VGEBY S810 LED Electric Display Control Panel User Manual

1. పరిచయం

This manual provides detailed instructions for the installation, operation, and maintenance of the VGEBY S810 LED Electric Display Control Panel. Designed for electric bicycles and scooters, this display is compatible with 36V and 48V systems and integrates with JN Controllers and Pasion Electric Motor Kits. Please read this manual thoroughly before use to ensure proper function and safety.

2. భద్రతా సమాచారం

• Always ensure the power is off before installing or removing the display.
• Do not attempt to disassemble or modify the display unit. This may void the warranty and cause damage.
• Keep the display away from water and extreme temperatures.
• విద్యుత్ షార్ట్‌లు లేదా పనిచేయకపోవడాన్ని నివారించడానికి అన్ని కనెక్షన్‌లు సురక్షితంగా ఉన్నాయని నిర్ధారించుకోండి.
• Regularly check the display and wiring for any signs of damage.

3. ఉత్పత్తి ముగిసిందిview

The S810 LED Electric Display provides essential information and control for your electric vehicle. It features an intuitive interface with buttons for power, light control, and mode selection, along with indicators for battery level and thrust settings.

మూర్తి 3.1: ముందు view of the VGEBY S810 LED Electric Display Control Panel, showing the 'ON/OFF', 'LIGHT', and 'MODE' buttons, along with power and thrust indicators. The green connector is visible on the cable.

మూర్తి 3.2: The S810 display with approximate dimensions: 82mm (3.2in) width and 42mm (1.7in) height. The wire length with connector is approximately 21.5cm (8.5in).

మూర్తి 3.3: క్లోజ్-అప్ view of the JULET connector, which ensures a secure and compatible connection to the electric system.

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

4.1 అనుకూలత

• వాల్యూమ్tage: Compatible with 36V and 48V electric systems.
• హ్యాండిల్‌బార్ వ్యాసం: Suitable for 22.2mm (0.87in) diameter handlebars.
• Controller/Motor Kit: Designed for use with JN Controllers and Pasion Electric Motor Kits.
• కమ్యూనికేషన్ ప్రోటోకాల్: The S810 display requires products that are consistent with its communication protocol for proper function.

4.2 సంస్థాపనా దశలు

1. Prepare Handlebar: Ensure the handlebar area where the display will be mounted is clean and free of obstructions. The display is designed for 22.2mm diameter handlebars.
2. మౌంట్ డిస్ప్లే: Position the S810 display on the handlebar in a comfortable and visible location. Secure it using the integrated mounting bracket and screws.


మూర్తి 4.1: వెనుక view of the S810 display, showing the mounting bracket and screw for handlebar attachment.

3. వైరింగ్ కనెక్ట్ చేయండి: Connect the display's cable to the corresponding port on your electric bicycle's controller (e.g., JN Controller). Ensure the JULET connector is fully inserted and secure.

మూర్తి 4.2: The S810 display correctly mounted on a 22.2mm diameter bicycle handlebar, demonstrating its typical installed position.
4. కనెక్షన్‌ని ధృవీకరించండి: After installation, double-check all connections to ensure they are tight and correctly aligned.

5. ఆపరేటింగ్ సూచనలు

The S810 display offers straightforward controls for managing your electric vehicle's functions.

మూర్తి 5.1: కోణీయ view of the S810 display, highlighting the 'ON/OFF', 'LIGHT', and 'MODE' buttons, along with the power and thrust level indicators.

5.1 పవర్ ఆన్/ఆఫ్

• నొక్కండి ఆన్/ఆఫ్ button to power on the display and the electric system.
• నొక్కండి మరియు పట్టుకోండి ఆన్/ఆఫ్ సిస్టమ్‌ను పవర్ ఆఫ్ చేయడానికి బటన్.

5.2 లైట్ కంట్రోల్

• నొక్కండి కాంతి button to turn the vehicle's lights on or off.

5.3 Mode/Thrust Control

• నొక్కండి మోడ్ button to cycle through different thrust levels: తక్కువ, MED (Medium), and అధిక.
• The corresponding indicator lights (Low, Med, High) will illuminate to show the currently selected thrust level.
• The display features a gear memory function, which automatically restores the last selected gear setting upon power-on.

5.4 పవర్ డిస్ప్లే

• The power indicator section (labeled 'POWER') accurately shows the true battery power level.
• The display also records real-time power consumption, allowing you to track your riding mileage effectively.

మూర్తి 5.2: వివరంగా view of the 'POWER' indicator and the 'LOW-MED-HIGH' thrust level indicators on the S810 display.

6. నిర్వహణ

• శుభ్రపరచడం: Wipe the display surface with a soft, damp గుడ్డ. రాపిడి క్లీనర్లు లేదా ద్రావకాలు ఉపయోగించవద్దు.
• తనిఖీ: Periodically check the wiring and connectors for any signs of wear, corrosion, or damage. Ensure the display is securely mounted.
• నిల్వ: If the electric vehicle is stored for an extended period, ensure the display is powered off and stored in a dry, temperate environment.

7. ట్రబుల్షూటింగ్

• డిస్‌ప్లే ఆన్ కావడం లేదు:
  • Check if the main battery of the electric vehicle is charged.
  • Ensure all cable connections, especially the main power cable to the display, are secure.
  • Verify that the display is compatible with your controller's communication protocol.
• Incorrect Power Reading:
  • Ensure the display is correctly configured for your 36V or 48V system (if adjustable, though S810 is typically auto-sensing).
  • Check the battery connections for any loose contacts.
• బటన్‌లు స్పందించలేదు:
  • Power cycle the display by turning it off and on again.
  • బటన్లకు ఎటువంటి చెత్తాచెదారం అడ్డు రాకుండా చూసుకోండి.
• లైట్లు వెలగడం లేదు:
  • Check the connection between the display and the vehicle's lighting system.
  • Verify the lights themselves are functional.

If problems persist, consult a qualified technician or contact customer support.

8. స్పెసిఫికేషన్లు

మూర్తి 8.1: The S810 display shown alongside an electric bicycle and an electric scooter, illustrating its intended applications.

9. వారంటీ మరియు మద్దతు

VGEBY products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.