mGYDY 36V 48V 750W KT 25A Electric Bicycle Controller Kit Instruction Manual

పరిచయం

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your mGYDY 36V 48V 750W KT 25A Electric Bicycle Controller Kit. Please read this manual thoroughly before use to ensure proper function and safety.

ప్యాకేజీ విషయాలు

కింది అంశాలు మీ ప్యాకేజీలో చేర్చబడ్డాయి:

• 1 x 25A Electric Motor Controller
• 1 x LCD5 Display
• 1 x TT009 Thumb Throttle
• 1 x 1T4 Cable

చిత్రం 1: పైగాview of the mGYDY Electric Bicycle Controller Kit components.

స్పెసిఫికేషన్లు

Figure 2: Controller dimensions and basic specifications.

Figure 3: LCD5 Display dimensions and specifications.

Figure 4: TT009 Thumb Throttle specifications.

సెటప్ మరియు ఇన్‌స్టాలేషన్

Proper installation is crucial for the safe and efficient operation of your e-bike kit. Ensure all connections are secure and waterproof where applicable.

Controller Wiring Instructions

Connect the corresponding line interfaces as described below to enable the kit's functions. It is essential to use this kit with a brushless motor and it is only compatible with KT series instrument products.

1. Black Long Wire: Connect to the Motor Wire.
2. Red and Black Single Big Wire: Connect as the Power Cord.
3. Black Long Wire (Fine Hole): Connect to the One for Four/One for Five (9 Cores) cable.
4. Black Line and Red Head: Connect to the Light Line.
5. Black Wire and Yellow Head: Connect to the Power Assist Sensor Wire.

Figure 5: Controller wiring diagram showing various connections.

Figure 6: 1T4 Cable product connector details.

Display and Throttle Installation

The LCD5 display features an open design for easy installation on 22mm diameter handlebars, eliminating the need to remove the bike handlebars. The 1T4 cable connects the display, thumb throttle, and two brake levers to the controller.

Figure 7: LCD5 Display easy installation feature.

ఆపరేటింగ్ సూచనలు

The LCD5 display provides various user parameter setting functions to customize your e-bike's performance.

LCD5 Display Functions

The display shows speed, PAS level, battery level, total mileage, single mileage, light indication, single trip time, and error codes. Refer to the diagram below for button functions and display indicators.

Figure 8: KT-LCD5 e-Bike Display User Manual - Functions and Display.

పారామీటర్ సెట్టింగులు

The display allows setting and adjusting motor parameters, speed measurement parameters, speed limit parameters, power parameters, power auxiliary control parameters, minimum controller voltage, and maximum current parameters. To enter parameter setting mode, press and hold the '+' and '-' buttons simultaneously. Use the '+' and '-' buttons to navigate and adjust values. Press the 'M' button to save and exit.

• P01: Backlight brightness (1-3 levels)
• P02: Change metric (0: Km, 1: Mile)
• P03: బ్యాటరీ వాల్యూమ్tage setting (24V/36V/48V/60V/72V, default 36V). Adjust 36V-60V voltage.
• P04: Hibernate mode time (1-60 minutes, 0: never enter this mode)
• P05: Total assist levels (0-5 levels)
• P06: Wheel size (inch)
• P07: Speed calculation (number of magnets for speed calculation, range: 1-255)
• P08: Speed limit range (0-100km/h)
• P09: Zero speed start (0: zero start, 1: non-zero start)
• P10: డ్రైవింగ్ మోడ్ ఎంపిక
• P11: Assist sensitivity
• P12: Assist starting power
• P13: Assist disc type
• P14: Current limit of controller
• P15: తక్కువ వాల్యూమ్tage protection setting of controller
• P16: ODO distance reset
• P17: Cruise mode selection
• P18: వేగ నిష్పత్తి
• P19: సహాయ స్థాయి
• P20: ప్రోటోకాల్ ఎంపిక

నిర్వహణ

Regular maintenance ensures the longevity and optimal performance of your e-bike kit.

• Keep all components clean and free from dust and debris.
• Regularly check all electrical connections for tightness and signs of wear.
• Ensure waterproof connectors are properly sealed to prevent moisture ingress.
• Inspect cables for any damage or fraying and replace if necessary.
• Store the e-bike in a dry environment when not in use.

ట్రబుల్షూటింగ్

If you encounter issues, refer to the error codes displayed on the LCD5 and the following general troubleshooting tips.

Error Codes (from LCD5 Display)

For any error code, first check all connections. If the issue persists, consult a qualified technician.

వారంటీ మరియు మద్దతు

వారంటీ సమాచారం

ఈ ఉత్పత్తి a తో వస్తుంది 1 సంవత్సరాల తయారీదారు వారంటీ. వారంటీ క్లెయిమ్‌ల కోసం దయచేసి మీ కొనుగోలు రుజువును ఉంచుకోండి. సాధారణ ఉపయోగ పరిస్థితుల్లో తయారీ లోపాలను వారంటీ కవర్ చేస్తుంది.

కస్టమర్ మద్దతు

For technical assistance, troubleshooting, or warranty inquiries, please contact mGYDY customer support through your retailer or the official mGYDY webసైట్.