GONEO 7kW 8A-32A Single-Phase OCPP Charging Station User Manual

1. భద్రతా సమాచారం

Please read this manual carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury. Keep this manual for future reference.

• వృత్తిపరమైన సంస్థాపన: అన్ని స్థానిక మరియు జాతీయ విద్యుత్ కోడ్‌లకు అనుగుణంగా అర్హత కలిగిన ఎలక్ట్రీషియన్ ద్వారా ఇన్‌స్టాలేషన్ నిర్వహించబడాలి.
• పవర్ డిస్‌కనెక్ట్: Always disconnect power to the circuit breaker before performing any installation, maintenance, or wiring.
• పర్యావరణ పరిస్థితులు: Do not operate the charging station outside its specified temperature range (-30°C to 55°C). Ensure the installation location is suitable for its IP65 (waterproof, dustproof) and IK10 (impact protection) ratings.
• కేబుల్ సమగ్రత: Do not use the charging station if the charging cable or connector is damaged.
• వెంటిలేషన్: Ensure adequate ventilation around the charging station.

2. పెట్టెలో ఏముంది

పెట్టెను జాగ్రత్తగా విప్పి, అన్ని వస్తువులు ఉన్నాయని నిర్ధారించుకోండి:

• GONEO 7kW Charging Station
• Wall-mounting accessories (screws, expansion tubes)
• వినియోగదారు మాన్యువల్
• Cable Holder (Empty Socket)
• RFID కార్డ్‌లు (2 ముక్కలు)
• 485 Communication Wire (for specific configurations)

Image: Contents of the product box, showing the charging station, wall-mounting accessories, user manual, cable holder, and RFID cards.

3. సంస్థాపన

3.1 భౌతిక మౌంటు

సురక్షితమైన గోడ మౌంటింగ్ కోసం ఈ దశలను అనుసరించండి:

1. స్థానాన్ని ఎంచుకోండి: Choose a flat, vertical surface capable of supporting the charging station's weight. Ensure sufficient space for cable management and operation.
2. డ్రిల్లింగ్ పాయింట్లను గుర్తించండి: Use the provided wall bracket as a template to mark the drilling points on the wall.
3. డ్రిల్ రంధ్రాలు: Drill holes at the marked points and insert the expansion tubes.
4. మౌంట్ బ్రాకెట్: అందించిన స్క్రూలను ఉపయోగించి గోడ బ్రాకెట్‌ను గోడకు భద్రపరచండి.
5. ఛార్జింగ్ స్టేషన్‌ను అటాచ్ చేయండి: Carefully hang the charging station onto the mounted bracket.

Image: Step-by-step guide for physical installation, illustrating drilling, bracket attachment, and unit placement.

3.2 వైరింగ్ కనెక్షన్

The charging station features a convenient front wiring port for easy installation and maintenance.

1. యాక్సెస్ వైరింగ్ కంపార్ట్‌మెంట్: Use a screwdriver to remove the security screw and open the decorative cover at the bottom of the unit. Then, remove all fixing screws from the wiring cover to access the internal terminals.
2. ప్రధాన శక్తిని కనెక్ట్ చేయండి: Route the main power cables (Live, Neutral, Earth) through the bottom cable hole and connect them securely to the corresponding terminal blocks (L, N, PE).
3. Connect 485 Communication Wire (if applicable): If using 485 communication, prepare the 485 communication wire (485A and 485B). Connect these wires to the provided wiring terminal and then insert the terminal into the designated wire harness inside the unit. Ensure correct polarity (485A on the right side).
4. సురక్షిత కవర్లు: After all connections are made, reinstall the wiring cover and then the decorative cover, ensuring all screws are tightened.

Image: The front wiring port of the charging station, showing the internal terminal blocks for power connections.

3.3 SIM కార్డ్ ఇన్‌స్టాలేషన్

To enable 4G connectivity, install a SIM card:

1. Access SIM Slot: With the wiring compartment open, locate the SIM card holder. Gently catch the bottom of the SIM card holder and pull it out.
2. SIM కార్డ్‌ని చొప్పించండి: Place your activated SIM card into the holder.
3. Reinsert Holder: Carefully insert the SIM card holder back into the SIM slot until it clicks into place.
4. కవర్లను మూసివేయండి: Reinstall the wiring cover and decorative cover.

4. ఆపరేషన్

4.1 పవర్ ఆన్

Once properly installed and connected to power, the charging station will automatically power on. The 4.3-inch TFT screen will display the startup sequence and then show the standby interface.

4.2 ఛార్జింగ్ ప్రక్రియ

The GONEO charging station is compatible with all Type 2 socket electric vehicles.

1. Connect Vehicle: Plug the Type 2 charging connector firmly into your electric vehicle's charging port.
2. Start Charging (RFID): If RFID authentication is enabled, tap your RFID card on the designated area of the charging station to initiate the charging session.
3. మానిటర్ స్థితి: The TFT screen will display real-time charging information.
4. Stop Charging (RFID): To end the session, tap your RFID card again. Disconnect the cable from your vehicle.

Image: Compatibility with Type 2 electric vehicles, showing various compatible car brands.

Image: Using an RFID card to authorize and control charging sessions.

4.3 యాప్ నియంత్రణ

The GONEO app provides advanced control and monitoring features for your charging station.

1. అనువర్తనాన్ని డౌన్లోడ్ చేయండి: Download the 'GONEO' app from the Android Play Store or iOS App Store.
2. Connect Station: Follow the in-app instructions to connect your charging station via 4G, WiFi, or Bluetooth.
3. ఫీచర్లు: The app allows for remote start/stop, setting reservation modes, scheduling charging times, calculating electricity consumption, and monitoring the charging status in real-time.

చిత్రం: పైగాview of the GONEO app's remote control functionalities.

Image: Scheduled charging feature, allowing users to optimize charging times for cost savings.

Image: The GONEO app available for both Android and iOS platforms.

4.4 ప్రదర్శన సమాచారం

The 4.3-inch TFT color screen provides clear and bright real-time charging data, including:

• ఛార్జింగ్ కరెంట్ (Ampకోపం)
• వాల్యూమ్tage
• శక్తి (kW)
• Energy Charged (kWh)
• ఛార్జింగ్ సమయం
• Connectivity Status (WiFi, Bluetooth, 4G, Ethernet)

Image: The 4.3-inch TFT LCD screen showing detailed charging parameters.

5. నిర్వహణ

5.1 శుభ్రపరచడం

Regularly clean the exterior of the charging station with a soft, damp వస్త్రం. రాపిడి క్లీనర్లు, ద్రావకాలు లేదా కఠినమైన రసాయనాలను ఉపయోగించవద్దు, ఎందుకంటే ఇవి సిని దెబ్బతీస్తాయి.asing మరియు స్క్రీన్.

5.2 పర్యావరణ పరిస్థితులు

The GONEO charging station is designed for durability and can withstand various environmental conditions:

• IP65 రేటింగ్: Provides protection against dust ingress and low-pressure water jets from any direction, making it suitable for outdoor use.
• IK10 Rating: Offers high resistance against mechanical impacts.
• ఉష్ణోగ్రత పరిధి: Operates effectively in temperatures ranging from -30°C to 55°C.

Image: The charging station's robust design, suitable for various weather conditions with IP65 and IK10 ratings.

Image: The charging station's ability to function reliably across a wide range of temperatures, from -30°C to 55°C.

6. ట్రబుల్షూటింగ్

If you encounter issues with your GONEO charging station, consider the following:

• శక్తి లేదు: Check the circuit breaker and ensure all power connections are secure.
• ఛార్జింగ్ ప్రారంభం కాలేదు: Verify the charging cable is properly connected to both the station and the vehicle. Ensure RFID authentication is correctly performed if enabled.
• యాప్ కనెక్టివిటీ సమస్యలు: Check your 4G, WiFi, or Bluetooth connection. Ensure the charging station is within range and has a stable network signal.
• ఎర్రర్ కోడ్‌లు: The charging station's display or the GONEO app may show specific error codes. Refer to the app's help section or the full user manual for detailed explanations and solutions for each code.
• నెమ్మదిగా ఛార్జింగ్: Confirm the current setting (8A-32A) is appropriate for your vehicle and electrical supply.

For persistent problems or issues not covered here, please contact GONEO customer support.

7. స్పెసిఫికేషన్లు

Image: Certifications for the GONEO charging station, ensuring safety and quality standards.

8. వారంటీ మరియు మద్దతు

GONEO is committed to providing high-quality products and excellent customer service. With 30 years of experience in electrical appliance research and manufacturing, we have a robust after-sales team ready to assist you.

For any inquiries, technical support, or warranty claims, please refer to the contact information provided in your product packaging or visit the official GONEO webసైట్.