mGYDY Bafang 810S LCD eBike Display User Manual

1. పరిచయం

This manual provides essential information for the installation, operation, and maintenance of your mGYDY Bafang 810S LCD eBike Display. Please read this manual thoroughly before using the product to ensure proper function and safety.

2. భద్రతా సమాచారం

• రైడింగ్ చేసే ముందు డిస్‌ప్లే ఎల్లప్పుడూ సురక్షితంగా మౌంట్ చేయబడిందని నిర్ధారించుకోండి.
• డిస్‌ప్లేను విడదీయడానికి లేదా సవరించడానికి ప్రయత్నించవద్దు. ఇది వారంటీని రద్దు చేసి నష్టాన్ని కలిగించవచ్చు.
• Keep the display away from extreme temperatures and direct sunlight for prolonged periods.
• Ensure all connections are dry and properly sealed before use, especially in wet conditions.
• Pay attention to your surroundings while riding. Do not become overly distracted by the display.

3. ప్యాకేజీ విషయాలు

ప్యాకేజీలో అన్ని అంశాలు ఉన్నాయని నిర్ధారించుకోండి:

• 1 x Bafang 810S LCD Display
• 1 x Display Holder
• Gaskets for installation

4. ఉత్పత్తి ముగిసిందిview

The mGYDY Bafang 810S LCD eBike Display is designed to provide essential riding data and control for your Bafang mid-drive motor system. It features a color VA LCD screen for clear visibility in various lighting conditions.

చిత్రం: పైగాview of the Bafang 810S display showing various instrument features such as headlamps, speed loop, battery display, speed display, assist gear, fault prompt, walking mode, brake prompt, mileage mode, and mileage display.

ముఖ్య లక్షణాలు:

• Color VA LCD: వెడల్పు viewing angle, no flicker, high brightness for better visual effect under sunlight.
• Independent Button: Easy to operate interface.
• సమగ్ర డేటా ప్రదర్శన: Speed (Real-time, MAX, AVG), Mileage (Odometer, Trip distance, Riding Time), Battery indicator (5-level, Voltagఇ శాతంtagమరియు).
• సర్దుబాటు ప్రకాశం: Day and Night Mode with 5-level brightness adjustment (1: darkest; 5: brightest).
• Assistant Level Control: 3, 5, or 9 adjustable assist levels.
• నడక మోడ్: Provides assistance when walking alongside your e-bike.
• లోపం కోడ్ ప్రదర్శన: Indicates system faults.
• జలనిరోధిత గ్రేడ్: IP65, resistant to rain and splashing water.

5. స్పెసిఫికేషన్లు

చిత్రం: Detailed product parameters including dimensions, power supply, waterproof grade, and communication protocol.

6. సెటప్ మరియు ఇన్‌స్టాలేషన్

అనుకూలత తనిఖీ:

The 810S display is designed for Bafang mid-drive motors (BBS01, BBS02, BBSHD) that use the UART కమ్యూనికేషన్ ప్రోటోకాల్ మరియు ఎ 5-pin female plug. It is not compatible with CAN protocol motors or male plugs.

చిత్రం: Visual guide for checking compatibility with UART protocol 5-pin female connectors and Bafang BBS series or hub motors. Incompatible with CAN protocol motors.

ఇన్‌స్టాలేషన్ దశలు:

1. డిస్‌ప్లేను మౌంట్ చేయండి: Install the 810S display holder on the left side of your e-bike's handlebar. The holder is designed for handlebars with a diameter of φ22.2mm (0.87in). Secure it firmly using the provided gaskets and screws.
2. కేబుల్ కనెక్ట్ చేయండి: Carefully connect the 5-pin female plug of the display to the corresponding 5-pin male plug on your e-bike's wiring harness. Ensure the connection is secure and fully seated.
3. కేబుల్ నిర్వహణ: Route the display cable neatly along the handlebar and frame, securing it with cable ties to prevent interference with moving parts.
4. ప్రారంభ పవర్-ఆన్: After installation, power on your e-bike to verify the display functions correctly.

7. ఆపరేటింగ్ సూచనలు

The 810S display features an intuitive interface with an independent button for navigation and settings.

ప్రదర్శన విధులు:

• వేగం సూచిక: Shows real-time speed, maximum speed (MAX), and average speed (AVG).
• మైలేజ్ సూచిక: Displays Odometer (total distance), Trip distance, and Riding Time.
• బ్యాటరీ సూచిక: Provides a 5-level power indicator and voltagఇ శాతంtage for accurate battery status.
• Assistant Level: Adjust pedal assist levels from 0-9 (or 3/5/9 depending on configuration).
• హెడ్‌లైట్ నియంత్రణ: Activate or deactivate your e-bike's headlight (if connected).
• నడక మోడ్: Engage for low-speed assistance when pushing the bike.
• ఎర్రర్ కోడ్: Displays codes if a system fault is detected.

చిత్రం: The intelligent instrument panel displaying electricity, speed, current gear, battery level prompt, speed display, PAS levels, walking mode, and mileage time.

సెట్టింగ్‌ల సర్దుబాటు:

• ప్రకాశం సెట్టింగ్: Toggle between Day and Night modes. Adjust brightness through 5 levels (1 being darkest, 5 brightest) to suit ambient light conditions.
• Metric / Imperial: Set units according to your preference (Km/h or Mph, Km or Miles).
• Power-on Password: Configure a password for added security (refer to your e-bike controller manual for specific instructions if applicable).

చిత్రం: Illustration of the display's brightness adjustment feature, showing optimal visibility in both day and night conditions.

8. నిర్వహణ

Proper maintenance ensures the longevity and optimal performance of your 810S display.

• శుభ్రపరచడం: ఒక మృదువైన ఉపయోగించండి, డిamp cloth to clean the display screen. Avoid abrasive cleaners or solvents that could damage the screen or casing.
• నీటి నిరోధకత: The display has an IP65 waterproof rating, meaning it is protected against dust and low-pressure water jets. While it can withstand rain and splashes, avoid submerging it in water or exposing it to high-pressure washing.
• నిల్వ: When not in use for extended periods, store the e-bike and display in a dry, cool place, away from direct sunlight and extreme temperatures.
• కనెక్షన్ తనిఖీ: Periodically check the cable connection for any signs of wear or corrosion. Ensure it remains securely plugged in.

చిత్రం: The Bafang 810S display demonstrating its IP65 waterproof capability, showing it can resist rain and water splashing.

9. ట్రబుల్షూటింగ్

If you encounter issues with your 810S display, refer to the following common troubleshooting tips:

• డిస్ప్లే ఆన్ కావడం లేదు:
  • Check if the e-bike battery is charged and turned on.
  • Verify that the 5-pin cable connection between the display and the controller is secure and undamaged.
• No Speed/Mileage Data:
  • Ensure the speed sensor on your e-bike is properly installed and aligned.
  • Check for any loose connections to the speed sensor.
• ఎర్రర్ కోడ్ ప్రదర్శించబడింది:
  • Note down the error code. Refer to your Bafang motor or controller manual for specific error code meanings and solutions.
  • Often, turning the e-bike off and on again can clear temporary errors.
• సరికాని రీడింగ్‌లు:
  • Ensure the wheel circumference setting in the display's advanced settings (if accessible) matches your e-bike's wheel size.

సమస్యలు కొనసాగితే, సహాయం కోసం విక్రేతను లేదా అర్హత కలిగిన ఇ-బైక్ టెక్నీషియన్‌ను సంప్రదించండి.

10. వారంటీ మరియు మద్దతు

For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for warranty claims.