ROCKBROS Bike Handlebar End Plugs Light User Manual

1. పరిచయం మరియు ఓవర్view

The ROCKBROS Bike Handlebar End Plugs Light is designed to enhance cycling safety and visibility. This rechargeable light features intelligent sensing capabilities, multiple lighting modes, and a unique sync mode for coordinated lighting. It is built with IPX6 waterproofing to withstand various weather conditions.

Image 1.1: The ROCKBROS Bike Handlebar End Plugs Light installed on a bicycle, showcasing its compact design and red illumination.

2. ప్యాకేజీ విషయాలు

దయచేసి ప్యాకేజీలో అన్ని భాగాలు ఉన్నాయని ధృవీకరించండి:

• ROCKBROS Bike Handlebar End Plugs Light (2 units)
• Mounts for installation
• సంస్థాపన సాధనాలు
• USB ఛార్జింగ్ కేబుల్
• వినియోగదారు మాన్యువల్

3. భద్రతా సమాచారం

Read all instructions before use. Failure to follow these instructions may result in injury or damage to the product.

• Ensure lights are securely mounted before each ride.
• Do not look directly into the light beam to avoid eye strain.
• పిల్లలకు దూరంగా ఉంచండి.
• Use only the provided charging cable or a compatible USB charger.
• Do not disassemble or modify the lights.

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

The handlebar end lights are designed for effortless installation. Use the included mounts and tools to secure the lights into the ends of your bicycle handlebars.

1. Insert the light into the end of your handlebar.
2. Twist the light to adjust its size and ensure a snug fit within the handlebar.
3. Tighten any screws with the provided tools to lock the light securely in place.
4. Verify that both lights are firmly attached and do not wobble before riding.

చిత్రం 4.1: క్లోజప్ view of the ROCKBROS Bike Handlebar End Plugs Light correctly installed on a bicycle handlebar, showing its flush integration.

Image 4.2: Both handlebar end lights illuminated on a bicycle, demonstrating their visibility from the rear.

5. ఛార్జింగ్ సూచనలు

The lights are equipped with a 250mAh battery and charge via a C-mount (USB-C) port.

1. Locate the charging port on each light.
2. Ensure the dust-proof plug is removed before charging.
3. Connect the provided USB charging cable to the light and a compatible USB power source (e.g., computer, wall adapter).
4. సూచిక దీపం ఛార్జింగ్ స్థితిని చూపుతుంది (ఉదా., ఛార్జింగ్ కోసం ఎరుపు, పూర్తిగా ఛార్జ్ చేయబడినందుకు ఆకుపచ్చ).
5. Once fully charged, disconnect the cable and securely fasten the dust-proof plug to maintain IPX6 waterproof performance.

Image 5.1: Visual representation of the 250mAh C-mount charging feature, along with brake detection, static sleep, and life waterproof capabilities.

6. ఆపరేటింగ్ సూచనలు

6.1 పవర్ ఆన్/ఆఫ్

Press and hold the power button for approximately 2 seconds to turn the lights on or off.

6.2 లైటింగ్ మోడ్‌లు

Cycle through the five available lighting modes by short-pressing the power button:

• స్థిరంగా: నిరంతర ప్రకాశాన్ని అందిస్తుంది.
• ఫాస్ట్ ఫ్లాష్: Rapid flashing for high visibility.
• బ్రీతింగ్ ఫ్లాష్: Light fades in and out smoothly.
• Lightning Flash: Irregular, quick flashes.
• High-Frequency Flash: Very rapid, consistent flashing.

Each mode offers 7-13 hours of continuous lighting depending on brightness level.

6.3 Sync Mode

To activate Sync Mode, power on the lights, then double-tap the button on one of the bike lights. A green shimmer will indicate that Sync Mode is active, and both lights will pulsate in harmony at the same frequency and lighting mode.

Image 6.1: Multiple cyclists demonstrating the synchronized flashing of the handlebar end lights, highlighting team visibility.

6.4 Intelligent Sensing

The lights feature intelligent light and vibration sensing:

• బ్రేక్ సెన్సింగ్: The lights automatically highlight when decelerating or braking, providing an instant warning to others.
• లైట్ సెన్సింగ్: In dim surroundings, the lights will automatically illuminate.
• వైబ్రేషన్ సెన్సింగ్: The lights will enter a static sleep mode after 30 seconds of stillness and re-awaken upon detecting vibration. They will remain off during daylight hours when no movement is detected.

7. నిర్వహణ

Proper maintenance ensures the longevity and performance of your lights.

• శుభ్రపరచడం: లైట్లను మృదువైన, డి-స్క్రీన్‌తో తుడవండి.amp గుడ్డ. రాపిడి క్లీనర్లు లేదా ద్రావకాలు ఉపయోగించవద్దు.
• వాటర్ఫ్రూఫింగ్: The lights are IPX6 waterproof. Always ensure the dust-proof plug for the charging port is securely fastened when not charging to maintain water resistance. Do not submerge the lights in water.
• బ్యాటరీ సంరక్షణ: For optimal battery life, charge the lights regularly and avoid complete discharge. If storing for an extended period, charge the battery to about 50% every few months.

Image 7.1: A close-up of the light with water droplets, illustrating its IPX6 waterproof design.

8. ట్రబుల్షూటింగ్

If you encounter issues with your ROCKBROS Bike Handlebar End Plugs Light, refer to the following common solutions:

• లైటు వెలగడం లేదు: Ensure the battery is charged. Press and hold the power button for 2 seconds.
• లైట్లు సమకాలీకరించబడటం లేదు: Ensure both lights are powered on. Double-tap the button on one light to initiate sync mode. Make sure they are within close proximity.
• తక్కువ బ్యాటరీ జీవితం: Ensure the lights are fully charged. Check if they are accidentally left on in a mode with higher power consumption. Verify the intelligent sensing is functioning correctly to prevent unnecessary power drain.
• Light falling off handlebar: Re-check the installation steps. Ensure the light is twisted to expand and fit snugly, and any securing screws are tightened. Consider adding a small amount of friction tape inside the handlebar if the fit is still loose.
• బ్రేక్ సెన్సింగ్ పనిచేయకపోవడం: Ensure the light is firmly mounted and not loose, as movement can interfere with the sensor.

సమస్యలు కొనసాగితే, తదుపరి సహాయం కోసం కస్టమర్ సపోర్ట్‌ని సంప్రదించండి.

9. స్పెసిఫికేషన్లు

10. వారంటీ మరియు మద్దతు

ROCKBROS products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official ROCKBROS webవారంటీ క్లెయిమ్‌ల కోసం మీ కొనుగోలు రుజువును ఉంచండి.