Miuedo G3 WiFi Smart Front Door Lock Set with Handle Instruction Manual

పరిచయం

This manual provides comprehensive instructions for the installation, setup, operation, maintenance, and troubleshooting of your Miuedo G3 WiFi Smart Front Door Lock Set with Handle. Please read this manual carefully before installation and use to ensure proper function and safety. Keep this manual for future reference.

భద్రతా సమాచారం

• తాళాన్ని మీరే విడదీయడానికి లేదా మరమ్మతు చేయడానికి ప్రయత్నించవద్దు. ఇది వారంటీని రద్దు చేసి నష్టాన్ని కలిగించవచ్చు.
• Use only specified 4 AA alkaline batteries. Do not mix old and new batteries or different types of batteries.
• Ensure all components are securely installed before operating the lock.
• Keep backup keys in a safe location outside your home.
• Avoid exposing the lock to extreme temperatures or direct water immersion. The exterior unit is IP63 waterproof, but the interior unit is not.
• Regularly check battery levels and replace batteries promptly when low to prevent lockouts.

ప్యాకేజీ విషయాలు

క్రింద జాబితా చేయబడిన అన్ని వస్తువులు మీ ప్యాకేజీలో చేర్చబడ్డాయని ధృవీకరించండి:

• Miuedo G3 Smart Lock (Exterior Keypad Unit)
• Interior Assembly Unit
• Front Door Handle Set (2 Lever Handles)
• డెడ్‌బోల్ట్ గొళ్ళెం
• స్ట్రైక్ ప్లేట్
• మౌంటు ప్లేట్
• WiFi గేట్‌వే
• 2 IC కార్డ్‌లు
• 2 బ్యాకప్ కీలు
• సంస్థాపన మరలు
• వినియోగదారు మాన్యువల్ (ఈ పత్రం)

Image: All components of the Miuedo G3 WiFi Smart Front Door Lock Set, including the exterior keypad, interior assembly, handle set, deadbolt, WiFi gateway, IC cards, and backup keys.

Video: An unboxing video demonstrating the contents of the Miuedo G3 WiFi Smart Lock package.

ఉత్పత్తి ముగిసిందిview

The Miuedo G3 Smart Lock offers multiple access methods and smart features for enhanced home security and convenience.

Image: Diagram highlighting key features of the Miuedo G3 Smart Lock, including the 360° fingerprint AI reader, backlit keypad, privacy mode, battery cover, Type-C emergency port, and WiFi Gateway.

ఇన్‌స్టాలేషన్ గైడ్

ప్రీ-ఇన్‌స్టాలేషన్ తనిఖీలు

• Ensure your door thickness is between 1.49-1.88 inches (38-48mm).
• Confirm the door hole diameter is 2-1/8 inches (54mm).
• Verify the backset distance (center of deadbolt hole to door edge) is 2-3/8 inches (60mm) or 2-3/4 inches (70mm).
• Check the distance from the mini lock center to the handle center is 5 inches (127mm).
• Ensure the distance from the mini latch center to the bottom hole is 7.87-9.05 inches (200-230mm).
• The bottom hole for the handle should be 3/8 inches (10mm).

Image: Diagram illustrating the required door dimensions and hole placements for installing the Miuedo G3 Smart Lock.

Video: A detailed installation guide for the Miuedo G3 WiFi Smart Lock, showing each step of the process.

దశల వారీ సంస్థాపన

1. డెడ్‌బోల్ట్‌ను ఇన్‌స్టాల్ చేయండి: Adjust the length of the latch to make it T-shaped in the center of the door hole. Ensure the "up" marking on the latch is facing upwards.
2. Install the Front Keypad: Hold the pin level and carefully insert it into the latch mechanism.
3. మౌంటు ప్లేట్‌ను ఇన్‌స్టాల్ చేయండి: Route the cable through the right bottom hole of the mounting plate. Keep the knob vertical during installation. Secure the mounting plate with screws.
4. అంతర్గత అసెంబ్లీని ఇన్స్టాల్ చేయండి: Plug the cable into the port on the interior assembly. Ensure the connector is securely matched with the pins.
5. బ్యాటరీలను చొప్పించండి: Slide the battery cover up and insert 4 AA alkaline batteries into the battery compartment.
6. Test Door Lock: After battery insertion, test the basic locking and unlocking functions.
7. లాచ్ బ్యాక్‌సెట్ సర్దుబాటు: If needed, adjust the latch backset.
8. హ్యాండిల్‌సెట్‌ను ఇన్‌స్టాల్ చేయండి: Attach the exterior handle set to the door.
9. హ్యాండిల్ లివర్‌ను ఇన్‌స్టాల్ చేయండి: Secure the interior handle lever.

సెటప్ మరియు కాన్ఫిగరేషన్

Video: A programming video demonstrating how to set up and configure the Miuedo G3 Smart Lock using the mobile application.

1. యాప్ డౌన్‌లోడ్ మరియు ఖాతా సృష్టి

• For Android devices, search for "Smart Life" in the Google Play Store.
• For iOS devices, search for "Smart Life" in the App Store.
• Sign up and log into your account using an email address.

2. Adding the Smart Lock to the App

1. మీ స్మార్ట్‌ఫోన్‌లో బ్లూటూత్ ప్రారంభించబడిందని నిర్ధారించుకోండి.
2. స్మార్ట్ లైఫ్ యాప్‌ని తెరవండి.
3. Click the "+" icon in the upper right corner, then select "Add Device".
4. Touch the keypad of the smart lock to wake it up.
5. The app should discover the lock. Select it and pair your phone with the Smart Lock.

3. Selecting Door Opening Direction

• In the app, navigate to "more" → "Unlock Direction".
• Face the touchscreen of the lock and locate your door hinges.
• Select "Left" if your door hinges are on the left side.
• Select "Right" if your door hinges are on the right side.

ఆపరేటింగ్ సూచనలు

Your Miuedo G3 Smart Lock offers multiple convenient ways to unlock your door:

Image: Visual representation of the various unlocking methods available for the Miuedo G3 Smart Lock: APP unlock, password unlock, fingerprint unlock, physical key unlock, IC card unlock, and smart voice unlock.

1. వేలిముద్ర అన్‌లాక్

Place your registered fingerprint on the fingerprint sensor located on the top of the keypad. The lock will unlock if the fingerprint is recognized.

2. Passcode Unlock

Enter your registered passcode on the electronic keypad, followed by the '#' key. The lock will unlock if the passcode is correct.

• Anti-Peep Passcode: You can enter random digits before and after your actual passcode to prevent others from guessing your code. For example, if your passcode is 123456, you can enter 987123456321.
• Managing User Codes: The app allows you to manage up to 150 user codes, including permanent, timed, one-time, and custom codes for various users (family, renters, delivery personnel, etc.).

3. IC Card Unlock

Tap a registered IC card against the card reader area on the keypad. The lock will unlock upon successful recognition.

4. Physical Key Unlock

In case of emergency or battery depletion, use the provided backup physical keys to manually unlock the door.

5. APP Remote Control

With the Miuedo WiFi Gateway connected, you can remotely lock/unlock your door, monitor access logs, and receive real-time notifications via the Smart Life app on your smartphone from anywhere.

6. Voice Control (Alexa/Google Assistant)

Integrate your smart lock with Alexa or Google Assistant for convenient voice commands to lock or unlock your door.

Image: A user interacting with Alexa to unlock the Miuedo G3 Smart Lock, demonstrating voice control capabilities.

7. Auto-Lock & One-Touch Locking

• తనంతట తానే తాళంవేసుకొను: Configure the auto-lock interval (5-900 seconds) via the app. The lock will automatically engage after the set time.
• వన్-టచ్ లాకింగ్: Press and hold the '#' key on the keypad for instant locking.

Image: Illustration of the auto-lock feature of the Miuedo G3 Smart Lock, showing the adjustable time interval for automatic locking.

నిర్వహణ

1. బ్యాటరీ లైఫ్ మరియు రీప్లేస్‌మెంట్

The lock operates on 4 AA alkaline batteries (not included) and can last up to 1 year. The app will provide low battery reminders. Replace all four batteries simultaneously when prompted.

• పునర్వినియోగపరచదగిన బ్యాటరీలను ఉపయోగించవద్దు.
• If batteries are completely depleted, use the Type-C emergency power port or the physical backup key to gain entry.

Image: Information graphic stating "Up to 1 Year Battery Life" for the Miuedo G3 Smart Lock, with notes on battery type and low battery reminders.

2. శుభ్రపరచడం

Wipe the lock's exterior surfaces with a soft, damp వస్త్రం. ముగింపు లేదా ఎలక్ట్రానిక్ భాగాలను దెబ్బతీసే రాపిడి క్లీనర్‌లు లేదా ద్రావకాలను ఉపయోగించకుండా ఉండండి.

ట్రబుల్షూటింగ్

లాక్‌ను రీసెట్ చేస్తోంది

If you encounter persistent issues or need to clear all user data, you can reset the lock using one of the following methods:

Video: A video demonstrating two methods to reset the Miuedo G3 Smart Lock to its factory settings.

Method 1: Battery Removal and Double Locking Button

1. కీప్యాడ్‌ని లైట్ చేయడానికి దాన్ని తాకండి.
2. Remove one battery from the compartment. Wait for 3 seconds, then reinsert it. The keypad should light up again.
3. Press and hold the double locking button (usually on the interior unit) for 10-15 seconds until you hear the voice prompt "Initialization successful". The reset is complete.

Method 2: Circuit Board Reset Button

1. బ్యాటరీ కంపార్ట్మెంట్ నుండి అన్ని బ్యాటరీలను తీసివేయండి.
2. Remove the 3 screws from the back panel of the interior unit to expose the circuit board.
3. Reinsert the batteries into the battery compartment.
4. Press and hold the reset button on the circuit board until you hear the voice prompt "Initialization successful". The reset is complete.

గమనిక: Keep the cable connected and batteries properly installed during Method 2.

Other Common Issues

• లాక్ స్పందించడం లేదు: Check battery levels. Ensure the keypad is clean and free from obstructions.
• వేలిముద్ర గుర్తించబడలేదు: Ensure your finger is clean and dry. Try re-registering your fingerprint in the app.
• యాప్ కనెక్టివిటీ సమస్యలు: Verify your WiFi Gateway is powered on and connected to your home network. Ensure Bluetooth is enabled on your phone.
• Incorrect door opening direction: Follow the steps in the "Selecting Door Opening Direction" section to adjust the setting in the app.

స్పెసిఫికేషన్లు

వారంటీ మరియు మద్దతు

Miuedo is committed to providing excellent customer service.

• ఆనందించండి 3 years of Free Return service.
• ప్రయోజనం పొందండి Life-time free technical support.
• For any questions or assistance, please feel free to contact Miuedo customer service. Refer to your purchase documentation for specific contact details.