవర్ ఆన్: Locate the power switch on the chassis and slide it to the "ON" position. The motor will start, and the wheels will begin to spin.
  2. Placement on Track: Carefully place the Mini 4WD onto a Mini 4WD track. The guide rollers will help keep the car on the track.
  3. పరిశీలన: Observe your Mini 4WD as it races. Note its speed and stability.
  4. పవర్ ఆఫ్: When finished, slide the power switch to the "OFF" position.

For optimal performance, ensure the track is clean and free of obstructions.

నిర్వహణ

Regular maintenance will help prolong the life and performance of your Mini 4WD:

  • శుభ్రపరచడం: After each use, gently wipe down the chassis and body with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals.
  • గేర్ తనిఖీ: Periodically inspect the gears for wear or damage. Replace worn gears to maintain smooth operation.
  • మోటార్ తనిఖీ: Ensure the motor is free of debris and spinning efficiently. If performance degrades, consider replacing the motor.
  • టైర్ పరిస్థితి: Check the slick tires for wear or damage. Worn tires can affect grip and speed.
  • బ్యాటరీ కంపార్ట్మెంట్: Keep the battery compartment clean and dry. Remove batteries if storing the model for an extended period.
  • స్క్రూ బిగుతు: Occasionally check that all screws are tight, especially after high-speed runs.

ట్రబుల్షూటింగ్

సమస్యసాధ్యమైన కారణంపరిష్కారం
కారు కదలదు లేదా నెమ్మదిగా కదులుతుంది.
  • బ్యాటరీలు డెడ్ లేదా తప్పుగా ఇన్‌స్టాల్ చేయబడ్డాయి.
  • పవర్ స్విచ్ ఆఫ్ చేయబడింది.
  • Gears are jammed or damaged.
  • మోటారు తప్పుగా ఉంది.
  • Replace batteries with fresh ones; check polarity.
  • పవర్ స్విచ్ "ఆన్" స్థానంలో ఉందని నిర్ధారించుకోండి.
  • Inspect gears for debris or damage; clean or replace as needed.
  • మోటారును మార్చండి.
Car veers off track frequently.
  • Guide rollers are damaged or not installed correctly.
  • Wheels or tires are loose or damaged.
  • Chassis is bent or damaged.
  • Check and adjust guide rollers; replace if damaged.
  • Ensure wheels and tires are securely attached and undamaged.
  • Inspect chassis for damage; replace if necessary.
ఆపరేషన్ సమయంలో అధిక శబ్దం.
  • Gears are not meshing correctly or are damaged.
  • Motor is loose or faulty.
  • Inspect and adjust gears; replace if damaged.
  • Ensure motor is securely installed.

స్పెసిఫికేషన్లు

  • మోడల్ పేరు: Avante Jr. Black Special
  • మోడల్ సంఖ్య: 95501-000
  • బ్రాండ్: తమియా
  • రకం: Mini 4WD Plastic Model Assembly Kit
  • చట్రం రకం: రకం 2
  • డ్రైవ్ సిస్టమ్: షాఫ్ట్ డ్రైవ్ 4WD
  • Included Motor: అవును
  • గేర్ నిష్పత్తులు: 5:1 and 4.2:1 (selectable)
  • టైర్లు: Slick Tires
  • చక్రాలు: Large Diameter, Hot Pink
  • శరీర రంగు: Smoked (Black Special)
  • అవసరమైన బ్యాటరీలు: 2 x AA (చేర్చబడలేదు)
  • సిఫార్సు చేసిన వయస్సు: 10 సంవత్సరాలు మరియు అంతకంటే ఎక్కువ
  • Completed Dimensions (Approximate):
    • పొడవు: 130 మిమీ (5.1 అంగుళాలు)
    • వెడల్పు: 86 మిమీ (3.4 అంగుళాలు)
    • ఎత్తు: 48 మిమీ (1.9 అంగుళాలు)
  • మెటీరియల్: ప్లాస్టిక్

వారంటీ మరియు మద్దతు

Tamiya products are manufactured to high standards. For any questions regarding assembly, missing parts, or product performance, please refer to the contact information provided on the product packaging or visit the official Tamiya website for customer support. Specific warranty details may vary by region; please consult your retailer or Tamiya's official resources for more information.

అధికారిక టామియా Webసైట్: www.tamiya.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.