BONTEC Full Motion TV Wall Mount Instruction Manual

1. పరిచయం

Thank you for choosing the BONTEC Full Motion TV Wall Mount. This manual provides detailed instructions for safe and proper installation, operation, and maintenance of your new TV mount. Please read this manual thoroughly before installation and retain it for future reference. This mount is designed for 26-60 inch LED LCD Flat & Curved TVs with a maximum weight capacity of 88 lbs (40 kgs) and VESA compatibility up to 400x400mm.

2. భద్రతా సమాచారం

• Ensure all components are present and undamaged before installation. Do not use if any parts are missing or defective.
• This product is intended for installation on solid concrete walls, brick walls, or wood stud walls. DO NOT MOUNT ON DRYWALL ALONE.
• Verify the wall structure can safely support the combined weight of the mount and your TV. Consult a qualified professional if unsure.
• Do not exceed the maximum weight capacity of 88 lbs (40 kgs).
• కంటి రక్షణతో సహా ఇన్‌స్టాలేషన్ సమయంలో తగిన భద్రతా గేర్‌ను ఉపయోగించండి.
• ఇన్‌స్టాలేషన్ సమయంలో పిల్లలు మరియు పెంపుడు జంతువులను దూరంగా ఉంచండి.
• Tighten all screws firmly but do not overtighten to avoid stripping or damaging components.

3. ప్యాకేజీ విషయాలు

Please check the package to ensure all parts are included:

Image: Included hardware for the BONTEC TV Wall Mount.

• వాల్ మౌంట్ అసెంబ్లీ
• Concrete Anchors (x3)
• Lag Bolts (x3)
• Washers (φ6mm x3)
• రెంచ్
• TV Mounting Screws: M4*12mm (x4), M4*30mm (x4), M6*15mm (x4), M6*30mm (x4), M8*20mm (x4), M8*50mm (x4)
• Spacers: D8*5mm (x8), D8*10mm (x8)
• Square Washers (M4/M6/M8)

4. స్పెసిఫికేషన్లు

Image: Compatibility and VESA standards for the mount.

5. సెటప్ మరియు ఇన్‌స్టాలేషన్

5.1 ప్రీ-ఇన్‌స్టాలేషన్ తనిఖీలు

• Identify your wall type: Wood Studs, Concrete, or Brick.
• Gather necessary tools: Drill, stud finder (for wood studs), level, pencil, measuring tape, screwdriver.
• Determine the desired height and position for your TV.

Image: Applicable wall types for installation.

5.2 Attaching Brackets to TV

1. మీ టీవీ ముఖాన్ని మృదువైన, శుభ్రమైన ఉపరితలంపై జాగ్రత్తగా ఉంచండి.
2. మీ టీవీ వెనుక ఉన్న VESA మౌంటు రంధ్రాలను గుర్తించండి.
3. Select the correct screws (M4, M6, or M8) and spacers that fit your TV's mounting holes. Use spacers if the TV back is uneven or if screws are too long.
4. Attach the two vertical TV brackets to the back of your TV using the selected screws and washers. Ensure they are securely fastened and level.

5.3 వాల్ ప్లేట్ మౌంట్ చేయడం

1. Mark the desired drilling locations on the wall using the wall plate as a template. Use a level to ensure accuracy.
2. Drill pilot holes at the marked locations. The drill bit size will depend on your wall type and the lag bolts/anchors used.
3. For concrete/brick walls: Insert the concrete anchors into the drilled holes.
4. Align the wall plate with the drilled holes and secure it to the wall using the lag bolts and washers. Tighten firmly.

Image: The BONTEC Full Motion TV Wall Mount.

5.4 టీవీని వేలాడదీయడం

1. With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate.
2. Ensure the TV is securely seated on the wall plate.
3. Tighten any safety screws or locking mechanisms on the TV brackets to prevent accidental dislodgement.

Image: Easy installation process.

6. ఆపరేటింగ్ సూచనలు

The BONTEC Full Motion TV Wall Mount offers various adjustments for optimal viewఅనుభవం:

• స్వివెల్: The mount allows for a swivel range of up to ±90 degrees, enabling you to adjust the TV's horizontal viewing angle. Gently push or pull the TV to the desired position.
• వంపు: You can tilt the TV from +5 degrees (upward) to -10 degrees (downward) to reduce glare and optimize vertical viewing angles. Loosen the tilt adjustment knobs, set the desired angle, and re-tighten.
• స్థాయి సర్దుబాటు: If your TV appears slightly unlevel after installation, you can adjust it by ±3 degrees. Loosen the leveling screws, adjust the TV, and re-tighten.
• పొడిగింపు: The mount can extend from a minimum of 3.15 inches to a maximum of 19.7 inches from the wall, providing flexibility for viewing and accessing cables.

Image: Swivel, Tilt, and Level adjustments for enhanced viewing.

Image: Extended distance from the wall.

7. నిర్వహణ

• అన్ని స్క్రూలు మరియు కనెక్షన్లు బిగుతుగా మరియు సురక్షితంగా ఉన్నాయని నిర్ధారించుకోవడానికి వాటిని క్రమం తప్పకుండా తనిఖీ చేయండి.
• Clean the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Do not apply lubricants to the moving parts unless specifically instructed by the manufacturer.

8. ట్రబుల్షూటింగ్

• టీవీ స్థాయిలో లేదు: Loosen the leveling screws, adjust the TV to the desired level, and re-tighten the screws.
• మౌంట్ వదులుగా అనిపిస్తుంది: Check all wall plate and TV bracket screws. Ensure they are tightened securely. If mounted on wood studs, verify the studs were properly located. If on concrete/brick, ensure anchors are fully seated.
• Difficulty adjusting swivel/tilt: Ensure no cables are snagged or obstructing movement. Check if adjustment knobs/screws are too tight; loosen slightly if necessary.
• తప్పిపోయిన భాగాలు: Refer to the 'Package Contents' section. If parts are genuinely missing, contact BONTEC customer support.

9. వారంటీ మరియు మద్దతు

BONTEC products come with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your package or visit the official BONTEC website. If you encounter any issues or require technical assistance, please contact BONTEC customer support through the following channels:

• Webసైట్: Visit the BONTEC official webతరచుగా అడిగే ప్రశ్నలు మరియు మద్దతు సంప్రదింపు సమాచారం కోసం సైట్.
• ఇమెయిల్: Refer to your product packaging or warranty card for customer service email address.

Please have your model number (MG400-US-FBA) and purchase details ready when contacting support.