1. ఉత్పత్తి ముగిసిందిview
This replacement kit provides essential components to maintain the cleaning efficiency of your Xiaomi S20, S20+, or B108GL robot vacuum cleaner. Regular replacement of these parts ensures optimal performance and extends the lifespan of your device.
అనుకూలత
This kit is specifically designed for and compatible with the following robot vacuum cleaner models:
- Xiaomi Robot Vacuum S20+
- Xiaomi Robot Vacuum S20 Plus
- Xiaomi Robot Vacuum B108GL
Image: Robot vacuum cleaners illustrating compatibility with S20+, S20 Plus, and B108GL models.
కిట్ కంటెంట్లు
కిట్ కింది భాగాలను కలిగి ఉంటుంది:
- Main Roller Brushes: 2 ముక్కలు
- సైడ్ బ్రష్లు: 6 ముక్కలు
- HEPA ఫిల్టర్లు: 6 ముక్కలు
- Mop Cloths: 6 ముక్కలు
Image: Visual representation of the complete replacement kit contents.
2. ఇన్స్టాలేషన్ గైడ్
Before installing any replacement parts, ensure your robot vacuum cleaner is powered off and disconnected from its charging base. Refer to your robot vacuum's original manual for specific instructions on accessing component compartments.
2.1 Main Roller Brush Installation
- రోబోట్ వాక్యూమ్ను తలక్రిందులుగా చేయండి.
- Locate the main brush cover, usually secured by latches or screws. Open or remove it.
- Remove the old main brush.
- Insert the new main roller brush into its slot, ensuring the ends align correctly with the brush bearings.
- Close or re-secure the main brush cover.
Image: Main roller brush, designed for efficient dust removal and deep cleaning.
2.2 సైడ్ బ్రష్ ఇన్స్టాలేషన్
- రోబోట్ వాక్యూమ్ను తలక్రిందులుగా చేయండి.
- Locate the side brushes. They are typically held in place by a single screw or snap into position.
- Remove the old side brush. If secured by a screw, unscrew it.
- Align the new side brush with the post on the vacuum's underside and press it firmly or secure it with the screw.
Image: Side brushes, effective for cleaning corners and crevices.
2.3 HEPA Filter Installation
- Open the dustbin compartment of your robot vacuum.
- డస్ట్బిన్ను తొలగించండి.
- Locate the filter housing within the dustbin. Remove the old filter.
- Insert the new HEPA filter into the dustbin, ensuring it is seated correctly to create a tight seal.
- Reinstall the dustbin into the robot vacuum.
Image: HEPA filters, capable of capturing fine particles and washable for reuse.
2.4 Mop Cloth Installation
- Locate the mop pad attachment on your robot vacuum. This is typically on the underside or a removable water tank.
- Remove the old mop cloth.
- Attach the new mop cloth to the designated area, ensuring it is securely fastened (e.g., via Velcro or clips).
Image: Microfiber mop cloth, designed for effective and uniform floor cleaning.
3. Maintenance and Replacement Frequency
Regular maintenance and timely replacement of these components are crucial for your robot vacuum's performance and longevity. The frequency of replacement depends on usage, pet presence, and environmental factors.
3.1 Main Roller Brush
- శుభ్రపరచడం: Remove hair and debris from the brush and its ends weekly. The main brush is removable for easier cleaning.
- భర్తీ: Replace every 3-6 months, or when bristles show significant wear or damage.
3.2 సైడ్ బ్రష్లు
- శుభ్రపరచడం: Check for tangled hair and debris weekly.
- భర్తీ: Replace every 3-6 months, or if bristles are bent, broken, or worn, as this affects edge cleaning.
3.3 HEPA ఫిల్టర్లు
- శుభ్రపరచడం: Tap out dust from the filter over a trash can after each cleaning cycle. Some filters can be gently rinsed with water; ensure they are completely air-dried before reinstallation.
- భర్తీ: Replace every 1-3 months, depending on usage and air quality. A clogged filter reduces suction power and air quality.
3.4 Mop Cloths
- శుభ్రపరచడం: Wash the mop cloth after each use. It can be hand-washed or machine-washed with similar colors.
- భర్తీ: Replace every 1-3 months, or when the cloth shows signs of wear, reduced absorbency, or persistent staining.
4. ట్రబుల్షూటింగ్
If you encounter issues after replacing parts, consider the following:
- భాగాలు సరిపోవు: Double-check the compatibility of the kit with your specific Xiaomi robot vacuum model (S20, S20+, B108GL). Ensure all parts are correctly oriented and fully seated in their respective compartments. Some components may require a firm but gentle push to snap into place.
- Reduced cleaning performance: Ensure all brushes are free of tangles and debris. Verify that the HEPA filter is clean and correctly installed, as a misaligned or clogged filter can reduce suction.
- అసాధారణ శబ్దాలు: Check main and side brushes for any foreign objects or hair tangles that might be causing obstruction. Ensure brushes are installed correctly and not rubbing against other parts.
- మాప్ సమర్థవంతంగా శుభ్రం చేయకపోవడం: Ensure the mop cloth is clean and properly attached. Check the water tank (if applicable to your model) for sufficient water and proper flow.
If problems persist, consult your robot vacuum cleaner's original user manual or contact the robot vacuum manufacturer's support.
5. స్పెసిఫికేషన్లు
| బ్రాండ్ | సాధారణమైనది |
| అనుకూల పరికరాలు | Xiaomi S20, Xiaomi S20+, B108GL Robot Vacuum Cleaners |
| చేర్చబడిన భాగాలు | 2 Main Brushes, 6 Side Brushes, 6 HEPA Filters, 6 Mop Cloths |
| పునర్వినియోగం | Mop cloths and some filters are reusable (washable). Brushes are disposable upon wear. |
| యూనిట్ కౌంట్ | 20 Count (total components) |
| వస్తువు బరువు | సుమారు 1.08 పౌండ్లు (మొత్తం ప్యాకేజీ) |
6. వారంటీ మరియు మద్దతు
As a generic replacement kit, specific warranty information may vary. Please refer to the retailer's return policy for details regarding returns or exchanges.
For operational issues related to your Xiaomi robot vacuum cleaner itself, please consult the original manufacturer's documentation or customer support channels.
