BSMOOM 7000A Jump Starter & 150 PSI Air Compressor Kit User Manual

1. భద్రతా సమాచారం

ఈ ఉత్పత్తిని ఉపయోగించే ముందు దయచేసి అన్ని భద్రతా హెచ్చరికలు మరియు సూచనలను చదవండి. హెచ్చరికలు మరియు సూచనలను పాటించడంలో విఫలమైతే విద్యుత్ షాక్, అగ్ని ప్రమాదం మరియు/లేదా తీవ్రమైన గాయం సంభవించవచ్చు.

• చేయవద్దు jump start a frozen battery.
• చేయవద్దు use the jump starter if the cables or clampలు దెబ్బతిన్నాయి.
• Ensure proper polarity: ఎరుపు clని కనెక్ట్ చేయండిamp సానుకూల (+) టెర్మినల్ మరియు నలుపు clamp to the negative (-) terminal. Reverse polarity can cause damage.
• clని తీసివేయండిamps promptly: clని డిస్‌కనెక్ట్ చేయండిamps from the vehicle battery immediately after the engine starts.
• పిల్లలకు దూరంగా ఉండండి: ఈ పరికరం బొమ్మ కాదు.
• ఆపరేటింగ్ ఉష్ణోగ్రత: Use the device within the specified temperature range (-4°F to 140°F).
• వెంటిలేషన్: Ensure adequate ventilation when operating the air compressor.
• రక్షణ లక్షణాలు: The device is equipped with multiple protections including over-current, over-temperature, over-voltage, no spark, over-charge, over-discharge, short-circuit, anti-interference, reverse polarity, and low-temperature protection.

Image: BSMOOM Jump Starter with multiple safety protections. This image highlights the advanced safety features of the BSMOOM jump starter, including over-current, over-temperature, over-voltage, no spark, over-charge, over-discharge, short-circuit, anti-interference, reverse polarity, and low-temperature protection.

2. ఉత్పత్తి ముగిసిందిview & భాగాలు

The BSMOOM 7000A Jump Starter & 150 PSI Air Compressor Kit is a versatile device designed for emergency vehicle starting, tire inflation, and portable power supply.

2.1 పెట్టెలో ఏముంది

Image: Contents included in the BSMOOM Jump Starter and Air Compressor Kit. This image displays all items included in the product box: the BSMOOM jump starter unit, smart jumper clamps, air hose, various air nozzles, USB charging cable, and the user manual.

• BSMOOM 7000A Jump Starter Unit
• స్మార్ట్ జంపర్ Clamps (పాజిటివ్ కోసం ఎరుపు, నెగటివ్ కోసం నలుపు)
• Air Hose with Quick Connector
• Various Air Nozzles (for different inflatables)
• USB-C ఛార్జింగ్ కేబుల్
• వినియోగదారు మాన్యువల్
• నిల్వ కేసు

2.2 ఉత్పత్తి లక్షణాలు

• 7000A పీక్ కరెంట్: Capable of starting all gas engines and up to 10.0L diesel engines.
• 150 PSI ఎయిర్ కంప్రెసర్: Cordless inflator with tire pressure detection for various inflatables.
• 26800mAh పవర్ బ్యాంక్: Dual USB-A outputs and one USB-C input/output for charging digital devices.
• 3.4" LCD డిస్ప్లే: Clear display for battery status, pressure readings, and operational modes.
• డ్యూయల్ LED లైట్లు: Features Normal, SOS, and Strobe modes for emergency illumination.
• అధునాతన భద్రతా రక్షణలు: 10 types of protection for safe operation.
• ఆల్-వెదర్ ఆపరేషన్: Designed to function in extreme temperatures from -4°F to 140°F.

Image: BSMOOM 7000A Jump Starter and Air Compressor Kit with accessories. This image displays the BSMOOM 7000A Jump Starter and Air Compressor Kit, including the main unit, heavy-duty jumper clamps (red and black), the flexible air hose with various nozzles, USB charging cables, and a compact carrying case.

Image: Key features of BSMOOM Powerful Car Jump Starter. This graphic highlights key features of the BSMOOM jump starter: 24 months standby time, 99Wh power, LCD screen, 2024 full chip upgrade, 3 LED modes, 10 protection mechanisms, and one-second startup capability.

2.3 కంట్రోల్ ప్యానెల్ మరియు పోర్ట్‌లు

Image: BSMOOM Jump Starter control panel and button functions. An illustration detailing the control panel of the BSMOOM jump starter, showing the functions of each button: Preset Air Pressure Up, Mode/Unit Switching, Power/Inflate Start, Light, and Preset Air Pressure Decrease.

• LCD డిస్ప్లే: Shows battery level, pressure, and mode.
• "M" బటన్: Mode/Unit Switching (e.g., PSI, BAR, KPA).
• "OK" Button: Power/Inflate Start.
• Light Button (*): Activates LED flashlight modes (Normal, SOS, Strobe).
• "+" Button: Preset Air Pressure Increase.
• "-" Button: Preset Air Pressure Decrease.
• జంప్ స్టార్ట్ పోర్ట్: For connecting smart jumper clamps.
• ఎయిర్ హోస్ పోర్ట్: For connecting the air hose.
• USB-A అవుట్‌పుట్ పోర్ట్‌లు (x2): బాహ్య పరికరాలను ఛార్జ్ చేయడానికి.
• USB-C Input/Output Port (x1): జంప్ స్టార్టర్ లేదా బాహ్య పరికరాలను ఛార్జ్ చేయడానికి.

3. సెటప్

3.1 జంప్ స్టార్టర్‌ను ఛార్జ్ చేయడం

Before first use, fully charge the BSMOOM jump starter. It is recommended to charge the device every 3-6 months to maintain battery health, even when not in use.

1. Connect the provided USB-C charging cable to the USB-C input/output port on the jump starter.
2. Connect the other end of the USB-C cable to a USB wall adapter (not included) or a powered USB port.
3. The LCD display will show the charging status. The battery indicator will fill up as it charges.
4. Charging is complete when the battery indicator shows full.

4. ఆపరేటింగ్ సూచనలు

4.1 వాహనాన్ని జంప్ స్టార్ట్ చేయడం

Ensure the jump starter is sufficiently charged (at least 50% battery recommended).

1. దశ 1: Insert the blue plug of the smart jumper clamps into the jump start port on the BSMOOM unit. Ensure it is fully inserted.
2. దశ 2: ఎరుపు (+) clని కనెక్ట్ చేయండిamp వాహనం యొక్క బ్యాటరీ యొక్క పాజిటివ్ టెర్మినల్‌కు నలుపు (-) clని కనెక్ట్ చేయండి.amp వాహనం యొక్క బ్యాటరీ యొక్క నెగటివ్ టెర్మినల్‌కు.
3. దశ 3: Once connected, the smart clamps will indicate readiness (e.g., a solid green light or specific display on the unit). Turn on your vehicle's engine.
4. దశ 4: Immediately after the engine starts, remove the clamps from the vehicle battery. First, remove the black (-) clamp, ఆపై ఎరుపు (+) clamp. Disconnect the smart clampజంప్ స్టార్టర్ యూనిట్ నుండి.

Image: BSMOOM Jump Starter connected to a car battery for emergency starting. An illustration demonstrating the BSMOOM jump starter connected to a car battery, highlighting its capability to start various vehicles including those with 12V, all gas, and 10L diesel engines.

Image: Step-by-step guide for jump starting a car with BSMOOM Jump Starter. A four-step visual guide detailing the quick start car procedure: 1. Insert the starting cable into the starter. 2. Connect the clamps to the car's battery. 3. Turn on the engine. 4. Remove the clamps immediately after starting.

4.2 ఎయిర్ కంప్రెసర్ ఉపయోగించడం

1. Connect the air hose to the air hose port on the jump starter unit.
2. Attach the appropriate nozzle to the air hose for the item you wish to inflate (e.g., tire valve, ball needle).
3. Connect the nozzle to the item. The LCD display will show the current pressure.
4. Press the "M" button to select the desired unit (PSI, BAR, KPA).
5. Use the "+" and "-" buttons to set the desired target pressure.
6. Press the "OK" button to start inflation. The compressor will automatically stop when the target pressure is reached.
7. నాజిల్ మరియు ఎయిర్ హోస్‌ను డిస్కనెక్ట్ చేయండి.

Image: BSMOOM Jump Starter's air compressor inflating a car tire. The BSMOOM device is shown actively inflating a car tire, emphasizing its ultra-fast 150 PSI cordless inflation feature with tire pressure detection. It indicates inflation times for different PSI levels.

Image: BSMOOM Air Pump inflating various items. The image demonstrates the versatility of the BSMOOM 150 PSI ultra-fast inflation wireless digital air pump, showing its use for inflating car tires, motorcycle tires, bicycle tires, and sports balls.

4.3 పవర్ బ్యాంక్‌గా ఉపయోగించడం

1. Connect your digital device's charging cable to one of the USB-A output ports or the USB-C input/output port on the jump starter.
2. Connect the other end of the cable to your digital device.
3. జంప్ స్టార్టర్ మీ పరికరాన్ని స్వయంచాలకంగా ఛార్జ్ చేయడం ప్రారంభిస్తుంది.

Image: BSMOOM Jump Starter used as a power bank to charge mobile devices. This image illustrates the BSMOOM jump starter functioning as a power bank, charging a smartphone and tablet via its USB-A and USB-C output ports, suitable for various digital devices.

4.4 LED ఫ్లాష్‌లైట్ ఉపయోగించడం

1. Press the Light button (*) once to turn on the flashlight in Normal mode.
2. Press the Light button (*) again to cycle through modes: SOS → Strobe → Off.

Image: BSMOOM Jump Starter's bright LED flashlight with SOS and Strobe modes. A visual representation of the BSMOOM jump starter's integrated bright LED flashlight, showcasing its 400-Lumen output and three modes: Normal, SOS, and Strobe, useful for emergencies.

5. నిర్వహణ

• ఛార్జింగ్: Recharge the jump starter every 3-6 months, even if not used, to prolong battery life.
• శుభ్రపరచడం: పొడి, మృదువైన గుడ్డతో యూనిట్‌ను తుడవండి. కఠినమైన రసాయనాలు లేదా రాపిడి క్లీనర్‌లను ఉపయోగించవద్దు.
• నిల్వ: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its carrying case for protection.
• కేబుల్ కేర్: Inspect jumper cables and air hose for any damage before each use.

6. ట్రబుల్షూటింగ్

7. స్పెసిఫికేషన్లు

Image: BSMOOM Jump Starter operating in extreme temperatures. This image illustrates the BSMOOM jump starter's capability to operate reliably in extreme weather conditions, from 140°F (hot) to -4°F (cold).

8. వారంటీ & సపోర్ట్

BSMOOM is committed to providing high-quality products and excellent customer service.

• 12 Months Product Quality Commitment: Your purchase is covered by a 12-month quality commitment from the date of purchase.
• 30 Days Unconditional Return Policy: You may return the product within 30 days of purchase for any reason.
• 24/7 కస్టమర్ సపోర్ట్: For any questions, concerns, or support needs, please contact BSMOOM customer service. We aim to provide a quick reply within 24 hours.

For support, please refer to the contact information provided with your product packaging or visit the official BSMOOM webసైట్.