1. పరిచయం
This manual provides comprehensive instructions for the FoxAlien CNC Offline Controller. This device allows for direct control of compatible FoxAlien CNC router machines without the need for a connected computer, enhancing operational flexibility.
The controller features a touchscreen LCD for intuitive navigation and is designed for use with FoxAlien Masuter 3S, XE-Ultra, and Vasto V1 & V2 series CNC router machines.
2. ఉత్పత్తి ముగిసిందిview
The FoxAlien CNC Offline Controller is a compact, portable unit designed to streamline your CNC operations. It includes a touchscreen interface, an SD card slot for file transfer, and necessary connection cables.
Figure 2.1: FoxAlien CNC Offline Controller, connection cable, SD card, and manual, shown alongside compatible Masuter 3S and Vasto series CNC machines (machines not included).
ముఖ్య లక్షణాలు:
- అనుకూలత: Designed for FoxAlien XE-Ultra, Masuter 3S, and Vasto V1 & V2 series CNC router machines.
- టచ్స్క్రీన్ నియంత్రణ: Intuitive LCD touchscreen for easy operation.
- SD కార్డ్ మద్దతు: Includes an SD card with pre-loaded testing files, allowing immediate use upon receipt. Supports up to 4GB SD cards.
- స్వతంత్ర ఆపరేషన్: Functions as a complete control software, eliminating the need for a computer during engraving processes.
- పోర్టబిలిటీ: Frees your computer for other tasks during long engraving jobs.
3. సెటప్
Follow these steps to set up your FoxAlien CNC Offline Controller:
- SD కార్డ్ని చొప్పించండి: Locate the SD card slot on the side of the controller. Insert the provided SD card firmly until it clicks into place. Ensure the card is inserted correctly to avoid damage.
- Connect to CNC Machine: Use the provided cable to connect the offline controller to your compatible FoxAlien CNC router machine. The cable connects to the 8-pin ISP port on the controller and the corresponding port on your CNC machine.
- పవర్ ఆన్: Ensure your CNC machine is powered on. The offline controller will typically power on automatically once connected to the CNC machine.
- ప్రారంభ బూట్: The controller's LCD screen will display the startup sequence. Once complete, it will show the main control interface.
Figure 3.1: SD Card Slot and 8-pin ISP Port on the FoxAlien CNC Offline Controller.
ముఖ్యమైన గమనిక:
The computer control mode and the offline controller mode cannot be used simultaneously. Always disconnect one before operating the other to prevent conflicts and potential damage to the machine or controller.
Figure 3.2: Switching between Computer Control and Offline Controller Modes.
4. ఆపరేటింగ్ సూచనలు
The touchscreen interface provides intuitive control over your CNC machine. Below are common operations:
4.1. Main Control Screen
చిత్రం 4.1: ప్రధాన నియంత్రణ ఇంటర్ఫేస్.
- తరలించు: Accesses the manual movement controls for X, Y, and Z axes.
- Zero XYZ: Sets the current position of the tool as the origin (0,0,0).
- Z-probe: Initiates the Z-axis probing sequence for automatic tool height setting.
- అన్లాక్: Unlocks the CNC machine motors, allowing manual movement or preparing for operation.
- రీసెట్: Resets the GRBL controller, clearing any active commands or errors.
- తిరిగి: Navigates back to the previous screen or the main menu.
4.2. Manual Movement (Move Screen)
From the main control screen, tap "Move" to access manual axis controls.
Figure 4.2: Manual Movement Screen.
- X+, X-, Y+, Y-, Z+, Z-: Move the respective axes in positive or negative directions.
- దశ: Adjusts the increment for manual movements (e.g., 0.1mm, 1mm, 10mm).
- Spindle/Laser: Controls the spindle or laser module (start/stop, power adjustment).
- వేగం: Adjusts the feed rate for manual movements.
- తిరిగి: Returns to the main control screen.
4.3. Loading and Running G-Code Files
- Prepare G-Code: మీ జి-కోడ్ను సేవ్ చేయండి files (.nc, .gcode, .txt) onto the provided SD card.
- SD కార్డ్ని చొప్పించండి: Ensure the SD card with your G-code files is inserted into the controller.
- యాక్సెస్ File మెను: From the main screen, navigate to the file management or "Run" option (exact menu name may vary slightly based on firmware version).
- ఎంచుకోండి File: బ్రౌజ్ చేయండి files on the SD card and select the desired G-code file.
- ఉద్యోగం ప్రారంభించండి: Confirm your selection and initiate the carving process. The controller will send the G-code commands to the CNC machine.
5. నిర్వహణ
To ensure the longevity and optimal performance of your FoxAlien CNC Offline Controller, follow these maintenance guidelines:
- శుభ్రపరచడం: Gently wipe the touchscreen and controller body with a soft, dry, lint-free cloth. Avoid using abrasive cleaners or solvents.
- నిల్వ: Store the controller in a clean, dry environment away from direct sunlight, excessive dust, and extreme temperatures.
- SD కార్డ్ నిర్వహణ: Always eject the SD card safely from the controller or computer before removing it physically to prevent data corruption.
- కేబుల్ తనిఖీ: Periodically check the connection cable for any signs of wear, fraying, or damage. Replace if necessary.
- ఫర్మ్వేర్ నవీకరణలు: Check the official FoxAlien website for any available firmware updates for the offline controller. Follow the provided instructions carefully for updating.
6. ట్రబుల్షూటింగ్
This section addresses common issues you might encounter with the FoxAlien CNC Offline Controller.
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| కంట్రోలర్ పవర్ ఆన్ చేయదు. | Not properly connected to CNC machine; CNC machine not powered on; faulty cable. | Ensure the cable is securely connected to both the controller and the CNC machine. Verify the CNC machine is powered on. Test with a different cable if available. |
| SD కార్డ్ గుర్తించబడలేదు. | SD card not inserted correctly; corrupted SD card; unsupported card size/format. | Re-insert the SD card. Try a different SD card (ensure it's 4GB max and formatted correctly, e.g., FAT32). Reformat the SD card if necessary (backing up data first). |
| CNC machine does not respond to commands. | Machine is locked; emergency stop engaged; connection issue; GRBL error. | Tap "Unlock" on the controller. Check for any physical emergency stop buttons on the CNC machine. Reset the controller. Verify cable connections. |
| "Computer mode and offline controller mode cannot be used at the same time" error. | Both computer and offline controller are connected or attempting to control the CNC. | Disconnect the computer from the CNC machine before using the offline controller, or vice-versa. |
7. స్పెసిఫికేషన్లు
Detailed specifications for the FoxAlien CNC Offline Controller:
- మోడల్: CNC Offline Controller
- బ్రాండ్: ఫాక్స్ ఏలియన్
- రంగు: నారింజ రంగు
- మెటీరియల్: యాక్రిలోనిట్రైల్ బుటాడిన్ స్టైరీన్ (ABS)
- ప్రదర్శన రకం: LCD టచ్స్క్రీన్
- ప్రదర్శన పరిమాణం: Approximately 2.4 inches (60.96mm x 72mm)
- ఆపరేటింగ్ ఉష్ణోగ్రత: 20°C (68°F)
- SD కార్డ్ మద్దతు: Up to 4GB maximum
- చేర్చబడిన భాగాలు: 1x FoxAlien offline controller, 1x connection cable, 1x SD card (with testing files)
- అనుకూలత: FoxAlien Masuter 3S, XE-Ultra, Vasto V1, and Vasto V2 series CNC router machines.
Figure 7.1: Controller and Cable Dimensions.
8. వారంటీ మరియు మద్దతు
For warranty information and technical support, please refer to the official FoxAlien webసైట్లో లేదా వారి కస్టమర్ సర్వీస్ను నేరుగా సంప్రదించండి. వారంటీ క్లెయిమ్ల కోసం కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదును ఉంచండి.
FoxAlien Official Webసైట్: Visit FoxAlien Store on Amazon
For specific product inquiries or troubleshooting assistance not covered in this manual, please reach out to FoxAlien support.